Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Ulfhednar

Pages: [1] 2 3 4 5 ... 19
1
Beta Releases / Re: version 11.3 BETA (Last updated 10-Sep-21)
« on: September 10, 2021, 14:50:51 »
Thanks Mathias! 
A PC without MC is like eating broken glass!  ;D

2
Beta Releases / Re: version 11.3 BETA (Last updated 10-Sep-21)
« on: September 10, 2021, 14:13:22 »
Thanks Mathias.
Yeah I figured the appcrash stuff was minimal use (hence FWIW) next time I'll just use the dump creation.
I have just been looking at windows logs & for dumps but you beat me to it ;)

BTW The upload URL gives a
Quote
"Sorry, there was a problem uploading your file.

Storage is low on free disk space"
msg  :(

3
Beta Releases / Re: version 11.3 BETA (Last updated 10-Sep-21)
« on: September 10, 2021, 12:43:19 »
Just installed 2809
Cannot get past the startup flag @ reading config.  No idea if anything (eg error dialog) is behind it as it is 'fixed'.
Clicking on it makes it crash/close.

Really like the new copy / move dialog that appeared in the last release. Thanks Mathias   ;) 8)

FWIW Appcrashview gives me this data:-

Code: [Select]
´╗┐Version=1
EventType=AppHangB1
EventTime=132757472076039982
ReportType=3
Consent=1
UploadTime=132757472122232046
ReportStatus=97
ReportIdentifier=ef49423f-8ba7-486a-8c45-df45b8c12307
IntegratorReportIdentifier=077d47fd-d181-4bb4-9bab-aacdd03fdd55
Wow64Host=34404
NsAppName=MultiCommander.exe
OriginalFilename=MultiCommander.exe
AppSessionGuid=00001470-0001-0161-53da-79a337a6d701
TargetAppId=W:000062a2fa18afa015773728ce58b21093580000ffff!000023ab6dcefbd6cb178c4737c1e7fe252734fefb8f!MultiCommander.exe
TargetAppVer=2021//09//10:10:03:35!0!MultiCommander.exe
BootId=4294967295
TargetAsId=1340
UserImpactVector=269484304
IsFatal=1
EtwNonCollectReason=1
Response.type=4
Sig[0].Name=Application Name
Sig[0].Value=MultiCommander.exe
Sig[1].Name=Application Version
Sig[1].Value=11.3.0.2809
Sig[2].Name=Application Timestamp
Sig[2].Value=613b2d77
Sig[3].Name=Hang Signature
Sig[3].Value=9d8b
Sig[4].Name=Hang Type
Sig[4].Value=134217728
DynamicSig[1].Name=OS Version
DynamicSig[1].Value=10.0.19041.2.0.0.256.48
DynamicSig[2].Name=Locale ID
DynamicSig[2].Value=2057
DynamicSig[22].Name=Additional Hang Signature 1
DynamicSig[22].Value=9d8b9ffd33d6dda0da85aa18a57c4970
DynamicSig[23].Name=Additional Hang Signature 2
DynamicSig[23].Value=0ca7
DynamicSig[24].Name=Additional Hang Signature 3
DynamicSig[24].Value=0ca7a69a953559d9a15d5c8b3b3286a6
DynamicSig[25].Name=Additional Hang Signature 4
DynamicSig[25].Value=9d8b
DynamicSig[26].Name=Additional Hang Signature 5
DynamicSig[26].Value=9d8b9ffd33d6dda0da85aa18a57c4970
DynamicSig[27].Name=Additional Hang Signature 6
DynamicSig[27].Value=0ca7
DynamicSig[28].Name=Additional Hang Signature 7
DynamicSig[28].Value=0ca7a69a953559d9a15d5c8b3b3286a6
UI[3]=Multi Commander - File Management For Professionals is not responding
UI[4]=If you close the program, you might lose information.
UI[5]=Close the program
UI[6]=Close the program
UI[7]=Close the program
LoadedModule[0]=C:\Program Files\MultiCommander (x64)\MultiCommander.exe
