Messages

3426

Feature Requests and Suggestions / Re: "Copy here" Not possible to "drop" the file in same directory

« on: March 05, 2013, 13:00:34 »

You can drop on column header when dragging from another window to drop in current path.

Use hotkeys.. it is the recommended and faster way to copy files. drag and drop is only there to support the basic needs and will only give you limited control.

3427

Feature Requests and Suggestions / Re: File Search Confusion

« on: March 05, 2013, 12:50:25 »

I just spent quite a while searching for the search operation in the interface.
I finally found it under the "Extensions" menu.

Because search is an extension, and MC is built around a extension/plugin architecture.

It's surprising to me to see what I think is a basic functionality in the "Extensions" area.
Of course it is no problem for me now, that i know it, but it could be for others.
Any chance to give it a more natural home in the tree, such as under "File" or "Edit"?

No, that is not possible.

Another thing that caused confusion: There is an icon with a magnifying glass in the toolbar.
If my experience is anything to go by, the magnifying glass usually represents Searching.

Problem is that view/inspect file and search often uses similar icons.

3428

Feature Requests and Suggestions / Re: "Copy here" Filename conflict with existing Target file

« on: March 05, 2013, 12:42:18 »

If you copy files using copy/paste ("Copy here" ? MC does not have this ? ) from the context menu (right click menu) then most likely the copying is NOT done by Multi Commander, but probably by Windows Explorer or some other shell extension.

The Right click menu that is show is the Windows Explorer context menu.  So Windows Explorer controls what does show in it.

To copy using MC press the Copy button or Hotkey for copy.

3429

Feature Requests and Suggestions / Re: reset view filter by default to ""(empty) and when changing path

« on: March 05, 2013, 06:51:01 »

I don't understand what you want..

*.* is the same as "" (empty)

Ctrl+F , write new filter, return, done,.

3430

Feature Requests and Suggestions / Re: reset view filter by default to ""(empty) and when changing path

« on: March 04, 2013, 22:44:32 »

Explorer Panel Settings > Layout (tab)
[.] Reset filter to *.* when changing path

This will reset the view folder when leaving a path

3431

Support and Feedback / Re: How to remove "date" from panel browsing

« on: March 04, 2013, 16:29:09 »

You have to change the "default" column profile.

Right click columns, Customize columns Sets, select "[Default]" and change that.

3432

Support and Feedback / Re: "Go up" by double-clicking

« on: March 02, 2013, 14:22:43 »

Yes.. It is a bit tricky to find.

Menu > Configuration > Explorer Panel

Then go to the "Mouse Configuration" Tab

And for "Mouse Action Options" there is a settings for the Action "Open Folder / Execute File" that is named
[.] Go to parent folder if click was on empty area.

Check that.

3433

Support and Feedback / Re: QuickLaunch Bar

« on: March 02, 2013, 14:17:51 »

Relative paths should work.
A button is coming there that will translate a path to a relative path.  (Just like in FileType Setup)

3434

Support and Feedback / Re: Quick Search ( Match from Beginning of Filename )

« on: March 02, 2013, 14:16:10 »

There are two possible cases here..
First is if Cyrillic letter fails to open the quick searchbox and the second is if Cyrillic letter is now shown in the quckseach box after it has been shown.

What I mean is if you start a quick search with a A-Z letter so that the quicksearch box is show. does it after that works with Cyrillic symbols. ?

3435

Support and Feedback / Re: How can i disconnect from FTP?

« on: March 01, 2013, 10:26:12 »

Or maybe closing FTP-tab should disconnect?

No that would not work.

When you connect to a FTP site that path is connected to a virtual device (0:\ , 1:\,  2\ and so on) that is inserted into the Virtual filesystem inside MC.
And ANY Explorer Panel ( or other extension that browse the MC Virtual filesystem) will be able to see this device.
No tab is owning a filesystem device. You can start FTP from one tab and then browse to it from another.

3436

Feature Requests and Suggestions / Re: Disable auto expand tree?

« on: March 01, 2013, 10:21:21 »

It is not currently possible.. I think..

