3326
Beta Releases / Re: Bugs (or misbehaviour) in 3.1.0 b1400
« on: April 26, 2013, 07:48:14 »
Yes you are right, I was looking in the wrong place. It is too early in the day.. 
News:
January 2024
MultiCommander v13.5 is released!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
3327
Beta Releases / Re: Bugs (or misbehaviour) in 3.1.0 b1400
« on: April 26, 2013, 07:27:19 »I was quite inattentive
no but u,47
3328
Beta Releases / Re: Bugs (or misbehaviour) in 3.1.0 b1400
« on: April 26, 2013, 07:02:45 »
1. Ohh I forgot about this
2. Well It works the same, but because of (1) you did not see it.
3. I know and will not be fixed. It has to do with that focus is not restored until you click something.
4. NO there is no /PREV /NEXT param. but you can set the paramter Tab="..." to PREV/NEXT TAB="PREV" , TAB="NEXT"
2. Well It works the same, but because of (1) you did not see it.
3. I know and will not be fixed. It has to do with that focus is not restored until you click something.
4. NO there is no /PREV /NEXT param. but you can set the paramter Tab="..." to PREV/NEXT TAB="PREV" , TAB="NEXT"
3329
Support and Feedback / Re: Search multiple drives?
« on: April 24, 2013, 12:53:53 »
No worries.
Kind of my fault, since the documentation is kind of incomplete.
If I had more time I would improve the documentation since it is missing a lot. But writing documentation takes more time then one might think.
( I have now updated the online documentation with a quick note about this )
Kind of my fault, since the documentation is kind of incomplete.
If I had more time I would improve the documentation since it is missing a lot. But writing documentation takes more time then one might think.
( I have now updated the online documentation with a quick note about this )
3330
Support and Feedback / Re: Search multiple drives?
« on: April 23, 2013, 18:50:49 »
Separator is ";"
Eg "D:\;E:\;F:\Stuff;G:\Folder42"
Eg "D:\;E:\;F:\Stuff;G:\Folder42"
3331
Support and Feedback / Re: wrong file size
« on: April 23, 2013, 10:05:14 »
However.. It could be that the thousand separator in your regional settings are bad or something.
What character do you have for that in regional settings in windows ?
What character do you have for that in regional settings in windows ?
3332
Support and Feedback / Re: wrong file size
« on: April 23, 2013, 09:54:33 »
That strange,
Because if the tooltip shows 1 Byte as filesize. Then it is the size that Windows gave to MC when it asked about the filesize
Because if the tooltip shows 1 Byte as filesize. Then it is the size that Windows gave to MC when it asked about the filesize
3333
Support and Feedback / Re: wrong file size
« on: April 23, 2013, 09:08:18 »
Sounds very strange.
How size does the tooltip show ? (makesure tooltip is set to always be shown, then hover over an item for 1-2sec)
How size does the tooltip show ? (makesure tooltip is set to always be shown, then hover over an item for 1-2sec)
3334
Support and Feedback / Re: Crash on Find Files with wrong input
« on: April 23, 2013, 07:39:25 »
Thanks.
I will take a look at that.
I will take a look at that.
3335
Support and Feedback / Re: response time when changing focused file/folder
« on: April 16, 2013, 16:52:14 »
Ahh okey that was an impotent clue
No that time can not be tweaked at this time. But that will be possible in the future.
No that time can not be tweaked at this time. But that will be possible in the future.
3336
Support and Feedback / Re: response time when changing focused file/folder
« on: April 16, 2013, 15:10:46 »
The focus should change instantly when you click on the item you what to set to focus. Don't understand how that can be slow
3337
Beta Releases / Multi Commander v3.1 RC Build 1397
« on: April 14, 2013, 12:26:32 »
Multi Commmander v3.1 (Build 1397) BETA - 155+ Changes
Changes since build 1385
ADDED - Able to hide delete options dialog when deleting to recyle bin. (Use at own risk)
ADDED - Command to show/hide hidden files. (No default hotkey set yet)
ADDED - Rule based coloring support "Contains", "BeginWith" , "EndsWith, and "Has" for attributes
ADDED - Row configuration for the button panel in Core Settings.