LoadedModule[1]=C:\WINDOWS\SYSTEM32\ntdll.dll
LoadedModule[2]=C:\WINDOWS\System32\KERNEL32.DLL
LoadedModule[3]=C:\WINDOWS\System32\KERNELBASE.dll
LoadedModule[4]=C:\WINDOWS\System32\SHLWAPI.dll
LoadedModule[5]=C:\WINDOWS\System32\msvcrt.dll
LoadedModule[6]=C:\WINDOWS\System32\SETUPAPI.dll
LoadedModule[7]=C:\WINDOWS\System32\cfgmgr32.dll
LoadedModule[8]=C:\WINDOWS\System32\ucrtbase.dll
LoadedModule[9]=C:\WINDOWS\System32\RPCRT4.dll
LoadedModule[10]=C:\WINDOWS\System32\bcrypt.dll
LoadedModule[11]=C:\WINDOWS\System32\USER32.dll
LoadedModule[12]=C:\WINDOWS\System32\win32u.dll
LoadedModule[13]=C:\WINDOWS\System32\GDI32.dll
LoadedModule[14]=C:\WINDOWS\System32\gdi32full.dll
LoadedModule[15]=C:\WINDOWS\System32\msvcp_win.dll
LoadedModule[16]=C:\WINDOWS\System32\COMDLG32.dll
LoadedModule[17]=C:\WINDOWS\SYSTEM32\VERSION.dll
LoadedModule[18]=C:\WINDOWS\System32\combase.dll
LoadedModule[19]=C:\WINDOWS\System32\shcore.dll
LoadedModule[20]=C:\WINDOWS\SYSTEM32\MSIMG32.dll
LoadedModule[21]=C:\WINDOWS\System32\SHELL32.dll
LoadedModule[22]=C:\WINDOWS\System32\ADVAPI32.dll
LoadedModule[23]=C:\WINDOWS\System32\sechost.dll
LoadedModule[24]=C:\WINDOWS\WinSxS\amd64_microsoft.windows.common-controls_6595b64144ccf1df_6.0.19041.844_none_ca00b6081b84eb1d\COMCTL32.dll
LoadedModule[25]=C:\WINDOWS\System32\ole32.dll
LoadedModule[26]=C:\WINDOWS\SYSTEM32\WINSPOOL.DRV
LoadedModule[27]=C:\WINDOWS\System32\OLEAUT32.dll
LoadedModule[28]=C:\WINDOWS\System32\WS2_32.dll
LoadedModule[29]=C:\WINDOWS\System32\PSAPI.DLL
LoadedModule[30]=C:\WINDOWS\SYSTEM32\UxTheme.dll
LoadedModule[31]=C:\WINDOWS\SYSTEM32\oledlg.dll
LoadedModule[32]=C:\WINDOWS\SYSTEM32\USERENV.dll
LoadedModule[33]=C:\WINDOWS\SYSTEM32\dbghelp.dll
LoadedModule[34]=C:\WINDOWS\SYSTEM32\WININET.dll
LoadedModule[35]=C:\WINDOWS\SYSTEM32\WTSAPI32.dll
LoadedModule[36]=C:\WINDOWS\SYSTEM32\NETAPI32.dll
LoadedModule[37]=C:\WINDOWS\SYSTEM32\WINMM.dll
LoadedModule[38]=C:\WINDOWS\SYSTEM32\MPR.dll
LoadedModule[39]=C:\WINDOWS\WinSxS\amd64_microsoft.windows.gdiplus_6595b64144ccf1df_1.1.19041.928_none_faefac437613c6cc\gdiplus.dll
LoadedModule[40]=C:\WINDOWS\SYSTEM32\OLEACC.dll
LoadedModule[41]=C:\WINDOWS\SYSTEM32\dbgcore.DLL
LoadedModule[42]=C:\WINDOWS\SYSTEM32\SRVCLI.DLL
LoadedModule[43]=C:\WINDOWS\SYSTEM32\NETUTILS.DLL
LoadedModule[44]=C:\WINDOWS\System32\IMM32.DLL
LoadedModule[45]=C:\Windows\system32\guard64.dll
LoadedModule[46]=C:\WINDOWS\system32\fltlib.dll
LoadedModule[47]=C:\WINDOWS\SYSTEM32\windows.storage.dll
LoadedModule[48]=C:\WINDOWS\SYSTEM32\Wldp.dll
LoadedModule[49]=C:\WINDOWS\SYSTEM32\kernel.appcore.dll
LoadedModule[50]=C:\WINDOWS\System32\bcryptPrimitives.dll
LoadedModule[51]=C:\WINDOWS\System32\MSCTF.dll
LoadedModule[52]=C:\WINDOWS\SYSTEM32\iphlpapi.dll
LoadedModule[53]=C:\WINDOWS\System32\NSI.dll
LoadedModule[54]=C:\WINDOWS\SYSTEM32\dhcpcsvc.DLL
LoadedModule[55]=C:\WINDOWS\SYSTEM32\SspiCli.dll
LoadedModule[56]=C:\WINDOWS\SYSTEM32\TextShaping.dll
LoadedModule[57]=C:\WINDOWS\SYSTEM32\textinputframework.dll
LoadedModule[58]=C:\WINDOWS\System32\CoreUIComponents.dll
LoadedModule[59]=C:\WINDOWS\System32\CoreMessaging.dll
