Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Mathias (Author)

Pages: [1] 2 3 4 5 ... 154
1
Beta Releases / Re: version 11.3 Bug ?
« on: Today at 07:37:46 »
If the error was about path being to long it would say so.  The character limit is around 4096 but if it is over network it can be lower depended on system there.
Most error windows return a error code and that error is shown also the FileOperation log can have more info about errors (Ctrl+L)
But what error did you get ?  Without anymore information it is impossible to say why. It can lots of different reasons.


2
Support and Feedback / Re: Details directory info sometimes disappears?
« on: September 17, 2021, 16:27:25 »
Thanks.

Turns out everything except file name was scrolled off the screen to the right but it did not look like it at all and I don't know what caused it to be that way.  (see attached image)

I spent 3 minutes having to drag the tiny vertical line of each column separately to put it all back in a visible place.

next time, try double click in the area between the columns in the header. (where you drag them).. then it shrinks that column based on content.. however if one file is super long. Yhen it will fly away

3
Beta Releases / Re: version 11.3 BETA (Last updated 16-Sep-21)
« on: September 17, 2021, 15:04:15 »
Quote
ADDED - Support for Changing Config/Log/Userdata path
ADDED - Support for redirecting some config files to locations.

Mathias, can I have a bit more info on these option, please?

I can't see any way to access them through the interface...
There is no interface for them. and will not be, It will be a special file that allowes for path to be overwritten. (Mainly for IT Pros that want to control stuff for users. but also other reasons)
But info will come when they are better tested better finalized

4
Beta Releases / Re: version 11.3 BETA (Last updated 10-Sep-21)
« on: September 16, 2021, 08:35:54 »
Hi,

Build 2810 introduce problem with colour of the tabs, MC do not read my setting where I chose dark grey colour.
In this version tabs has blue colour I think default one.
There is still an issue with colour & type of the lines different than solid. By pressing down arrow the colour changes to white or default (red marking). Any other movement using arrow or mouse above panel restore the colour of the lines (green marking). I'll try to record the screen and send directly to you.
I will check the tab things

Line with dots/dashes not working thing, I cannot recreate that, it works for me. and there is not much I can do about that. might be depending on HW or something like that. I know a long time ago that drawing lines with special flags (here it is that the line should be drawn dottet and dashed), some gfx card / drivers has issues with that. I dont know if that is the reason here or not.
Can also be some other options you have that comes in conflict but I have not found any that might cause that.

5
Try latest beta. "." should work there but since the first path parameter is for the left panel it is opened there.

6
Support and Feedback / Re: Details directory info sometimes disappears?
« on: September 15, 2021, 07:21:04 »
I have never seen that.
Is the column removed from the header ? or is it out of view( so you have to scroll ) ?
You have not created a customized header layout what is without the date column that it is using ?

7
Support and Feedback / Re: Duplication of network files and folders.
« on: September 14, 2021, 14:23:47 »
I know that in some weird situation it can show duplicates sometimes.. it can happen when the filesystem is refresh at the same time it is redrawing it or something like that,  It is some weird situation like that. It is a timing issue. However I have not been able to recreate that.

Pressing refresh (F2/F5 depending on settings) should refresh it and correct it.

8
Beta Releases / Re: version 11.3 BETA (Last updated 10-Sep-21)
« on: September 10, 2021, 14:21:45 »
Thanks Mathias.
Yeah I figured the appcrash stuff was minimal use (hence FWIW) next time I'll just use the dump creation.
I have just been looking at windows logs & for dumps but you beat me to it ;)

BTW The upload URL gives a
Quote
"Sorry, there was a problem uploading your file.

Storage is low on free disk space"
msg  :(
Issue fixed
Just run the MultiUpdate.exe tool and update to 2810

9
Beta Releases / Re: version 11.3 BETA (Last updated 10-Sep-21)
« on: September 10, 2021, 14:10:10 »
Just installed 2809
Cannot get past the startup flag @ reading config.  No idea if anything (eg error dialog) is behind it as it is 'fixed'.
Clicking on it makes it crash/close.