ADDED - Alternative commands for the button panel can be disabled.
ADDED - Custom Command "SetActiveTab" now support "Next" and "Prev" as tab parameter.
ADDED - Rename multiple item using move to same path.(shift+F6) is now using target name filter.
ADDED - FileOperations settings that was access from CopyTo dialog is not also available from configuration menu
ADDED - Change file properties dialog (Attributes and FileTime) can now also change Created and LastAccess time.
ADDED - Custom Command "MC.Explorer.SizeFolder" no support the parameter "ONLYFOCUS" that will only size folder that are in focus
FIXED - 1 Crash problem reported by Crash report system.
Changes since build 1390
CHANGE- Changed how checking for new version works.
FIXED - QuickLaunchBar handled relatives paths better.
ADDED - QuickLaunchBar can create relative paths better
ADDED - QuickLaunchBar can now be configured on how to handle dropped files.
ADDED - Show hidden files command and Search command now available in menu and toolbar
FIXED - Lots of internal fixes and improvements.
Changes in previous beta
How to update to beta version
(Reply to this post if you have any issues or questions about the changes that are listed new for the beta here. For other issue use the normal Support forum board.)
Changes since build 1385
ADDED - Able to hide delete options dialog when deleting to recyle bin. (Use at own risk)
ADDED - Command to show/hide hidden files. (No default hotkey set yet)
ADDED - Rule based coloring support "Contains", "BeginWith" , "EndsWith, and "Has" for attributes
ADDED - Row configuration for the button panel in Core Settings.
ADDED - Alternative commands for the button panel can be disabled.
ADDED - Custom Command "SetActiveTab" now support "Next" and "Prev" as tab parameter.
ADDED - Rename multiple item using move to same path.(shift+F6) is now using target name filter.
ADDED - FileOperations settings that was access from CopyTo dialog is not also available from configuration menu
ADDED - Change file properties dialog (Attributes and FileTime) can now also change Created and LastAccess time.
ADDED - Custom Command "MC.Explorer.SizeFolder" no support the parameter "ONLYFOCUS" that will only size folder that are in focus
FIXED - 1 Crash problem reported by Crash report system.
Changes since build 1390
CHANGE- Changed how checking for new version works.
FIXED - QuickLaunchBar handled relatives paths better.
ADDED - QuickLaunchBar can create relative paths better
ADDED - QuickLaunchBar can now be configured on how to handle dropped files.
ADDED - Show hidden files command and Search command now available in menu and toolbar
FIXED - Lots of internal fixes and improvements.
Changes in previous beta
How to update to beta version
(Reply to this post if you have any issues or questions about the changes that are listed new for the beta here. For other issue use the normal Support forum board.)
3338
Support and Feedback / Re: delete many files is very slow
« on: April 14, 2013, 12:11:35 »
Well I can't say why it is slow for you.
Deleting to recycle bin is normally done very very quick, specially folders are moved fast, since it will move the entire folder instead of moving all files inside the folder individually
Deleting to recycle bin is normally done very very quick, specially folders are moved fast, since it will move the entire folder instead of moving all files inside the folder individually
3339
Support and Feedback / Re: delete many files is very slow
« on: April 14, 2013, 11:35:11 »
MC deletes as fast as windows allows it to delete.
If it is slow you must have something on your machine that interact or hook it self into the filesystem and slows it down.
It might be software like AV software , Undelete software, File History, or other
If it is slow you must have something on your machine that interact or hook it self into the filesystem and slows it down.
It might be software like AV software , Undelete software, File History, or other
3340
Support and Feedback / Re: delete many files is very slow
« on: April 14, 2013, 10:21:34 »
Sure you are not doing permanent delete ?. Because when deleting to trashcan the delete operation is handed of to windows to do that.
But if your trashcan is very full, windows will also start to remove files permanently from the trash.