LoadedModule[60]=C:\WINDOWS\SYSTEM32\ntmarta.dll
LoadedModule[61]=C:\WINDOWS\SYSTEM32\wintypes.dll
LoadedModule[62]=C:\WINDOWS\System32\clbcatq.dll
LoadedModule[63]=C:\WINDOWS\system32\dataexchange.dll
LoadedModule[64]=C:\WINDOWS\system32\d3d11.dll
LoadedModule[65]=C:\WINDOWS\system32\dcomp.dll
LoadedModule[66]=C:\WINDOWS\system32\dxgi.dll
LoadedModule[67]=C:\WINDOWS\system32\twinapi.appcore.dll
LoadedModule[68]=C:\Program Files\Common Files\microsoft shared\ink\tiptsf.dll
LoadedModule[69]=C:\WINDOWS\SYSTEM32\CRYPTBASE.DLL
LoadedModule[70]=C:\WINDOWS\SYSTEM32\WindowsCodecs.dll
LoadedModule[71]=C:\WINDOWS\SYSTEM32\mscms.dll
LoadedModule[72]=C:\WINDOWS\SYSTEM32\ColorAdapterClient.dll
LoadedModule[73]=C:\WINDOWS\SYSTEM32\WINSTA.dll
LoadedModule[74]=C:\WINDOWS\SYSTEM32\PROPSYS.dll
LoadedModule[75]=C:\WINDOWS\SYSTEM32\profapi.dll
LoadedModule[76]=C:\Windows\System32\thumbcache.dll
LoadedModule[77]=C:\WINDOWS\SYSTEM32\apphelp.dll
LoadedModule[78]=C:\Windows\System32\dlnashext.dll
LoadedModule[79]=C:\WINDOWS\system32\wpdshext.dll
OsInfo[0].Key=vermaj
OsInfo[0].Value=10
OsInfo[1].Key=vermin
OsInfo[1].Value=0
OsInfo[2].Key=verbld
OsInfo[2].Value=19041
OsInfo[3].Key=ubr
OsInfo[3].Value=985
OsInfo[4].Key=versp
OsInfo[4].Value=0
OsInfo[5].Key=arch
OsInfo[5].Value=9
OsInfo[6].Key=lcid
OsInfo[6].Value=1033
OsInfo[7].Key=geoid
OsInfo[7].Value=242
OsInfo[8].Key=sku
OsInfo[8].Value=48
OsInfo[9].Key=domain
OsInfo[9].Value=0
OsInfo[10].Key=prodsuite
OsInfo[10].Value=256
OsInfo[11].Key=ntprodtype
OsInfo[11].Value=1
OsInfo[12].Key=platid
OsInfo[12].Value=10
OsInfo[13].Key=sr
OsInfo[13].Value=0
OsInfo[14].Key=tmsi
OsInfo[14].Value=221259749
OsInfo[15].Key=osinsty
OsInfo[15].Value=3
OsInfo[16].Key=iever
OsInfo[16].Value=11.789.19041.0-11.0.1000
OsInfo[17].Key=portos
OsInfo[17].Value=0
OsInfo[18].Key=ram
OsInfo[18].Value=16334
OsInfo[19].Key=svolsz
OsInfo[19].Value=237
OsInfo[20].Key=wimbt
OsInfo[20].Value=0
OsInfo[21].Key=blddt
OsInfo[21].Value=191206
OsInfo[22].Key=bldtm
OsInfo[22].Value=1406
OsInfo[23].Key=bldbrch
OsInfo[23].Value=vb_release
OsInfo[24].Key=bldchk
OsInfo[24].Value=0
OsInfo[25].Key=wpvermaj
OsInfo[25].Value=0
OsInfo[26].Key=wpvermin
OsInfo[26].Value=0
OsInfo[27].Key=wpbuildmaj
OsInfo[27].Value=0
OsInfo[28].Key=wpbuildmin
OsInfo[28].Value=0
OsInfo[29].Key=osver
OsInfo[29].Value=10.0.19041.985.amd64fre.vb_release.191206-1406
OsInfo[30].Key=buildflightid
OsInfo[30].Value=64B36024-B63D-4CD5-8CFA-3B295DB8B77B.1
OsInfo[31].Key=edition
OsInfo[31].Value=Professional
OsInfo[32].Key=ring
OsInfo[32].Value=Retail
OsInfo[33].Key=expid
OsInfo[33].Value=RS:847B
OsInfo[34].Key=fconid
OsInfo[35].Key=containerid
OsInfo[36].Key=containertype
OsInfo[37].Key=edu
OsInfo[37].Value=0
FriendlyEventName=Stopped responding and was closed
ConsentKey=AppHangXProcB1
AppName=Multi Commander - File Management For Professionals
AppPath=C:\Program Files\MultiCommander (x64)\MultiCommander.exe
ReportDescription=A problem caused this program to stop interacting with Windows.
NsPartner=windows
NsGroup=windows8
ApplicationIdentity=90F8AD5027199C64C3863DD150F1FB13
MetadataHash=834502349