Really like the new copy / move dialog that appeared in the last release. Thanks Mathias   ;) 8)


Btw Jus so you know, the Appcrashview stuff is no help, it tells me nothing. specially since it is a hang and not a crash.  ;)
Anyway I cannot replicate that. works on all machines here.. that strange..

Portable or installed ?

Can you start again and then when it hangs crash go into TaskManager and right click on MultiCommander.exe process in detaliled view and select Create Dump.
And then zip/7z it and upload it to http://multicommander.com/upload
Then I can see at what stage in the program it halts

Nevermind I been able to recreate it

10
Beta Releases / Re: version 11.3 BETA (Last updated 10-Sep-21)
« on: September 10, 2021, 14:04:51 »
Just installed 2809
Cannot get past the startup flag @ reading config.  No idea if anything (eg error dialog) is behind it as it is 'fixed'.
Clicking on it makes it crash/close.

Really like the new copy / move dialog that appeared in the last release. Thanks Mathias   ;) 8)


Btw Jus so you know, the Appcrashview stuff is no help, it tells me nothing. specially since it is a hang and not a crash.  ;)
Anyway I cannot replicate that. works on all machines here.. that strange..

Portable or installed ?

Can you start again and then when it hangs crash go into TaskManager and right click on MultiCommander.exe process in detaliled view and select Create Dump.
And then zip/7z it and upload it to http://multicommander.com/upload
Then I can see at what stage in the program it halts

11
There is no general issue with unpacking large zip archive. It works with all large archives I have that are over 5GB+
Might be something special with just those archive you downloaded. So it is impossible for me to say why it does not work for you.

If you look in the logfile (Ctrl+L) is there any additional error information ?


12
I copy folder from my camera to my hadrdrive for backup purposes.

When I copy the same folder again I get to choose what to do with the filders already on the harddrive. Since I don't want to copy them again I select "skip all" I expect MC to skip all the files that are already on the harddrive. But it doesn't. The next file i get the same pop-up with the same question again.

Did I miss an option somewhere? Or is this a bug in MC?
I cannot recreate this.
How is the camera accessed ? is it accessed like a normal filesystem ? or remote device or other ?


13
This seems to be a bug. I already asked about it in 2019, but the developers seem not to care about it. Shouln't be hard to fix anyway.
Think is never as easy to fix that most people think. if stuff are easy to fix they are fixed quickly.
Most often also the bug report is bad and faulty so it cant be replicated, or the issue is more complex to fix and other stuff have higher prio.

14
Beta Releases / Re: version 11.3 BETA (Last updated 28-Aug-21)
« on: September 03, 2021, 11:18:33 »
@Mathias (Author)
Could you please answer my email about adding an option to overwrite (replace) default path to some configuration files and UDC Script directory?
Also, what do you think about it?
Is it possible to add this for next release?

Thanks,
-Pawel
Yes I saw both of them, It's require a bit to answer and I had not had the time.

16
Support and Feedback / Re: No post?
« on: September 02, 2021, 07:44:50 »
Then you deleted it your self or it was not saved when you press post.
Or you posted in an other section and are looking for it in wrong section maybe.  Click on your profile and in the menu on the side you can list all your post and you should find it

17
Beta Releases / Re: version 11.3 BETA (Last updated 28-Aug-21)
« on: September 01, 2021, 00:00:29 »
It seems that the loading of Tab Sessions go now very much faster, also when programs open which this process slowing very much down. This programs slowing dwn yet, but no more so much.
Eh ? I don't understand.. what is slower ?
I posted this already after other releases and i made some threads about the problem: "Loading Tab sessions is to slow because of some reasons or also without any reason".

But now is the speed very much faster than before. It seems that something which was slowing down the speed was removed. :)

Strange because nothing around that is changed.

18
Beta Releases / Re: version 11.3 BETA (Last updated 28-Aug-21)
« on: August 31, 2021, 08:29:53 »
It seems that the loading of Tab Sessions go now very much faster, also when programs open which this process slowing very much down. This programs slowing dwn yet, but no more so much.
Eh ? I don't understand..Nothing is changed with tab session. so what with them to you fell are faster?  what are slower ?

