Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Topics - Isabelxxx

Pages: [1]
1
http://forum.multicommander.com/forum/index.php/topic,1457.msg5289.html#msg5289

Quote
FLAT Filesystem View
If you find any bugs/issue with flat filesystem view, report it.. Flat view is not a mode I use my self and I will probably miss many of the issue when testing. And if people who uses it do not report the issues it will probably not be fixed.

Also I do not like the way it is activated now (from the viewmode popup).. Suggestions are welcomed..  Icon on toolbar?  Icon in another place?
Hot key.. (what combo), Menu ?  .. another ?

*Multicommander hangs indefinitely & crash when using Flat View with too many folders/files, checked several times. The behavior is really strange since it first cache all files from HDD, if the time doing that is too big then it will finally end the caching process (HDD stops reading) but the UI continue unresponsive. Then if I restart MC and try to Flat View the same path it usually works.
Can't say where is the limit... I work with +10^4  files, 2-3Tb total size
(TC works right anytime in same circumstances, not a HDD problem)

Features request:

*Create a new active window (at top) while caching the files showing the progress and sub-folders being analyzed; no more waiting without knowing how it is going.
Cancel button allows you to stop at any point without waiting MC to finish. It would load the partial list.

See attach. 1

*Hot key --> CTRL+B          (Button Window to ---> CTRL+SHIFT+B)

*Menu --- > Move to View.

See attach. 2

*In fact I would suggest to play a bit more with the menus, differentiating the general UI behavior (UI or Appearance) and the explorer panel options (view).
Flat view still goes to View, explorer panel width and options too. View modes not so hidden, just at bottom.  (stop/refresh should be there too, my fault!)
The rest of UI options not related to explorer panel would go to UI menu.

See attach 3

2
Feature Requests and Suggestions / Suggestions for File Checksum
« on: January 28, 2016, 12:58:54 »
Hi Mathias, I appreciate all the work you did with that extension within MC in the last months fixing the remaining bugs and adding unicode support, all working as expected.

Recently I got some corruption in my HDDs and used the file checksums to analyze which files got corrupted... in the process I found I missed some things to make it that system totally reliable.

Corrupted Checksum files (*.md5, *.sfv, ...) are not loaded by the extension nor can be identified. I found this to be a problem because apart from having my files (to be checked) corrupted, some of the sfv files themselves were also corrupted. If I try to check them nothing happens since the info stored is not readable BUT the program also does not warn you about it.
Is not important when you just check one file but it does if you are checking 10000 sfv files without user attention, just loading the entire batch from folders and subfolders. You have no way to know if a small numbers of all your sfv files is not being loaded at all.

1. Add total number of checksum files analyzed/loaded at the bottom of the file checksum window.
Quote
Result: WWWW checksum files analyzed, xxxx files OK, yyyy files failed, zzzz files missing

This lets the user to compare the number of checksum successfully loaded against the total checksum files. At least gives some clue about some of them failing to be read or missing files. If you have X folders and you expect to have the same number X of checksum files, it becomes really helpful.

2. Warn about checksum files not being as expected. For ex... 0 byte checksum files, checksum files without any CRC stored, etc. Corruption is easily identifiable no need to make complex analysis. If you load a sfv file but it can not be checked as sfv then I expect the program to warn me about it, not just omitting it.
Show them the same failed checksum files or missing files are also shown in the result window, and maintain them after clearing successful from list.

3. Delete individual entries, something simple, just "supr". There is a clear all and clear successful from list options, but can not remove an specific checksum file from the list, independently of its status. Really useful when you are working with the final failed results to recover the wrong files or have to recreate the checksum file (since it is not reloaded from disk but memory once it's on the list).


3
Have been looking for some info about the filters in the explorer panel but no luck.

Not sure if it's already implemented or not but... is there a way to filter files and folders according to the attributes?

In fact my specific problem is listing all Symlinks within a folder. The symlinks point to other subfolders.