4
Thanks Mathias.
I never get a msg box, so nothing I can click. Just the splash flag which is static.

But I must have had an instance active when I edited the xml.  Made sure MC was all closed & it saved it correctly this time ::) :-[
No idea why I allowed that as it is obvious.  Too long in lock-down maybe!   :D


5
Hi Mathias.
I deleted all lines below <\config> & added the <startup> tags below </save>as you showed in your post.
So that section I used as example is :-
Code: [Select]
  </tweak>
    <SortLanguageAware value="0"/>
    <SortFilesBeforeFolders value="0"/>
    <AdjustDateTimeForDTS value="1"/>
    <HighlightSortColumn value="0"/>
  </layout>
  <tweak>
    <CacheRowData value="0"/>
  </tweak>
  <save>
    <path value="1"/>
    <onlylocal value="1"/>
    <sort value="1"/>
    <onlylocked value="0"/>
    <itemfocus value="1"/>
  </save>   
 <startup>
  </startup>   
  <selection>
    <comparefolders>
      <files value="1"/>
      <folders value="1"/>
    </comparefolders>

Closing & restarting MC appends the lines from the <save> section =
Code: [Select]
</config>
<DelayUpdate value="1"/>
<onlylocal value="0"/>
<onlylocked value="0"/>
<itemfocus value="1"/>
<sort value="1"/>
& MC hangs.  <startup> is removed from the xml.
MC isn't even listed in the alt+tab window.  The splash screen appears on the desktop & that's it.
MC must be accessed & killed via TM.


I ran windbg on the dump to see if that would help.
Here's the output:

Code: [Select]
*******************************************************************************
*                                                                             *
*                        Exception Analysis                                   *
*                                                                             *
*******************************************************************************

*** WARNING: Unable to verify checksum for MultiCommander.exe

KEY_VALUES_STRING: 1

    Key  : Analysis.CPU.Sec
    Value: 1

    Key  : Analysis.DebugAnalysisProvider.CPP
    Value: Create: 8007007e on DESKTOP-LDE1BEV

    Key  : Analysis.DebugData
    Value: CreateObject

    Key  : Analysis.DebugModel
    Value: CreateObject

    Key  : Analysis.Elapsed.Sec
    Value: 28

    Key  : Analysis.Memory.CommitPeak.Mb
    Value: 71

    Key  : Analysis.System
    Value: CreateObject

    Key  : Timeline.OS.Boot.DeltaSec
    Value: 5827

    Key  : Timeline.Process.Start.DeltaSec
    Value: 178


NTGLOBALFLAG:  0

PROCESS_BAM_CURRENT_THROTTLED: 0

PROCESS_BAM_PREVIOUS_THROTTLED: 0

APPLICATION_VERIFIER_FLAGS:  0

EXCEPTION_RECORD:  (.exr -1)
ExceptionAddress: 0000000000000000
   ExceptionCode: 80000003 (Break instruction exception)
  ExceptionFlags: 00000000
NumberParameters: 0

