51
Support and Feedback / Re: Log file output issue
« on: December 09, 2020, 18:50:22 »
Thanks Mathias.
Yes I am just using the copy option now
Yes I am just using the copy option now
News:
January 2024
MultiCommander v13.5 is released!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
52
Support and Feedback / Log file output issue
« on: December 08, 2020, 23:16:04 »
In Win10 with MC 10.1 b2743 x64
Using Log window (file operations tab) I found that using select all > copy to file for log contents creates an empty 0 byte txt file.
The contents when just copied are fine & paste into a txt as normal.
One for the bug list?
Using Log window (file operations tab) I found that using select all > copy to file for log contents creates an empty 0 byte txt file.
The contents when just copied are fine & paste into a txt as normal.
One for the bug list?
53
Beta Releases / Re: v10.0 Beta 2728
« on: September 22, 2020, 17:38:08 »
Thanks for the improvements Mathias. Liking it so far
I am wondering if there is some way to alter the hidden files & folders coloring in Dark mode when they are shown?
Currently things like pagefile.sys & $WINDOWS.~BT are black when unselected & I'd like to hi-lite the label text but cannot see how
....& whilst I'm being awkward, I'd also like to put a white border on the "KB" of the Calculate Folder Sizes Icon on the top bar...
I am wondering if there is some way to alter the hidden files & folders coloring in Dark mode when they are shown?
Currently things like pagefile.sys & $WINDOWS.~BT are black when unselected & I'd like to hi-lite the label text but cannot see how
....& whilst I'm being awkward, I'd also like to put a white border on the "KB" of the Calculate Folder Sizes Icon on the top bar...
54
Beta Releases / Re: v10.0 b2725
« on: September 21, 2020, 14:09:39 »Thanks Mathias 2726 fixes it.The quick launchbar is dark..
The GUI looks good with this makeover. Will you be able to make this quick-launch toolbar Dark also?
FYI - I noticed that when making the filelist fields Dark the scroll bars stay Dark if/when reverting to original colors until MC is restarted.
ANd yes some UI elements cant be changed untils MC is restarted. After you enabled it there will be a dialog notifying about a restart is required if all UI element should change
Ah, I'm not seeing any restart req'd dialog anywhere so I'm only doing half the job
Now I just need a way to make all file coloring rules 'neon' automatically
BTW FTP is working OK for me.
Thanks Mathias.
Update
FYI I noticed the filter dialog (attached) has a problem.
55
Beta Releases / Re: v10.0 b2725
« on: September 20, 2020, 15:13:06 »Is there a changelog for this beta? I only saw it when updating but can't find it elsewhere.
This was written by the update to b2726
Code: [Select]
Release v10.0 BETA (Build 2726) ( 19-Sep-2020 )
-- 2726 (Beta)
FIXED - EntireRow QuickLaunch bar now works again
ADDED - MultiScript SaveStringToFile can now append to file
-- 2725 (Beta)
ADDED - Enable/Disable Dark Theme settings that also can change some customized colors if wanted
ADDED - New Toolbar that support dark mode and resizing better (and other improvments in the toolbar)
FIXED - DeviceCombo is now updated correctly when devices are added/removed
FIXED - Lots of minor fixes and changes to support dark theme
FIXED - ComboBox Popup fixes with High DPI mode
FIXED - High DPI Issues with Checkboxes
ADDED - ComboBox now support dynamic width with the popup
ADDED - Makesure Alt+Arrow Down and Alt+Up withs in Combobox to show/close popup
FIXED - Sometimes device combo was not updated.
ADDED - DarkMode support on Windows 10 in MOST places.. MC have over 100 dialog so only the most common are changed
Using Undocumented Windows 10 API. so might stop work on new version of Windows.
See Forum for more info http://forum.multicommander.com/forum/index.php/board,8.0.html
ADDED - FindFiles option to do content search in binary files.
ADDED - FindFiles will no longer by default search binary files when doing content search.
ADDED - Custom ComboBox (Dropdown) controller that support darkmode
ADDED - Command field command to set position and size of MC. ":setpos x y""
56
Beta Releases / Re: v10.0 b2725
« on: September 20, 2020, 15:08:50 »
Thanks Mathias 2726 fixes it.
The GUI looks good with this makeover. Will you be able to make this quick-launch toolbar Dark also?
FYI - I noticed that when making the filelist fields Dark the scroll bars stay Dark if/when reverting to original colors until MC is restarted.
The GUI looks good with this makeover. Will you be able to make this quick-launch toolbar Dark also?
FYI - I noticed that when making the filelist fields Dark the scroll bars stay Dark if/when reverting to original colors until MC is restarted.