Have tried to sort by attribute option via the "Attrib" column but it doesn't work. Standard folders are shown as ----d and the symlinked folders as ----l, that's right, but can not sort them. For some reason it doesn't work properly for those flags.

Then I tried with the filters but I have not found the way to filter using attributes.

Any tip?

4
Support and Feedback / File Checksum broken
« on: May 02, 2015, 18:33:03 »
Hi, just seen you updated the program with the Unicode Support but now there is something definitely wrong.

Using Multicommander to create a checksum file

H:\New test.rar

Output sfv file:
Code: [Select]
N e4e5a3

h:\Musica_vinilo\Omega\10000 lépés {luckburz 1969 HUN 1st Qualiton LPX 17400}\
Code: [Select]
10 - Félbeszakadt koncert.flac
09 - Spanyolgitár legenda.flac
08 - 1958-as boogie-woogie klubban.flac
07 - Tízezer lépés.flac
06 - Tékozló fiúk.flac
05 - Kérgeskezű favágok.flac
04 - Udvari bolond kenyere.flac
03 - Tűzvihar.flac
02 - Gyöngyhajú lány.flac
01 - Petróleum lámpa.flac

Output:
Code: [Select]
0 68a2cb3b
0 70862fb6
0 3b81c27e
0 5c6be97e
0 a89de4d3
0 8f1a3448
0 c790ef0c
0 33f646d1
0 88c8344f
1 c40a8568
1 e4ce9dfe

Tested several times with different folders and files, no names are written in the sfv file using the last versión. Just the first character and the checksum.




Loading an unicode sfv file (created with total commander) from

h:\Musica_vinilo\Omega\10000 lépés {luckburz 1969 HUN 1st Qualiton LPX 17400}\

Code: [Select]
; Generated by WIN-SFV32 v1.0
; (Compatible: Total Commander 8.51a)
art\Gatefold Inside.png 22413440
art\Gatefold Outside.png 592C79D6
art\Poster.png E26B0256
art\Side A.png AAF84704
art\Side B.png D894FB4C
Flac_MD5.ffp 7EF399A9
01 - Petróleum lámpa.flac 68A2CB3B
02 - Gyöngyhajú lány.flac 70862FB6
03 - Tűzvihar.flac 3B81C27E
04 - Udvari bolond kenyere.flac 5C6BE97E
05 - Kérgeskezű favágok.flac A89DE4D3
06 - Tékozló fiúk.flac 8F1A3448
07 - Tízezer lépés.flac C790EF0C
08 - 1958-as boogie-woogie klubban.flac 33F646D1
09 - Spanyolgitár legenda.flac 88C8344F
10 - Félbeszakadt koncert.flac C40A8568
cover.jpg EA172055
foo_dr.txt 50656364
Info.txt CB847F8B
info_avax.txt 8CFA4173

Still those files using unicode names not being recognized. Ansi sfv files working as expected.

All that using last version, portable, from clean install.

5
Support and Feedback / File Checksum Plugin in Unicode?
« on: February 13, 2015, 17:57:42 »
I'm having a problem when checking SFV files which contain unicode file names. The SFV files (or Md5) are created via total commander and work great there. Both creating/checking.
But when using the FC plugin in Multi Commander those files are not found and the names appear with strange characters.

Code: [Select]
01 - Petróleum lámpa.flac
02 - Gyöngyhajú lány.flac
03 - Tűzvihar.flac
04 - Udvari bolond kenyere.flac
05 - Kérgeskezű favágok.flac
06 - Tékozló fiúk.flac
07 - Tízezer lépés.flac
08 - 1958-as boogie-woogie klubban.flac
09 - Spanyolgitár legenda.flac
10 - Félbeszakadt koncert.flac

Also, if I create the SFV file within Multi Commander there are still some files not recognized

Code: [Select]
04 - Udvari bolond kenyere.flac
06 - Tékozló fiúk.flac


Is there any way to set the plugin to work with Unicode? It's a pitty this limitation since this is the only program which has a built it virtual explorer for checksum files...

Pages: [1]