1
Support and Feedback / Re: Error 4000
« on: September 27, 2013, 19:14:58 »
I agree, however there should be a message instead of error 4000. 
News:
MultiCommander v14.2 is released!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
Pages: [1]
2
Support and Feedback / Re: Error 4000
« on: September 27, 2013, 17:59:51 »
I tried the following to understand the problem:
then created a file aaaaaaa.txt on that directory. These seem to be the max length for both types on command prompt.
If I try to rename aaaaaaa.txt to aaaaaaab.txt on command prompt it gives an error. If I try on Windows Explorer it doesn't even allow me to enter more characters. On MC I can rename to a larger name and the name is visible on Windows Explorer and Command Prompt but I cannot rename it anymore unless I use MC.
If I delete to the recycle bin it gives error 4000 and if I try do delete without the recycle bin MC deletes it. However if I assign the hidden attribute and try do delete it I get again error 4000.
Code: [Select]
D:\>mkdir aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaathen created a file aaaaaaa.txt on that directory. These seem to be the max length for both types on command prompt.
If I try to rename aaaaaaa.txt to aaaaaaab.txt on command prompt it gives an error. If I try on Windows Explorer it doesn't even allow me to enter more characters. On MC I can rename to a larger name and the name is visible on Windows Explorer and Command Prompt but I cannot rename it anymore unless I use MC.
If I delete to the recycle bin it gives error 4000 and if I try do delete without the recycle bin MC deletes it. However if I assign the hidden attribute and try do delete it I get again error 4000.
3
Support and Feedback / Re: Error 4000
« on: September 27, 2013, 14:33:49 »
I'm on windows 7 professional 64 bits.
The source is an windows dynamic volume made of 2 internal hard disks of 2TB.
The target is a portable drive, usb 3.0, 2TB, 2,5". After retrying the error appears on another file.
My target directory has a bigger name than my source directory and I'm also having trouble with some files that MC doesn't copy and show no error message and if I try with windows explorer it says that the destination path is too big. But if I rename the source file name and add one character it moves the file with no error on MC.
Only one time I saw a popup from MC that said the file name would be too big and I've chosen the last option (large path).
The source is an windows dynamic volume made of 2 internal hard disks of 2TB.
The target is a portable drive, usb 3.0, 2TB, 2,5". After retrying the error appears on another file.
My target directory has a bigger name than my source directory and I'm also having trouble with some files that MC doesn't copy and show no error message and if I try with windows explorer it says that the destination path is too big. But if I rename the source file name and add one character it moves the file with no error on MC.
Code: [Select]
2013-09-27 12:09:17.708 Start FileOperation (Copy/Move/Delete) Settings
2013-09-27 12:09:17.708 '-- Chunk size : 262144
2013-09-27 12:09:17.708 '-- Buffer size : 262144
2013-09-27 12:09:17.708 '-- Read Flags : 0x0
2013-09-27 12:09:17.708 '-- Write Flags : 0x0
2013-09-27 12:09:17.708 '-- Flags : 0xe00202
2013-09-27 12:09:17.766 Allocating Buffers (Chunks = 1 , Chunks size = 262144 Bytes , Buffer size = 262144 Bytes)
2013-09-27 12:09:17.766 Source file does not exists. Skipping : D:\Backup\Backup1\Backup\TIBETE\Users\Sofia\Anestesia\Artigos e afins\Simuladores e Valencia\Valencia-Ventilacao Mecanica\BIBLIOGRAFÍA TALLERES\TALLER 12. Ventilación de Protección Pulmonar. Reclutamiento Alveolar\Tomographic Study of the Inflection Points.pdf
2013-09-27 12:09:17.766 Skip request of file operations found.
