Messages

151

Beta Releases / Re: v13.0 **BETA**

« on: May 17, 2023, 23:26:37 »

An archive is not being unpacked in the target folder, but rather in a subfolder of the target folder with the same name as the archive. I believe I recall this behavior being different in the past, when I could unpack the contents of the archive directly into the target folder.

When unpacking multiple files, you get them into subfolder if "unpack archive into individual folders" are checked in the unpack dlg. (and it is by default)

152

Support and Feedback / Re: Wrong IMG Dimension

« on: May 15, 2023, 08:38:25 »

Witch img diminsion columnn is that, there are two one that take the diminsion from the meta data. (faster) or the other that read
One is the dimensions stated in the metadata.. "Picture (EXIF) dimensions" and one that checks the actual image file "Picture (IMG) - Dimensions"

I guess the you show the size from the ExiF metadata.. This can be wrong if the image is resized and the program did not update the metadata tag with the new size.

153

Beta Releases / Re: v13.0 **BETA**

« on: May 10, 2023, 18:39:26 »

64bit version is now in the 64bit package

When the Upgrade tool start click on settings and check "upgrade 32bit to 64bit version" before you press start upgrade..

154

Beta Releases / Re: v13.0 **BETA**

« on: May 10, 2023, 08:11:44 »

Hello ,
Mathias new update of MC Beta changes 64bit version to 32bit. Even if you check option "Upgrade 32bit version to 64bit" in MultiUpdate, it still installs 32bit version.
What's interesting, it downloads zip file with 64bit version (MultiCommander_x64_Update_(13.0.0.2945).zip), but after installation it turns out to be 32bit.

Ahhh.. Ok the new publishing script must name the files wrong. I will fix that that tonight with a new version.

155

Support and Feedback / Re: Hover preview function keeps getting switched on

« on: May 09, 2023, 17:15:17 »

That is strange. But some AntiVirus software are hooking them self into the process of running application..

Are you activating the scanning from within MC ?  and how ? context menu ?
What AV software is it ?

156

Beta Releases / Re: v13.0 **BETA**

« on: May 09, 2023, 17:13:23 »

Mathias i have a widget on the desktop that shows cpu for processes. This mc beta shows between 6 and 7% cpu being idle. I never saw that before so i downgraded to latest stable and cpu use is normal again, so low it doesn't even show up anymore.
Also where is the page to download older beta's please, the previous one was working fine.

Also, while i have your ear, for me a weak point in mc, my favorite filemanager, it how it handles a network share that is gone, it does not respond for a long time, no other filemanager takes so long.

That very strange since there is no new functions that run in the background or anything like that. difference between the two beta are very low, only fixes and only major change are in Preview Panel, and if you did not even use that. everything is like before.
Can you create a dump of the process when it using CPU and upload to https://multicommander.com/support/upload

I don't think MC can take longer before responding then others, when shares are gone, unless some other program bypasses Windows Networking and do there own networking. MC is using the Windows network api. It is Windows that control how long it waits for it to timeout.

There is no revert of beta. You have to go back to 12.8

157

Beta Releases / Re: v13.0 **BETA**

« on: May 09, 2023, 13:16:56 »

Thanks for the update Mathias.

Just installed b2945 & it seems to have lost many of the entries on the right-click context menu.
MC entries are intact but 3rd party entries have mostly gone.
Any way to recover these or is it necesssary to reinstall the apps?

I used autoruns to inspect the system & the reg entries etc are intact.  The context entries are also OK in Vanilla Explorer.   

Nothing around that is changed.. changes are just minor fixes to the things in the previous beta
Also MC do not control external options in context menu, MC just ask windows to fill up the menu.
Can it be that you went from 32bit to 64bit ?
64bit does not show shell extensions that are only 32bit.. and the other way around

158

Feature Requests and Suggestions / Re: The limited amount of extensions for file rule coloring

« on: May 09, 2023, 08:13:18 »

Yes, default maybe should be extended.

You can also modify your own in the Color rules editor.

159

Support and Feedback / Re: Simple tree and file pane view

« on: May 08, 2023, 08:01:36 »

Hejsan Mathias

Why can I not get a nice and simple tree and list view as you have in your online manual? (See the attachment).
I am forced to have a 2. list view that I don't use, because "Split size 0/100 or 100/0" can not be saved between sessions.
What is the trick you use?

