Messages

26

Support and Feedback / Re: Columns for Metadata?

« on: October 23, 2021, 12:52:31 »

Right click on column header and go to customize column.. And you can add some column with meta data.
However Author and title is currently not available

27

Support and Feedback / Re: Auto sorting now working right?

« on: October 20, 2021, 12:20:49 »

When changing settings for Explorer Panel it affects all panels so they should get the same settings.
I'm not able to recreate it. Both panels resorts for me. Sure you are sorting on the name column in both panels ?

28

Support and Feedback / Re: Tabs are getting reset to С:\ drive after MC restart

« on: October 18, 2021, 12:06:00 »

Menu> Configuration > Explorer Panel settings > Display (Tab)
Under "Save on exit" near the bottom uncheck "Remember only path to local hard drive"

29

Support and Feedback / Re: Silent move?

« on: October 13, 2021, 08:12:51 »

You do not get a progressbar with F4/F6 ? but with DragDrop ?
You get sound with DragDrop and not with F4/F6 ?

That is strange because drag and drop will call the exact same operation that F4/F6 do.
If you move a file on same drives.. It is not copied. it is renamed. and Moved on the same drive directly without have to read/write all the data. so it jumps to 100% directly

Not sure why this happening to you, I cannot recreate anything like that.

30

Support and Feedback / Re: Silent move?

« on: October 12, 2021, 11:45:35 »

It does not show the popup or make the noise for Ctrl-X/V moves. But it does for drag/drop between windows. And it didn't do this at all before the recent update. It never says there is an error but it doesn't auto close the popup even though the auto-close option is selected. And it makes the noise regardless of being 100% completed and seemingly no errors. This is just a normal drag/drop between two normal folders like between Download folder and Documents folder. I tried a complete uninstall and reinstall and it still does it on the fresh install.

MC do not handle the copy in the case of paste (Ctrl+V) normally. When MC receives Ctrl+V the paste command is sent to Windows to do a paste in a specified folder..
So MC do not handle any copy of that.

I cannot recreate any issue using drag and drop. And there have been no recent changes there so that is strange.

If you copy using the copy shortcut  F5/F2 (depending on setup) so the internal copy process is used. You get the same issue there or only for drag and drop?

You sure there was not an error, even in the logfile (Ctrl+L, FileOperations log), Most of those sounds are because and error happened. (Can be a minor error han did not cause any issue during the filecopy, so you did not get a error dialog. )

31

Support and Feedback / Re: Silent move?

« on: October 11, 2021, 22:26:19 »

Well the progress bar will always be shown. But you can configure it to autoclose,  You disable the Confirm and option dialog (by doing that you will no longer be able to use any of the advanced copy features)
Hmm I do not get it to play sound unless there is an error.. then it is a "boing " sound.
Also the progressbar is not stuck for me.

So are you doing some special copy operation that is not just a simple drag and drop a file on a disk to another disk ?

32

Support and Feedback / Re: Directory headings change randomly (bug?)

« on: October 11, 2021, 22:20:44 »

I have not been able to recreate anything like that.

Not sure I understand the issue. When do this happen ? when you change ViewMode ?? Go from List ViewMode to Detailed ViewMode ?, the column get so width the are out of view?
Are Horzontal scrollbar shown then ? 
Settings.
Explorer panel settings > Display (Tab) > Under "Sorting and columns" is "Autosize columns" enabled or disabled ?

33

Support and Feedback / Re: Quick Launch Bar

« on: October 11, 2021, 14:12:48 »

Font? There is no text there. Or do you mean the text for the tooltip ? Changing IconSize control the higher of the bars.

34

Support and Feedback / Re: Silent move?

« on: October 11, 2021, 14:11:04 »

Core Settings > FileSystem

35

Support and Feedback / Re: FTP options

« on: October 11, 2021, 14:09:28 »

It all depends on the FTP server.. some server show more if using another LIST command and some other do not support it.
The plan is to support so you can modify what LIST command and parameters to use for you site, However it depends on the FTP server that is connected.

36

Support and Feedback / Re: Bug when double clicking a file

« on: October 06, 2021, 07:30:46 »

I have not been able to recreate that.
have you defined any custom action for it in FileTypeSetup ? or just running default so notepad is launched ?