2013-09-27 12:09:23.123 Renamed file : "D:\Backup\Backup1\Backup\TIBETE\Users\Sofia\Anestesia\Artigos e afins\Simuladores e Valencia\Valencia-Ventilacao Mecanica\BIBLIOGRAFÍA TALLERES\TALLER 12. Ventilación de Protección Pulmonar. Reclutamiento Alveolar\Tomographic Study of the Inflection Points.pdf" -> "D:\Backup\Backup1\Backup\TIBETE\Users\Sofia\Anestesia\Artigos e afins\Simuladores e Valencia\Valencia-Ventilacao Mecanica\BIBLIOGRAFÍA TALLERES\TALLER 12. Ventilación de Protección Pulmonar. Reclutamiento Alveolar\Tomographic Study of the Inflection Points1.pdf"
2013-09-27 12:09:24.520 FileOperationDlg - AutoDetect RW Stratergy - "Normal, Same disk"
2013-09-27 12:09:25.549 Start FileOperation (Copy/Move/Delete) Settings
2013-09-27 12:09:25.549 '-- Chunk size : 262144
2013-09-27 12:09:25.549 '-- Buffer size : 262144
2013-09-27 12:09:25.549 '-- Read Flags : 0x0
2013-09-27 12:09:25.549 '-- Write Flags : 0x0
2013-09-27 12:09:25.549 '-- Flags : 0xe00202
2013-09-27 12:09:25.603 Allocating Buffers (Chunks = 1 , Chunks size = 262144 Bytes , Buffer size = 262144 Bytes)
2013-09-27 12:09:25.603 Source and target of MOVE operation is on DIFFERENT disks/volumes. So do a Copy and then Delete.
2013-09-27 12:09:25.603 Prepare Write - Create new file on target. : "S:\Backup\nxtdesktop\Backup\Backup1\Backup\TIBETE\Users\Sofia\Anestesia\Artigos e afins\Simuladores e Valencia\Valencia-Ventilacao Mecanica\BIBLIOGRAFÍA TALLERES\TALLER 12. Ventilación de Protección Pulmonar. Reclutamiento Alveolar\Tomographic Study of the Inflection Points1.pdf"
2013-09-27 12:09:26.074 Copy file using synchronous copy mode.
2013-09-27 12:09:26.076 Copied : "D:\Backup\Backup1\Backup\TIBETE\Users\Sofia\Anestesia\Artigos e afins\Simuladores e Valencia\Valencia-Ventilacao Mecanica\BIBLIOGRAFÍA TALLERES\TALLER 12. Ventilación de Protección Pulmonar. Reclutamiento Alveolar\Tomographic Study of the Inflection Points1.pdf" => "S:\Backup\nxtdesktop\Backup\Backup1\Backup\TIBETE\Users\Sofia\Anestesia\Artigos e afins\Simuladores e Valencia\Valencia-Ventilacao Mecanica\BIBLIOGRAFÍA TALLERES\TALLER 12. Ventilación de Protección Pulmonar. Reclutamiento Alveolar\Tomographic Study of the Inflection Points1.pdf" - 206923 bytes in 1ms - Average Speed : 206923000 bytes/sec (197,3 MB/sec) Read data time 1ms (197,3 MB/sec), Write data time 1ms (197,3 MB/sec)Only one time I saw a popup from MC that said the file name would be too big and I've chosen the last option (large path).
4
Support and Feedback / Re: Error 4000
« on: September 27, 2013, 13:26:16 »
On version 3.5.1 (1519) 64 bits, got the same:
Code: [Select]
2013-09-27 11:21:21.682 Source and target of MOVE operation is on DIFFERENT disks/volumes. So do a Copy and then Delete.
2013-09-27 11:21:21.682 CMoveOperation::DeleteProcessedFolders
2013-09-27 11:21:21.682 Prepare Write - Create new file on target. : "S:\Backup\nxtdesktop\Backup\Backup1\Backup\TIBETE\Users\Sofia\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\ZYGFS5Z2\L4CAU297HWCAU0Y264CAKNE7XCCAL0HYD3CA97XKBHCAJ27LXGCA06AI5TCA4MTBMICA1AJJSZCAA7S6QICAJ2GZZJCAYMFDDCCAOCBYSOCAJBXH4ICA4OIMLQCAYW1GV1CA7LCH08CAG76X93CAV2LD9K.txt"
2013-09-27 11:21:21.685 Prepare Copy - Asynchronous mode enabled.
2013-09-27 11:21:21.701 [2884] Wait for WriteThread to finish and pause.
2013-09-27 11:21:21.701 [2884] WriteThread is now paused.