57
Beta Releases / Re: v10.0 b2725
« on: September 19, 2020, 13:16:07 »Yes I notice that the Entire Row QuickLaunch bar was not created.. It will be fixed in a new release today
Thanks a lot Mathias
58
Beta Releases / v10.0 b2725
« on: September 18, 2020, 15:17:20 »
Just updated to this & lost my custom toolbar space. (I'd added stuff below the drives/Docs etc toolbar).
Any way to recover that extra space?
Can't seem to see how to do it. ...or am I half asleep & have forgotten how to do it?
I tried reloading my saved layout config without effect.
I can add back the custom commands but this tool area won't move from the end of the input cmd/path field.
Any way to recover that extra space?
Can't seem to see how to do it. ...or am I half asleep & have forgotten how to do it?
I tried reloading my saved layout config without effect.
I can add back the custom commands but this tool area won't move from the end of the input cmd/path field.
59
Support and Feedback / Re: Regex backreference in MultiRename?
« on: July 24, 2020, 13:06:53 »
Thanks Mathias.
I'll see what I can do with scripting
OT
In the new Find Pane (RES #) are you planning to make scripted buttons accessible for the found items?
I was thinking that it would be nice to be able to rename items via script from the RES pane, eg Name as Folder for items found in sub-folders etc.
I'll see what I can do with scripting
OT
In the new Find Pane (RES #) are you planning to make scripted buttons accessible for the found items?
I was thinking that it would be nice to be able to rename items via script from the RES pane, eg Name as Folder for items found in sub-folders etc.
60
Support and Feedback / Regex backreference in MultiRename?
« on: July 23, 2020, 16:59:14 »
I'm wondering if I should be able to use a backreference in MR?
eg to change S27 to Session 27
I've tried \1 in a variety of places vs the "" & it won't call it, only giving bad chars warning in the rename preview pane.
The ECMA REGEX script syntax linked to elsewhere says
\int |backreference |the result of the submatch whose opening parenthesis is the int-th (int shall begin by a digit other than 0).
(subpattern) |Group |Creates a backreference.
(?:subpattern) |Passive group |Does not create a backreference.
eg to change S27 to Session 27
Code: [Select]
(S\d+)|" - Session "\1I've tried \1 in a variety of places vs the "" & it won't call it, only giving bad chars warning in the rename preview pane.
The ECMA REGEX script syntax linked to elsewhere says
\int |backreference |the result of the submatch whose opening parenthesis is the int-th (int shall begin by a digit other than 0).
(subpattern) |Group |Creates a backreference.
(?:subpattern) |Passive group |Does not create a backreference.
61
Support and Feedback / Re: file search using timestamp
« on: April 15, 2020, 13:59:40 »
Great
Thanks for your efforts.
Thanks for your efforts.
62
Support and Feedback / Re: file search using timestamp
« on: April 14, 2020, 12:33:19 »
OK, thanks Mathias
63
Support and Feedback / file search using timestamp
« on: April 11, 2020, 16:23:48 »
MC 9.6.1 b2582 x64 Win10
I'm puzzled by the result I got today using search>advanced>time.
I specified *.* on anything written since 1500, I got 0 hits.
I then tried 1400 & the files appeared.
The timestamps of the files was 1502+ so I don't understand why it needed any adjustment below 1500 to find them. (1450-59 didn't work either).
I was sure that the sensitivity used to be seconds - or am I doing it wrong?
I'm puzzled by the result I got today using search>advanced>time.
I specified *.* on anything written since 1500, I got 0 hits.
I then tried 1400 & the files appeared.
The timestamps of the files was 1502+ so I don't understand why it needed any adjustment below 1500 to find them. (1450-59 didn't work either).
I was sure that the sensitivity used to be seconds - or am I doing it wrong?
64
Beta Releases / Re: Version 9.5
« on: January 01, 2020, 11:03:37 »
Thanks for the update Mathias
Happy New Year.
Happy New Year.
65
Support and Feedback / Re: Is there a ${focusfilepath} alternative that works for multiple selected files?
« on: November 23, 2019, 16:41:02 »
I think in this instance it is the fact that "${focusfilepath}" is for a single item in scope, so you need to tell it to recurse the selection for an array of entries.
You could probably script a button then drop the files onto it with MS, maybe button +custom commands (eg MC.Explorer.Selection.Select) will do it.
You could probably script a button then drop the files onto it with MS, maybe button +custom commands (eg MC.Explorer.Selection.Select) will do it.
66
Support and Feedback / Re: Button Editor: Create New Text File
« on: November 23, 2019, 16:22:15 »
Shift+F4 brings up a notepad instance.
I think you could script it or use the custom commands feature in the button editor with MC/edit/ etc
I think you could script it or use the custom commands feature in the button editor with MC/edit/ etc
67
Beta Releases / Re: Multi Commander 9.1 **BETA**
« on: August 18, 2019, 14:06:43 »
Thanks Mathias, I may have been asleep at the back of the class when you implemented that.