19
Beta Releases / Re: version 11.3 BETA (Last updated 28-Aug-21)
« on: August 31, 2021, 08:03:01 »
It seems that the loading of Tab Sessions go now very much faster, also when programs open which this process slowing very much down. This programs slowing dwn yet, but no more so much.
Eh ? I don't understand.. what is slower ?

20
Beta Releases / Re: version 11.3 BETA (Last updated 28-Aug-21)
« on: August 30, 2021, 13:37:49 »
1. Will fix that.

2. Strange. I'm not able to recreate that.

3. Yes the change of how config is read messed up this.  Will be fixed


Hi Mathias,

I'd like to share with you few points which I found in newest MC build 2803:
1. Missing possibility to translate "of" info on copy/move dialog box.
2. When switch to different line than solid, by pressing down arrow, lines change the colour to default one (brighter then one I set in options). Situation change when I move mouse cursor above or go by pressing up arrow. Some issue with refreshing I guess.
3. Colour of active panel change to default even I set in options different one.

BR
Lukasz

21
Beta Releases / version 11.3 BETA (Last updated 16-Sep-21)
« on: August 28, 2021, 15:07:47 »
This is the beta release of the next version. It has not been fully tested.
If any of the function listed below have issue please report them
If you find issues that about things not in the list below. Then post a normal bug report in "Support and feedback" section.


-- 2812 - 16-Sep-21
  ADDED  - Added support for AdditionalScriptFolders in the CustomConfigPath.xml when redirecting config files
  ADDED  - FileType setup now support the Windows verb 'Enqueue'
  FIXED  - Tab Colors are now read correct again
  FIXED  - 3 Stability issues
  CHANGE - More code cleanup

-- 2810 - 10-Sep-21
  FIXED - Hang during startup on some systems

-- 2809 - 10-Sep-21
  ADDED - Support for Changing Config/Log/Userdata path
  ADDED - Support for redirecting some config files to locations.
  ADDED - Path sent as parameter to multicommander now support  "." for current folder
  ADDED - Some part of startup process is now run in parallel.
  CHANGE - Mode code cleanup

Build 2803 - 29-Aug-21
  CHANGE- Code cleanup and removed unused code, and refactored how core settings are read
  ADDED - Updated language pack. Was missing in 2802

Build 2802 - 28-Aug-21
  CHANGE - Copy/Move Progress dialog changed. Can now show Read/Write speed separately and some other changed.
  ADDED - Option to prevent Windows from autoscaling in MultiMontor setup with different monitor scaling.
  ADDED - Option to tweak how fast a refresh of the filesystem should happen when filesystem is changed
  ADDED - Setting for gridline line type.
  ADDED - Mouse command 'Go to parent folder' for Mouse configuration
  FIXED - Changing Attributes/Datetime on items in RESx: virtual device now works.
  FIXED - Improved navigation when filelist is in ListView mode.
  FIXED - Home/End keys issue in some edit fields.
  FIXED - Overwrite Readonly files issue when upacking zip archive
  FIXED - 4 Stability issues


** Copy/Move Progress Dialog **
This is the biggest UI change. There is no more detailed information there when doing copy/move also some information have moved around to other places.
It now shown the read/write speed separately , Is any other information missing ? is it too much ? maybe an option is need to disable some of it. ?

**** A lot of how config files are read have change and also how the program is initializing things during startup. let me know if you have any issue that can be caused by that ****

22
I suspect that the 3rd party code I had for that does not support reading localized text..  I have not been able to test since I do not have files that this happens on.

23
Menu > Configuration > Explorer Panel Settings > Display (Tab)
At almost the bottom of list of settings there is a "Save on exit" section. make sure that you uncheck "Remember only path to local"

24
Support and Feedback / Re: Change date/time on search results
« on: August 28, 2021, 12:22:22 »
Looks like the "Change Attributes and DateTime " feature do not handle virtual items.. I will fix that.

25
Support and Feedback / Re: Increasing Font Size
« on: August 12, 2021, 09:48:44 »
Menu > Configuration > Explorer Panel Settings > Fonts (Section)

Pages: [1] 2 3 4 5 ... 154