But if your trashcan is very full, windows will also start to remove files permanently from the trash.
3341
Feature Requests and Suggestions / Re: Extended context menu with CMF_EXTENDEDVERBS
« on: April 10, 2013, 22:48:20 »
I thought I added that already , I know I lookup that flag.. Hmm Maybe I did not add it because of some reason I do not remember now.
However. I will take a look at it again and add see if I can add it.
, I know I lookup that flag.. Hmm Maybe I did not add it because of some reason I do not remember now. However. I will take a look at it again and add see if I can add it.
3342
Feature Requests and Suggestions / Re: Search
« on: April 10, 2013, 22:43:53 »
Strange. I did some test and it did find the text. But I will look into to more later.
3343
Support and Feedback / Re: portable installation on my nas
« on: April 10, 2013, 22:42:21 »
Not sure why it does not work. But I will look into it.
3344
Support and Feedback / Re: Is there any way to change tab control color?
« on: April 09, 2013, 07:07:44 »
The tab colors can not be change at this time. Maybe in the future..
3345
Support and Feedback / Re: Assign Ctrl + Left, Ctrl + Right to user command not working.
« on: April 09, 2013, 07:06:39 »
Not really a bug. Just a behavior of how the UI works. The UI that shows the files own those key for navigating. But might be possible to change so that they do not own all the Ctrl variants for some of the navigations keys
3346
Support and Feedback / Re: FTP - keyboard shortcut
« on: April 08, 2013, 14:57:02 »
FTP is a virtual filesystem in MC so just create a command or bookmark that goes to a the FTP path.
"FTP:\<bookmark name>" and it will connect and go to that.
"FTP:\<bookmark name>" and it will connect and go to that.
3347
Feature Requests and Suggestions / Re: Search
« on: April 08, 2013, 14:54:14 »
(Since search is not something that is change in the beta versions. This is not a "beta version" issue)
Searching binary files for text parts can be tricky, When searching for ASCII strings in binary files make sure that "search content as : ASCII" or "Unicode" if set to auto it will try to autodetect and with binary files it does not always autodetect correct and text matches might fail.
Searching binary files for text parts can be tricky, When searching for ASCII strings in binary files make sure that "search content as : ASCII" or "Unicode" if set to auto it will try to autodetect and with binary files it does not always autodetect correct and text matches might fail.
3348
Feature Requests and Suggestions / Re: Please add move tab command to customize keyboard :)
« on: April 03, 2013, 07:54:29 »
The standard Next tab/Prev tab keys can not be changed.
But you can change tab using script. But only to a fixed tab like
MC.SetActiveTab PANEL=ACTIVE TAB=2
But I can add so it can do Next/Prev tab there like this.
MC.SetActiveTab PANEL=ACTIVE TAB=NEXT
MC.SetActiveTab PANEL=ACTIVE TAB=PREV
Then you create a user defined command with that command and assign you own keys for that.
But you can change tab using script. But only to a fixed tab like
MC.SetActiveTab PANEL=ACTIVE TAB=2
But I can add so it can do Next/Prev tab there like this.
MC.SetActiveTab PANEL=ACTIVE TAB=NEXT
MC.SetActiveTab PANEL=ACTIVE TAB=PREV
Then you create a user defined command with that command and assign you own keys for that.
3349
Support and Feedback / Re: Showing folder size in virtual
« on: April 01, 2013, 15:30:58 »
You can change how the size should be shown.
Menu > Configuration > Explorer Panel setting > Display tab
And Under "Detailed View Mode"
You can configure how size should be shown.. Auto/Bytes/Megabytes/Gigabytes
Menu > Configuration > Explorer Panel setting > Display tab
And Under "Detailed View Mode"
You can configure how size should be shown.. Auto/Bytes/Megabytes/Gigabytes
3350
Feature Requests and Suggestions / Re: replace characters ( 1 or more?) to a fixed posion in multi-renaming
« on: April 01, 2013, 13:13:56 »
No need since you can use Multiple [N] tags and then you can build the new name and skip characters at fixed positions