You can show that tree by pressing the tree icon on the toolbar inside in explorer panel. That screenshot is just a cut to show that panel. not the entire application.
MC always has 2 panel. It is designed around this concept where the "other" panel is always the default target for different operation. This is very efficient if you are a keyboard user and do not want to use the mouse unless when you really need to.
So therefor 0/100 and 100/0 split is not supported. Even if you do a 0/100 split there might be a panel showing that is hidden that you can do stuff to without knowing it.
There are tricks to get around it and do it..  By settings this in an auto load script. but then you are going out of the way to do it manually, and then I hope you fully understand the risk.

160

Support and Feedback / Re: sorting folders by date

« on: May 05, 2023, 13:34:27 »

Not sure what you mean
But you click the column header to sort by that column,
You can also in Explorer Panel settings under the "Sorting and Columns" section you can change if files and folders should be sorted separately

161

Support and Feedback / Re: Hover preview function keeps getting switched on

« on: May 04, 2023, 15:31:17 »

Hover preview have no settings. There is no setting that remembered if it should be on/off between starts. it is always off when MC starts.

Yes. keep an eye on it and see if it happens again and what you did around that time.

162

Support and Feedback / Re: Hover preview function keeps getting switched on

« on: May 04, 2023, 07:31:06 »

Is this a new function? I've never seen this before, and I don't have a toolbar with this button. Also, this option is not available in the settings. And I can't find this button. Just pressing Alt+Q enables and disables this function.

It newer

I don't use ALT+Q in any other program. It's something that started after an update was made to MC. Suddenly I discovered that contents in a folder were displayed when the mouse pointed towards it and I saw the new feature called the hover preview. It gets automatically switched on from time to time, especially when I switch to and browse external drives. I did save the MC configuration with the function switched off and that seemed to solve it for a short period of time. Unfortunately yesterday I discovered the function problem again.

I hope someone knows how to solve this, as I find it an awfully irritating feature. Aside from that, MC works fine and does the job perfectly.

I edited my posts to clarify it's the hover preview function.

It is only turned on manually and it does not save any settings for it. It is only used for the session until toggled off.
And there is nothing that automatically turns it on like a settings for always on or something like that. Only way to turn it on it to click the icon or shortcut key

So I don't know how it can just turn on for you. Something must send a message to MC to turn it on, You don't run any other program that hook them self into the MC processes ?
Thinking that it might be some message id conflict for that app that hook them self into MC and that app..

163

Support and Feedback / Re: Hover function keeps getting switched on

« on: May 03, 2023, 18:41:28 »

It will toggle on with Alt+Q.. You maybe have Alt+Q for some other program so that you sometimes press that when MC is in focus ?

164

Support and Feedback / Re: Run with CMD param "-AutoRun=userCommand" when an MC instance already running

« on: May 03, 2023, 13:16:42 »

The -AutoRun parameter is sent to the instance you are starting. If "only allow single instance" is active. Then MC is already running and will then not call the AutoRun command.

You can command Hotkeys inside MC to user defined commands.

165

Support and Feedback / Re: read/write strategy normal safer than power?

« on: April 24, 2023, 13:13:59 »

The Read/Write stratergy are mostly for performance reasons.
Windows takes care of the low end part for read/writing data and to make sure that data is written correctly.
So unless there are some issue with the HW there should be no risk of write errors. Todays drives actually write a lot of errors that are corrected automatically by the drive.

But some drives and Hardware will work faster if buffers are at some sizes, and if cache are used or not used and thinks like that.
Or if read and writes are done at the same time if you are using two different drives.
Most of the time it is fast to bypass the cache if you are writing large files. Since there is no need for it to be cached. Unless you are also doing lots of other work on the drive and want it to be caches so it is flushed to the drives in large blocks..
The data pass many layers of hardware/'hardware drivers' before they are actually written on the disk. And if one layer does not support some optimization, it will not be faster, but would still be written correctly.

166

Support and Feedback / Re: some mp4 videos do not get thumbnails

« on: April 21, 2023, 08:16:00 »

MC do not create thumbnail for mp4 it self.. It asks Windows for them. You can enable logging of the thumbnail process in the Core Settings > FileSystem (tab), And then it might log if there was some error. might be that the file was used by anohter process or something.
Or if there are a lot of them, they are queue and can take time to be processed

167

Support and Feedback / Re: Why does the File Edit etc disappear?

« on: April 11, 2023, 11:06:41 »

I am sorry, I had a stroke and it means I have aphasia.

Ctrl+M, at last!

Ahh Yes Ctrl+M will toggle the entire menu bar on/off

168

Support and Feedback / Re: Why does the File Edit etc disappear?

« on: April 10, 2023, 20:51:50 »

Disappear ? not suer what you mean.

