Recent Posts

1

Documentation / สล็อตพีจีเป็นแหล่งเกมทำเงินที่ดีเยี่ยมที่สุดในปีนี้ 2024 เป็นเว็บไซต์ที่แตกบ่อยครั้งได้ตลอดวัน เนื่อ

« Last post by PGSLOTAUTO on Today at 08:59:48 »

สวัสดีสาวกgame slot onlineทุกคนที่เข้ามาร่วมสนุกสนาน เว็บเดิมพันสล็อตออนไลน์ สล็อตพีจีแตกง่าย ของโลก ที่น่าลงทุน เป็นเว็บสล็อตที่ใหญ่ที่สุดในไทยที่สุดในโลก ผู้เล่นไม่สมควรลังเลเพราะเหตุว่าเราเป็นสล็อตที่เป็นเส้นทางที่นำพาทุกคนไปสู่การบรรลุเป้าหมาย มีค่ายเกมสล็อตพีจีแตกง่ายที่ได้รับความนิยมเยอะที่สุดในโลก เกมสล็อตค่ายใหญ่กมมากมายแบบอย่างที่จะให้ผู้เล่นได้หมุนแล้วก็เล่นได้โดยไม่เบื่อ พวกเราได้กลายเป็นสิ่งที่ทำให้เกิด pg slot เว็บใหม่ผู้เล่นสามารถมั่นใจได้ว่ามันจะเป็นค่ายเกมpgslot แตกง่าย ที่ได้รับอนุญาต 100% เป็น เว็บของแท้แตกหนัก พร้อมบริการสล็อตที่จะทำให้ผู้เล่นประทับใจอย่างแน่แท้

2

Support and Feedback / Re: "Show link target in name column" only affects symlinks to directories

« Last post by Mathias (Author) on Today at 07:20:44 »

That's really odd.

I tried it on 2 PCs, one with Windows 7, the other with Windows 10.
I tried it with the installer and the portable version.
I even tried earlier versions, back to the oldest available on the download page (v11.3).
The only changes in the configuration I made was unchecking "Show link target in name column".

The results were frustratingly consistent:
Toggling the option always made targets appear or disappear for symlinks to directories. But it had no effect on symlinks to files. For them the target was always displayed.

It's not as if the universe would implode, if that mystery couldn't be solved.
But it would be very convenient, if symlinks were a bit less obtrusive.

So, though I know that this question is slightly impertinent : Did it really really ever work as intended with file symlinks?

Correct.. for files it does not check that option.. Easy fix.. will be fixed in next version

3

Support and Feedback / Re: "Show link target in name column" only affects symlinks to directories

« Last post by Mathias (Author) on Yesterday at 21:43:02 »

That's really odd.

I tried it on 2 PCs, one with Windows 7, the other with Windows 10.
I tried it with the installer and the portable version.
I even tried earlier versions, back to the oldest available on the download page (v11.3).
The only changes in the configuration I made was unchecking "Show link target in name column".

The results were frustratingly consistent:
Toggling the option always made targets appear or disappear for symlinks to directories. But it had no effect on symlinks to files. For them the target was always displayed.

It's not as if the universe would implode, if that mystery couldn't be solved.
But it would be very convenient, if symlinks were a bit less obtrusive.

So, though I know that this question is slightly impertinent : Did it really really ever work as intended with file symlinks?

ah Files. Hmm I only have Folders here.. Will check tomorrow.

4

Support and Feedback / Re: "Show link target in name column" only affects symlinks to directories

« Last post by MCDowland on Yesterday at 21:23:58 »

That's really odd.

I tried it on 2 PCs, one with Windows 7, the other with Windows 10.
I tried it with the installer and the portable version.
I even tried earlier versions, back to the oldest available on the download page (v11.3).
The only changes in the configuration I made was unchecking "Show link target in name column".

The results were frustratingly consistent:
Toggling the option always made targets appear or disappear for symlinks to directories. But it had no effect on symlinks to files. For them the target was always displayed.

It's not as if the universe would implode, if that mystery couldn't be solved.
But it would be very convenient, if symlinks were a bit less obtrusive.

So, though I know that this question is slightly impertinent : Did it really really ever work as intended with file symlinks?

5

Support and Feedback / Re: "Show link target in name column" only affects symlinks to directories

« Last post by Mathias (Author) on Yesterday at 20:22:34 »

No if you uncheck that, symlinks should not show target path.. maybe the view is not refreshed ?

6

Support and Feedback / "Show link target in name column" only affects symlinks to directories

« Last post by MCDowland on Yesterday at 19:25:57 »

Hello!

For symlinks I would like the name column to contain only their name, but not the target that they point to.

The option "Show link target in name column" seems to be the right place to control this, but it affects only symlinks to directories. For them the link target disappears when the option is unchecked in the settings dialog.
For symlinks to files however, the link target is always displayed next to the name, no matter whether the option is checked or not.

Is that by design or am I doing something wrong?
I'm currently using the version 13.5.

Thanks.

7

Support and Feedback / Re: Can't Open .jpg files

« Last post by Mathias (Author) on Yesterday at 18:47:00 »

Is the jpg you try to open sync to local ?
maybe you did something from MC that trigger it to download and sync a file on onedrive., and then you aborted the sync and told it to block that app (MC) .? (Then you need to unblock it in Settings in onedrive)

Texts ? I don't know. Have not seen that. Are that for files on onedrive ?

8

Support and Feedback / Can't Open .jpg files

« Last post by ivanskcheung on Yesterday at 18:14:29 »

With MultiCommander v13.5 for windows 11, In a sub-folder in my microsoft Onedrive, I've been unable to open all .jpg files except two of them. I uninstalled and reinstalled Multicommander, but the problem still persists. I tried opening the same .jpg files in File Explorer and it worked fine. In addition to this, Multicommander has been unable to load the text in various toolbars properly without any obvious reason.                                                                                           

9

Support and Feedback / Re: Issue with drag and drop

« Last post by Mathias (Author) on May 22, 2024, 17:25:40 »

I can drag and drop a file from MC and drop into "file upload" place on a webpage  (Like drive.google.com)
If I hover over a tab in chrome. while dragging. the tab is switching.. 

MC have no control of any of that. Sounds like a browser issue.. If you search for drag and drop issue with chrome there are many results.

10

Support and Feedback / Issue with drag and drop

« Last post by dare023 on May 22, 2024, 14:29:03 »

I use Gdrive to upload the images and then share them with clients.
For some time now, when I drag the files from Multi Commander to Chrome, and the tab with the upload area is not active, I cannot change the tab just by hovering over it.
It did work properly before and works when using Filemanager.

Steps to reproduce:
1) Make sure you have multiple tabs in browser and Gdrive is not active
2) Drag files and hover over the tab to switch - nothing happens.

Any  advice would be appreciated, thank you.