3437

Feature Requests and Suggestions / Re: Proxy support for FTP

« on: March 01, 2013, 08:45:06 »

Everything is possible

There is some kind of proxy support in the FTP code I use.  (But it will not use IE settings for proxy). But I do not know how well it works and for what types of proxy it works. And I have not tested it.

FTP over proxy is messy and very time consuming to add. I got it on my list. But before I can do anything with it I need more information about how it works and how to test and stuff. And I have not had the time for that yet.




 

3438

Support and Feedback / Re: How can i disconnect from FTP?

« on: March 01, 2013, 08:25:24 »

See http://forum.multicommander.com/forum/index.php/topic,779.0.html

3439

Support and Feedback / Re: Startup position and folders

« on: February 26, 2013, 09:12:55 »

Think so.. or you can use the -L= and -R= parameter to really specify left / right

3440

Support and Feedback / Re: Startup position and folders

« on: February 26, 2013, 07:14:37 »

To force what paths tabs should show at startup you control that using commandline parameters.

Go to Doc

3441

Support and Feedback / Re: Phone to Drive letter

« on: February 25, 2013, 18:12:46 »

It will only be visible if Windows connect a drive letter to it. and windows will only do that is it can recognize the device as a storage device.

3442

Support and Feedback / Re: Why some folders are omitted in a MC window

« on: February 25, 2013, 13:37:12 »

Some folder must have the System or Hidden attribute set or they would be shown.

3443

Support and Feedback / Re: How to not filter sub-directories?

« on: February 21, 2013, 21:36:43 »

"*.sql /*"

View filter starting with / specify a folder filter. so *.sql for only the sql files and /* to show all folders.

3444

Support and Feedback / Re: How to disconnect FTP connection?

« on: February 20, 2013, 22:17:43 »

Press the Disconnect/Eject button.  Second to last button of the button after the Free space area.

http://multicommander.com/docs/ExplorerPanel-Layout #7

3445

Feature Requests and Suggestions / Re: add advanced context menu

« on: February 20, 2013, 17:41:48 »

Something like that is on my list of things to add.  It does however require a big portion of time to add it. It it has been push a side a bit by other more important things. But it still very high up on the list.

 

3446

Support and Feedback / Re: Hide Registry

« on: February 19, 2013, 16:44:21 »

Delete the plugin <mcinstall>\Extensions\FSRegistry

3447

Beta Releases / Multi Commander v3.0 BETA Build 1348

« on: February 18, 2013, 21:41:40 »

Multi Commmander v3.0 (Build 1348) -  315+ Changes

Changes since build 1345

ADDED - More Custom Commands are now using the MultiLanguage system for the description texts.
FIXED - Sorting issue with new option that forces folders to be sorted by name
FIXED - When changing some settings a refresh is forced. (Not valid for all settings.)
FIXED - Blank icon issue with MultiRename tools or Checksum (SFV) tool


Previous changes

How to update to beta version

3448

Beta Releases / Re: Multi Commander v3.0 BETA Build 1345

« on: February 18, 2013, 13:17:51 »

But the problem with the autosize function is a real problem xD I just switch betwenn Autosize Columns and not Autosize Columns (restart MC after changing that)

You do not need to restart when changing that option.

I can not recreate an problem when doing that, might be that the issue only happen after something else also been done or something.

3449

Beta Releases / Re: Multi Commander v3.0 BETA Build 1345

« on: February 18, 2013, 12:57:39 »

If the new folder sort is enabled, i can't sort any other way. For example if i try to sort by date it shows the same order than before.

Yes.. It will lock folders to be sorted A->Z and the normal sorting will only affect files.

3450

Beta Releases / Re: Multi Commander v3.0 BETA Build 1345

« on: February 18, 2013, 12:56:05 »

Autosize Colums doesn't work correctly. The first column (in my case filename) is compressed. It occurs since the new Version of MutliCommander.

Nothing with columns is changed, But switching from using folder tree and different view mode it can happen that it start to remember the wrong value.
Right click on column header and select "Use column sets > Default"