FAULTING_THREAD:  00003ebc

PROCESS_NAME:  MultiCommander.exe

ERROR_CODE: (NTSTATUS) 0x80000003 - {EXCEPTION}  Breakpoint  A breakpoint has been reached.

EXCEPTION_CODE_STR:  80000003

STACK_TEXT: 
000000ae`1e76adb8 00007fff`c951d6f1 : 00000000`00000000 00000000`000000e5 00000000`0003088c 00007fff`c94f0000 : win32u!NtUserWaitMessage+0x14
000000ae`1e76adc0 00007fff`c951d461 : 00000000`00000100 00000000`00000000 00000000`00000001 00000000`00000000 : user32!DialogBox2+0x261
000000ae`1e76ae60 00007fff`c956bc1b : 00000000`00010009 000000ae`1e76afc0 000000ae`1e76b1e0 00000288`571b1120 : user32!InternalDialogBox+0x12d
000000ae`1e76aec0 00007fff`c956a535 : 00000000`00000000 00000000`000000a9 00000000`000002f0 00000000`00000032 : user32!SoftModalMessageBox+0x85b
000000ae`1e76b010 00007fff`c956b327 : 00007fff`c94feb96 00000000`00000012 00000000`0000000e 00000000`00000800 : user32!MessageBoxWorker+0x341
000000ae`1e76b1c0 00007fff`c956b3ae : 00000000`00000000 00000000`00000376 00000000`00000000 00000288`571d9f68 : user32!MessageBoxTimeoutW+0x1a7
000000ae`1e76b2c0 00007ff7`dba64a93 : 00000000`00000000 00007ff7`dc170310 00007ff7`0000007d 00000000`00000030 : user32!MessageBoxW+0x4e
000000ae`1e76b300 00007ff7`dba647c2 : 00000288`571d8e00 00007ff7`db9e5724 00000288`571dbbf0 00000288`55bf4200 : MultiCommander+0x84a93
000000ae`1e76b590 00007ff7`dbde6e06 : 00000288`571d9f68 00000000`00000000 00000288`571dbbf0 00000000`00000001 : MultiCommander+0x847c2
000000ae`1e76b5d0 00007ff7`dbde2077 : 00000288`571d8e00 00000288`571d9f68 00000288`55bf4298 00000288`55bf4201 : MultiCommander+0x406e06
000000ae`1e76b610 00007ff7`dbde277b : 000000ae`1e76b718 000000ae`1e76b701 00000288`55bf4298 00000288`55bf4298 : MultiCommander+0x402077
000000ae`1e76b660 00007ff7`dbde9fe6 : 00000000`00000000 000000ae`1e76b740 00000288`571d6f00 00000000`00002710 : MultiCommander+0x40277b
000000ae`1e76b6d0 00007ff7`dbf87374 : 00000288`571d6f00 00007ff7`db9e6501 000000ae`1e76b870 ffffc148`3d83c610 : MultiCommander+0x409fe6
000000ae`1e76b760 00007ff7`dbf1dce3 : 00000288`571d6fc0 000000ae`1e76b800 000000ae`1e76b870 00000288`572807a0 : MultiCommander+0x5a7374
000000ae`1e76b7a0 00007ff7`dbf2ebb5 : 00000288`00000000 00000288`5719e510 00000288`571d6fb0 00000288`571d6fa0 : MultiCommander+0x53dce3
000000ae`1e76b810 00007ff7`dbf304c7 : 00000288`55bf4400 00000288`5719e510 00000288`571d6fb0 00000288`571d6fc8 : MultiCommander+0x54ebb5
000000ae`1e76b870 00007ff7`dbdf5de1 : 00000288`57168c90 00000288`571d6ff8 00000288`571dbd90 00000000`00000052 : MultiCommander+0x5504c7
000000ae`1e76f9c0 00007ff7`dbdfa864 : 00000288`55bf4380 000000ae`1e76fab0 00000288`571d6fa0 00000288`56fc6af0 : MultiCommander+0x415de1
000000ae`1e76fa00 00007ff7`dbc1f5ff : 00000288`571d63b8 000000ae`1e76fab0 00000288`56fc6af0 00007ff7`dc028a01 : MultiCommander+0x41a864
000000ae`1e76fa40 00007ff7`dbc23a35 : 00000288`570b9c48 00000000`00000001 00000000`00000000 00000288`55bf4290 : MultiCommander+0x23f5ff
000000ae`1e76fad0 00007ff7`dbccea49 : 00000288`55c29af0 00000288`55c655b0 00007ff7`dc170310 00000288`55bf0850 : MultiCommander+0x243a35
000000ae`1e76fb70 00007ff7`dbcda419 : 00000000`03e30123 00007ff7`dba6111c 00007ff7`dc170310 00000288`55cc85c8 : MultiCommander+0x2eea49
000000ae`1e76fba0 00007ff7`dbb30fe3 : 00000288`00000000 00000000`00000001 00000000`00000000 00000288`53b324e0 : MultiCommander+0x2fa419
000000ae`1e76fc90 00007ff7`dbaa6f6e : 00000000`00000001 00000000`00000000 00000000`00000000 00000000`00000000 : MultiCommander+0x150fe3
000000ae`1e76fcd0 00007fff`c8107034 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : MultiCommander+0xc6f6e
000000ae`1e76fd10 00007fff`c9efd0d1 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : kernel32!BaseThreadInitThunk+0x14
000000ae`1e76fd40 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : ntdll!RtlUserThreadStart+0x21