68
Beta Releases / Re: Multi Commander 9.1 **BETA**
« on: August 16, 2019, 22:23:08 »wo = DärBeta Download wo?
-----------------------------------
Sorry if this has been answered already but what is this new icon (attached pic)? Took me a while to notice it
69
Support and Feedback / Re: MultiCommander v8.9 BETA
« on: July 28, 2019, 13:43:23 »
Sorry Mathias I'm a bit slow coming back to reply.
CTD = Crash To Desktop
...& then crash reporter opens, I did send the reports in a few times but as I was experimenting/trying to debug with it I didn't send 0000s
The MC updates didn't solve it, it was still happening with b2531, then I remembered that if the script had become corrupt, a plain text reformat of the script might solve it & it did.
CTD = Crash To Desktop
...& then crash reporter opens, I did send the reports in a few times but as I was experimenting/trying to debug with it I didn't send 0000s
The MC updates didn't solve it, it was still happening with b2531, then I remembered that if the script had become corrupt, a plain text reformat of the script might solve it & it did.
70
Support and Feedback / Re: MultiCommander v8.9 BETA
« on: July 25, 2019, 15:34:01 »
Still getting CTDs with that script so I decided to copy out the button script to a text-only editor & delete the button contents & save the new state with 'update'.
Copied the plain text back to the button, saved/updated & it's working again!
+ When copied from the text editor to the MSDebugger it also now works perfectly.
Some weird invisible corruption able to crash MC & MSdebug I guess! 
Copied the plain text back to the button, saved/updated & it's working again!
+ When copied from the text editor to the MSDebugger it also now works perfectly.
Some weird invisible corruption able to crash MC & MSdebug I guess!
71
Support and Feedback / Re: MultiCommander v8.9 BETA
« on: July 16, 2019, 16:22:42 »
Using latest build 8.9 b2525 W10 x64 I'm still getting CTD if I run that script.
I tried with MSdebugger but no info is revealed.
I tried with MSdebugger but no info is revealed.
72
Support and Feedback / Re: MultiCommander v8.9 BETA
« on: June 05, 2019, 12:57:10 »
pncdaspropagandas I can see that is what it should do, so I am wondering how it avoids doing it & selects a pdf instead.....
73
Support and Feedback / Re: Another thumbnail post ... sorry ...
« on: May 30, 2019, 14:25:04 »
Recent Win10 updates have broken some things in MC.
This might be one of those things.
I tend to stick to details view 90% of the time but IIRC I had a thumbnail issue a little while ago.
Using MC 8.9 b2520 beta x64, thumbnails work & this Win10 is fully updated.
This might be one of those things.
I tend to stick to details view 90% of the time but IIRC I had a thumbnail issue a little while ago.
Using MC 8.9 b2520 beta x64, thumbnails work & this Win10 is fully updated.
74
Support and Feedback / Re: MultiCommander v8.9 BETA
« on: May 30, 2019, 14:22:09 »
I have had a few moments of scratching my head with the script so I too am glad to know I'm not alone pncdaspropagandas
I just tried your script on a dir with varied files - zip, rar, 7z + epub & pdf.
The debugger lists the last file - a .pdf - as soon as it reads the directory, lists it as being the array (see pic) & then ends on the next step.
Why does it jump to the .pdf instead of the actual archives...?
On a dir with nothing but a single rar it ends with 0 instances found. (array size = 0)
So something is definitely weird.
I just tried your script on a dir with varied files - zip, rar, 7z + epub & pdf.
The debugger lists the last file - a .pdf - as soon as it reads the directory, lists it as being the array (see pic) & then ends on the next step.
Why does it jump to the .pdf instead of the actual archives...?
On a dir with nothing but a single rar it ends with 0 instances found. (array size = 0)
So something is definitely weird.
75
Support and Feedback / Re: MultiCommander v8.9 BETA
« on: May 22, 2019, 14:32:56 »
Sorry Mathias. Thanks for hiding it elsewhere
This script/button has been used since c.2014 & has started misbehaving since beta 8.9.
The script crashes MC @
For some reason I didn't run it in the debugger until now
I noticed that removing the last line
I'll have another look at it as I assume that you haven't had any other instances of this occurring.
This script/button has been used since c.2014 & has started misbehaving since beta 8.9.
The script crashes MC @
Code: [Select]
UnpackFile( $zip, $root, "*.*" , "OVERWRITEALL, USEEXISTINGQUEUE" );For some reason I didn't run it in the debugger until now
I noticed that removing the last line
Code: [Select]
MC.RunCmd ID="ExplorerPanel.41075"makes no difference.I'll have another look at it as I assume that you haven't had any other instances of this occurring.