37

Support and Feedback / Re: Bug with drive toolbar

« on: October 06, 2021, 07:28:22 »

I will look into that

38

Support and Feedback / Re: Losing focus on panel after FTP connection is established

« on: October 06, 2021, 07:27:45 »

Look like it happens only the first time a connection is done.. I will look into it

39

Support and Feedback / Re: How to Expand All Subdirectories & List Folder Contents without left panel

« on: September 28, 2021, 23:58:31 »

Sorry.. Not possible

40

Feature Requests and Suggestions / Re: Path column display customization for search results

« on: September 25, 2021, 11:57:14 »

Something like that are in the pipeline. But it will not be an option since it depends on what you are shown. sometimes you want one way and sometimes the other.. So it will be some way so you can toggle between the modes fast. without going into settings and changing

41

Beta Releases / Re: version 11.3 BETA (Last updated 16-Sep-21)

« on: September 22, 2021, 19:34:52 »

ADDED - Support for Changing Config/Log/Userdata path
ADDED - Support for redirecting some config files to locations.

Mathias, can I have a bit more info on these option, please?

I can't see any way to access them through the interface...

(Not finished yet)
http://multicommander.com/content/customized-paths

42

Support and Feedback / Re: File Search with Regex is case sensitive

« on: September 20, 2021, 18:28:39 »

When matching filename using the RegEx it is "ignore case" since Windows filesystem is that.

For matching file content you can toggle ignore case on/off

43

Beta Releases / Re: version 11.3 Bug ?

« on: September 20, 2021, 07:37:46 »

If the error was about path being to long it would say so.  The character limit is around 4096 but if it is over network it can be lower depended on system there.
Most error windows return a error code and that error is shown also the FileOperation log can have more info about errors (Ctrl+L)
But what error did you get ?  Without anymore information it is impossible to say why. It can lots of different reasons.

44

Support and Feedback / Re: Details directory info sometimes disappears?

« on: September 17, 2021, 16:27:25 »

Thanks.

Turns out everything except file name was scrolled off the screen to the right but it did not look like it at all and I don't know what caused it to be that way.  (see attached image)

I spent 3 minutes having to drag the tiny vertical line of each column separately to put it all back in a visible place.

next time, try double click in the area between the columns in the header. (where you drag them).. then it shrinks that column based on content.. however if one file is super long. Yhen it will fly away

45

Beta Releases / Re: version 11.3 BETA (Last updated 16-Sep-21)

« on: September 17, 2021, 15:04:15 »

ADDED - Support for Changing Config/Log/Userdata path
ADDED - Support for redirecting some config files to locations.

Mathias, can I have a bit more info on these option, please?

I can't see any way to access them through the interface...

There is no interface for them. and will not be, It will be a special file that allowes for path to be overwritten. (Mainly for IT Pros that want to control stuff for users. but also other reasons)
But info will come when they are better tested better finalized

46

Beta Releases / Re: version 11.3 BETA (Last updated 10-Sep-21)

« on: September 16, 2021, 08:35:54 »

Hi,

Build 2810 introduce problem with colour of the tabs, MC do not read my setting where I chose dark grey colour.
In this version tabs has blue colour I think default one.
There is still an issue with colour & type of the lines different than solid. By pressing down arrow the colour changes to white or default (red marking). Any other movement using arrow or mouse above panel restore the colour of the lines (green marking). I'll try to record the screen and send directly to you.

I will check the tab things

Line with dots/dashes not working thing, I cannot recreate that, it works for me. and there is not much I can do about that. might be depending on HW or something like that. I know a long time ago that drawing lines with special flags (here it is that the line should be drawn dottet and dashed), some gfx card / drivers has issues with that. I dont know if that is the reason here or not.
Can also be some other options you have that comes in conflict but I have not found any that might cause that.

47

Feature Requests and Suggestions / Re: Command line: allow . for current directory

« on: September 15, 2021, 07:23:51 »

Try latest beta. "." should work there but since the first path parameter is for the left panel it is opened there.

48

Support and Feedback / Re: Details directory info sometimes disappears?

« on: September 15, 2021, 07:21:04 »

I have never seen that.
Is the column removed from the header ? or is it out of view( so you have to scroll ) ?
You have not created a customized header layout what is without the date column that it is using ?

49

Support and Feedback / Re: Duplication of network files and folders.

« on: September 14, 2021, 14:23:47 »

I know that in some weird situation it can show duplicates sometimes.. it can happen when the filesystem is refresh at the same time it is redrawing it or something like that,  It is some weird situation like that. It is a timing issue. However I have not been able to recreate that.

Pressing refresh (F2/F5 depending on settings) should refresh it and correct it.

50

Beta Releases / Re: version 11.3 BETA (Last updated 10-Sep-21)

« on: September 10, 2021, 14:21:45 »

Thanks Mathias.
Yeah I figured the appcrash stuff was minimal use (hence FWIW) next time I'll just use the dump creation.
I have just been looking at windows logs & for dumps but you beat me to it

BTW The upload URL gives a

"Sorry, there was a problem uploading your file.

Storage is low on free disk space"

msg 

Issue fixed
Just run the MultiUpdate.exe tool and update to 2810