STACK_COMMAND:  ~0s; .ecxr ; kb

SYMBOL_NAME:  win32u!NtUserWaitMessage+14

MODULE_NAME: win32u

IMAGE_NAME:  win32u.dll

FAILURE_BUCKET_ID:  BREAKPOINT_80000003_win32u.dll!NtUserWaitMessage

OS_VERSION:  10.0.19041.1

BUILDLAB_STR:  vb_release

OSPLATFORM_TYPE:  x64

OSNAME:  Windows 10

FAILURE_ID_HASH:  {a106cd41-a8b1-c51d-6d94-a75661270841}

6
Hi Mathias.
I can see the values that are added at the end of the xml in what I assume is the correct place:-
Code: [Select]
  </tweak>
    <SortLanguageAware value="0"/>
    <SortFilesBeforeFolders value="0"/>
    <AdjustDateTimeForDTS value="1"/>
    <HighlightSortColumn value="0"/>
  </layout>
  <tweak>
    <CacheRowData value="0"/>
  </tweak>
  <save>
    <path value="1"/>
    <onlylocal value="1"/>
    <sort value="1"/>
    <onlylocked value="0"/>
    <itemfocus value="1"/>
  </save>       
  <selection>
    <comparefolders>
      <files value="1"/>
      <folders value="1"/>
    </comparefolders>

these are echoed at the end on MC shut down as I said.
I added the
 <startup>
  </startup>
beneath   </save>
& MC removed the starup entries & echoed those lines again & is back hanging on the 'loading' comment.

Tried uploading a dmp  & 
Quote
Sorry, there was a problem uploading your file.

Storage is low on free disk space

......I'll try again later  ;)

7
Updated & ran this build OK for 5hrs approx.
Subsequently shut down & restarted PC & now hangs on splash screen at ''Loading extension : Explorer Panel'' statement.
Needs to be terminated via Task Manager.  Running as Admin on win10 x64.

Following Lukasz' comment, I altered the end section of the ExplorerPanel.xml file & MC then correctly starts.
I.E.
Code: [Select]
<DelayUpdate value="1"/>
<onlylocal value="0"/>
<onlylocked value="0"/>
<itemfocus value="1"/>
<sort value="1"/>

<<<< I commented out this trailing extra block>>>>

<!--<DelayUpdate value="1"/>-->
<!--<onlylocal value="0"/>-->
<!--<onlylocked value="0"/>-->
<!--<itemfocus value="1"/>-->
<!--<sort value="1"/>-->

Closing MC reverts to lock-up at next start with ExplorerPanel.xml being incorrectly formatted again.