Men you can access file edit command on many ways.

Menu > File > Edit File

Press "Edit File" icon on Toolbar ( Icon num 13, next to the icon that has a Magnifying glass )

Press the Edit icon on the Button bar.. (button 4 on first row )

If you have commander styled look'n'feel press hot key F4, for Windows Explorer styled setup, it is F9

Right click or Right button double click (depending on setup. ) and from Popup menu  "MultiCommander > Edit File"

169

Beta Releases / Re: v13.0 **BETA**

« on: April 09, 2023, 01:07:24 »

Hi Mathias. - thanks for the new beta.

But is the latest not 2943 (instead of 2944 , as stated above?)

Yes you are correct. I have modified it

170

Beta Releases / v13.0 **BETA**

« on: March 29, 2023, 12:00:48 »

Not many new things. (I been very busy and have not had much time to spend on MC)
But there is some new features, The big one is the Data Preview Panel. It is like the Hover Data Preview but instead of showing data preview in a hover window, it will be shown in a panel.
Also you can now drag and drop files on a tab header to make that tab go to that location and if dropped in empty tab area a new tab is opened.

+ 45 Changes


-- Build 2950 - 2023-06-02
 ADDED - Dialog warning about not enougth free space when starting a copy operation will ow show how mush is needed and how much additional free space is needed
 ADDED - Device that are marked as offline will now be skipped on a couple of situations.
 FIXED - 1 Stability issue

-- Build 2948 - 2023-05-22
 FIXED -  When renaming and file is open by other process, MC will now have an action to retry in the error dialog.
 ADDED -  Will try to ask Windows if a Remote device is availible. Sometimes Windows will report as availible even if it is not.
          But when it does report it as disconnected. MC will not hang waiting for a timeout at startup

-- Build 2946
 FIXED - Publish system, 64bit version in now package into correct update files.

-- Build 2945
 ADDED - When Previewing images in panel the image will now be fetch using WIC ( Windows Imaging component )
         instead of Windows thumbnail system since the thumbnail system always returned a squered image.
 ADDED - Data Preview in panel can now take focus. Allowing for wheelzoom when preview is showing text
 ADDED - Better dark mode support for Data Preview
 CHANGE- PASV is now default for new FTP connections
 ADDED - Foldertree can now customize font size
 ADDED - Middle click on folder in tree will open folder on other panel
 ADDED - Foldertree expand/collapse icon changed
 FIXED - Issue when canceling FTP quick connect dialog
 FIXED - Editing large QWORD Regvalue in REG:
 FIXED - 2 Stability issue

-- Build 2943 - 2023-03-31
 FIXED - Language pack submit now works again
 FIXED - Packing 7z archive, The progress bar will now work better.
            However it will not show current file being packed since the newer 7z used packs files in parallel
 FIXED - 2 Stability issues

-- Build 2942 - 2023-03-28
 ADDED - DataPreview can now also be shown inside a Panel
 ADDED - Dropping file/folder on tab header that tab will go to that folder and file
 ADDED - Dropping file/folder on empty tab area and a new tab will be opened for that folder and file
 FIXED - 3 Stability issues

171

Support and Feedback / Re: Multiupdate failure

« on: March 29, 2023, 10:03:14 »

Fixed now

172

Support and Feedback / Re: "Quick Look'n Feel" resets to defaults

« on: March 27, 2023, 13:46:54 »

I think that was it 
I haven't seen the problem for some time now.

All I did was to add the folder
...\AppData\Roaming\MultiCommander\Config
as an exclusion to Microsoft Defender Antivirus scans.

It's a bit annoying that Microsoft considers MultiCommander "potentially unwanted software"!

That is a bit weird..  specially since you do not have any executable files there.  Just text files (xml)

173

Support and Feedback / Re: Update the Microsoft store version?

« on: March 22, 2023, 08:16:39 »

It is coming. It failed auto validation when publishing new version. So I needed to rework how somethings works. MS changes rules sometimes on what APIs you are allowed to use for Store apps..

174

Support and Feedback / Re: How to assign a shortcut to this location?

« on: March 21, 2023, 14:49:12 »

unless you disabled it,
just start typing and what you type ends up in the command line field..and if you type a path there.. and press return.. The panel in focus will go to there.

Ctrl+E will move focus to the Path field in active panel. and you can changed path there too

175

Support and Feedback / Re: "Quick Look'n Feel" resets to defaults

« on: March 17, 2023, 18:37:55 »

Thats very strange. I never seen that.

MC will restore the file if they are missing when starting.
But there is not other function in MC that will revert them.