Multi Commander > Support and Feedback
FTP I cannot connect
beemak:
I am unable to get FTP to work on MC. I have filled in:
ftp site, username, and password. I cannot connect.
(However I have no problem with FTP on Total Commander).
What am I doing wrong?
Mathias (Author):
What does the FTP log say? . if you behind a firewall /route you might also need to check "Use Passive Mode"
beemak:
Passive mode checked. Results as follows:
2012-11-14 14:36:14 = Connection to site : ftp.fryettarchitect.com on port 216
2012-11-14 14:36:14 = The requested name is valid, but no data of the requested type was found.
2012-11-14 14:36:22 = Connection to site : ftp.fryettarchitect.com on port 216
2012-11-14 14:36:22 = The requested name is valid, but no data of the requested type was found.
Mathias (Author):
That is a system error message from windows, that means that it finds a DNS entry for the requested domain name when doing IP lookup. But it did not receive an IP address in that entry.
I would guess that maybe you have a firewall\router that messes with the DNS requests ?
A workaround might be to entire the IP address instead of domain name.
beemak:
Used the FTP address.
2012-11-19 13:13:53 = Connection to site : 216.16.233.197 on port 21
2012-11-19 13:13:54 < 220 Microsoft FTP Service
2012-11-19 13:13:54 > USER FryettArchitects
2012-11-19 13:13:54 < 331 Password required for FryettArchitects .
2012-11-19 13:13:54 > PASS (hidden)
2012-11-19 13:13:54 < 530 User FryettArchitects cannot log in.
2012-11-19 13:13:54 = Command failed
Navigation
[0] Message Index
[#] Next page
Go to full version