Need your help Mathias ;)

8
Support and Feedback / Re: File Coloring Rules Editor dialog
« on: March 13, 2021, 17:57:00 »
Thanks Mathias.
Well that shows how long I've been happy with my colors  ;D
Only on the last update did my system files suddenly become invisible in dark mode.
The absence of the system files setting threw me but I can see that there are lots of options with the new filter setup, which is good.  ;)
I will have to think about how I can use the increased functions.  :)

9
Support and Feedback / File Coloring Rules Editor dialog
« on: March 09, 2021, 15:27:24 »
Has the default dialog changed, Mathias?
I added a filter so it does what i want.  But I'm wondering whether the dialog has changed.
It was

but I now get a different version with fewer presets.

I wanted to change the 'System' file colors but that entry doesn't appear to be present in MC v11 b2770 x64 (run as admin, dark mode) editor dialog...  ???


10
Thanks Mathias, not to worry.
I had wondered if it was an obvious or known limitation of the search panel.
I will try & do some experiments & see if I can track it down & get back to you.  :)

11
Thanks for the reply Mathias.

I haven't tried many scripts via the RES, but the one that would like most, name as folder (from the thread I mentioned above), doesn't work on single or multiple selected files.
Using less complex instructions does work in some cases e.g. search & replace chars in a found item, works fine.

I'm guessing the call to get the folder name doesn't interpret the virtual path of the RES correctly.  :-\
Maybe I just need to alter how the folder name variable is looked for by MS?

12
I'd like to be able to select files in the RES window & run my scripts on them.

EG Would like to block select & run 'name as folder' script on found files in multiple folders via the RES.
(Re:- http://forum.multicommander.com/forum/index.php/topic,945.msg2836.html#msg2836 )

I think this may be a complex thing to incorporate given the variables but maybe it's possible???   ??? ;)

13
Support and Feedback / Re: Log file output issue
« on: December 09, 2020, 18:50:22 »
Thanks Mathias.
Yes I am just using the copy option now ;)

14
Support and Feedback / Log file output issue
« on: December 08, 2020, 23:16:04 »
In Win10 with MC 10.1 b2743 x64
Using Log window (file operations tab) I found that using select all > copy to file  for log contents creates an empty 0 byte txt file.   :-\

The contents when just copied are fine & paste into a txt as normal.

One for the bug list?

15
Beta Releases / Re: v10.0 Beta 2728
« on: September 22, 2020, 17:38:08 »
Thanks for the improvements Mathias.  Liking it so far ;)

I am wondering if there is some way to alter the hidden files & folders coloring in Dark mode when they are shown?
Currently things like pagefile.sys & $WINDOWS.~BT are black when unselected & I'd like to hi-lite the label text but cannot see how  :-\
....& whilst I'm being awkward, I'd also like to put a white border on the "KB" of the Calculate Folder Sizes Icon on the top bar...  :)

16
Beta Releases / Re: v10.0 b2725
« on: September 21, 2020, 14:09:39 »
Thanks Mathias 2726 fixes it. :)

The GUI looks good with this makeover. Will you be able to make this quick-launch toolbar Dark also? 

FYI - I noticed that when making the filelist fields Dark the scroll bars stay Dark if/when reverting to original colors until MC is restarted.
The quick launchbar is dark..
ANd yes some UI elements cant be changed untils MC is restarted. After you enabled it there will be a dialog notifying about a restart is required if all UI element should change

Ah, I'm not seeing any restart req'd dialog anywhere so I'm only doing half the job   ::) :-[
Now I just need a way to make all file coloring rules 'neon' automatically  ;D


BTW FTP is working OK for me.
Thanks Mathias.


Update
FYI I noticed the filter dialog (attached) has a problem.

17
Beta Releases / Re: v10.0 b2725
« on: September 20, 2020, 15:13:06 »
Is there a changelog for this beta? I only saw it when updating but can't find it elsewhere.

This was written by the update to b2726

Code: [Select]
Release v10.0 BETA (Build 2726) ( 19-Sep-2020 )

-- 2726 (Beta)
   FIXED - EntireRow QuickLaunch bar now works again
   ADDED - MultiScript SaveStringToFile can now append to file

-- 2725 (Beta)
   ADDED - Enable/Disable Dark Theme settings that also can change some customized colors if wanted
   ADDED - New Toolbar that support dark mode and resizing better (and other improvments in the toolbar)
   FIXED - DeviceCombo is now updated correctly when devices are added/removed
   FIXED - Lots of minor fixes and changes to support dark theme
   FIXED - ComboBox Popup fixes with High DPI mode
   FIXED - High DPI Issues with Checkboxes
   ADDED - ComboBox now support dynamic width with the popup
   ADDED - Makesure Alt+Arrow Down and Alt+Up withs in Combobox to show/close popup
   FIXED - Sometimes device combo was not updated.
   ADDED - DarkMode support on Windows 10 in MOST places.. MC have over 100 dialog so only the most common are changed
           Using Undocumented Windows 10 API. so might stop work on new version of Windows.
           See Forum for more info  http://forum.multicommander.com/forum/index.php/board,8.0.html
   ADDED - FindFiles option to do content search in binary files.
   ADDED - FindFiles will no longer by default search binary files when doing content search.
   ADDED - Custom ComboBox (Dropdown) controller that support darkmode
   ADDED - Command field command to set position and size of MC.  ":setpos x y""

18
Beta Releases / Re: v10.0 b2725
« on: September 20, 2020, 15:08:50 »
Thanks Mathias 2726 fixes it. :)

The GUI looks good with this makeover. Will you be able to make this quick-launch toolbar Dark also? 

FYI - I noticed that when making the filelist fields Dark the scroll bars stay Dark if/when reverting to original colors until MC is restarted.

19
Beta Releases / Re: v10.0 b2725
« on: September 19, 2020, 13:16:07 »
Yes I notice that the Entire Row QuickLaunch bar was not created.. It will be fixed in a new release today

Thanks a lot Mathias   :) 8)

20
Beta Releases / v10.0 b2725
« on: September 18, 2020, 15:17:20 »
Just updated to this & lost my custom toolbar space.  (I'd added stuff below the drives/Docs etc toolbar).
Any way to recover that extra space? 
Can't seem to see how to do it.  ...or am I half asleep & have forgotten how to do it?  :D
I tried reloading my saved layout config without effect.
I can add back the custom commands but this tool area won't move from the end of the input cmd/path field.  :-\


21
Support and Feedback / Re: Regex backreference in MultiRename?
« on: July 24, 2020, 13:06:53 »
Thanks Mathias.

I'll see what I can do with scripting  :D

OT
In the new Find Pane (RES #) are you planning to make scripted buttons accessible for the found items?
I was thinking that it would be nice to be able to rename items via script from the RES pane, eg Name as Folder for items found in sub-folders etc.

22
Support and Feedback / Regex backreference in MultiRename?
« on: July 23, 2020, 16:59:14 »
I'm wondering if I should be able to use a backreference in MR?

eg to change S27 to Session 27
Code: [Select]
(S\d+)|" - Session "\1
I've tried \1 in a variety of places vs the "" & it won't call it, only giving bad chars warning in the rename preview pane.  :-\

The ECMA REGEX script syntax linked to elsewhere says

\int   |backreference   |the result of the submatch whose opening parenthesis is the int-th (int shall begin by a digit other than 0).
(subpattern)   |Group   |Creates a backreference.
(?:subpattern)   |Passive group   |Does not create a backreference.



23
Support and Feedback / Re: file search using timestamp
« on: April 15, 2020, 13:59:40 »
Great :)
Thanks for your efforts.  ;) 8)

24
Support and Feedback / Re: file search using timestamp
« on: April 14, 2020, 12:33:19 »
OK, thanks Mathias  ;)

25
Support and Feedback / file search using timestamp
« on: April 11, 2020, 16:23:48 »
MC 9.6.1 b2582 x64 Win10

I'm puzzled by the result I got today using search>advanced>time.
I specified *.* on anything written since 1500, I got 0 hits.
I then tried 1400 & the files appeared.
The timestamps of the files was 1502+ so I don't understand why it needed any adjustment below 1500 to find them.  (1450-59 didn't work either).

I was sure that the sensitivity used to be seconds - or am I doing it wrong?  :-\

Pages: [1] 2 3 4 5 ... 19