2013-09-27 11:21:21.701 Copied : "D:\Backup\Backup1\Backup\TIBETE\Users\Sofia\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\ZYGFS5Z2\L4CAU297HWCAU0Y264CAKNE7XCCAL0HYD3CA97XKBHCAJ27LXGCA06AI5TCA4MTBMICA1AJJSZCAA7S6QICAJ2GZZJCAYMFDDCCAOCBYSOCAJBXH4ICA4OIMLQCAYW1GV1CA7LCH08CAG76X93CAV2LD9K.txt" => "S:\Backup\nxtdesktop\Backup\Backup1\Backup\TIBETE\Users\Sofia\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\ZYGFS5Z2\L4CAU297HWCAU0Y264CAKNE7XCCAL0HYD3CA97XKBHCAJ27LXGCA06AI5TCA4MTBMICA1AJJSZCAA7S6QICAJ2GZZJCAYMFDDCCAOCBYSOCAJBXH4ICA4OIMLQCAYW1GV1CA7LCH08CAG76X93CAV2LD9K.txt" - 512 bytes in 16ms - Average Speed : 32000 bytes/sec (31,3 KB/sec) Read data time 1ms (500,0 KB/sec), Write data time 1ms (500,0 KB/sec)
2013-09-27 11:21:21.701 Local file was written to using NoSystemCache - Fixing Filesize : "\\?\S:\Backup\nxtdesktop\Backup\Backup1\Backup\TIBETE\Users\Sofia\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\ZYGFS5Z2\L4CAU297HWCAU0Y264CAKNE7XCCAL0HYD3CA97XKBHCAJ27LXGCA06AI5TCA4MTBMICA1AJJSZCAA7S6QICAJ2GZZJCAYMFDDCCAOCBYSOCAJBXH4ICA4OIMLQCAYW1GV1CA7LCH08CAG76X93CAV2LD9K.txt"
2013-09-27 11:21:21.704 Current file size : "512", Bytes past EOF : 487
2013-09-27 11:21:21.719 RemoveAttribute (0x4 and 0x2 from 0x20 = 0x020)
2013-09-27 11:21:21.719 Failed to remove attribute - Unknown error
2013-09-27 11:21:21.719 File Operations error : 4000
2013-09-27 11:21:21.721 Show Error Dialog from own thread
2013-09-27 11:21:27.320 Error Dialog Result : 0x1 , StepFlags : 0x800001
2013-09-27 11:21:27.320 Abort file operations request.
2013-09-27 11:21:27.320 Abort file operations request.
5
Support and Feedback / Re: Error 4000
« on: September 27, 2013, 13:18:15 »
From version 1500 i can still see on the log file:
Failed to remove attribute - Unknown error. When retrying it asks me to replace the file and it continues.
I'll try with the beta version.
Code: [Select]
2013-09-27 11:10:23.699 Prepare Write - Create new file on target. : "S:\Backup\nxtdesktop\Backup\Backup1\Backup\TIBETE\Users\Sofia\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\ZYGFS5Z2\4CCAZMS63LCAR3NS27CAA96AW6CAW6TYFJCAGUZWXLCAPBEQJ1CA5CMMOOCAHIF3NMCA48BU08CA1TP2TLCAUW5NMECA1RL2QCCAC3G1ZLCAFD7KOXCAQEVV8UCAQP3ZATCATFX71SCA7H8AXQCAZ2H43V.txt"
2013-09-27 11:10:23.703 Prepare Copy - Asyncrone mode enabled.
2013-09-27 11:10:23.719 [7612] Wait for WriteThread to finish and pause.
2013-09-27 11:10:23.719 [7612] WriteThread is now paused.
2013-09-27 11:10:23.719 Copied : "D:\Backup\Backup1\Backup\TIBETE\Users\Sofia\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\ZYGFS5Z2\4CCAZMS63LCAR3NS27CAA96AW6CAW6TYFJCAGUZWXLCAPBEQJ1CA5CMMOOCAHIF3NMCA48BU08CA1TP2TLCAUW5NMECA1RL2QCCAC3G1ZLCAFD7KOXCAQEVV8UCAQP3ZATCATFX71SCA7H8AXQCAZ2H43V.txt" => "S:\Backup\nxtdesktop\Backup\Backup1\Backup\TIBETE\Users\Sofia\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\ZYGFS5Z2\4CCAZMS63LCAR3NS27CAA96AW6CAW6TYFJCAGUZWXLCAPBEQJ1CA5CMMOOCAHIF3NMCA48BU08CA1TP2TLCAUW5NMECA1RL2QCCAC3G1ZLCAFD7KOXCAQEVV8UCAQP3ZATCATFX71SCA7H8AXQCAZ2H43V.txt" - 512 bytes in 15ms - Average Speed : 34133 bytes/sec (33,3 KB/sec)
2013-09-27 11:10:23.719 Local file was written to using NoSystemCache - Fixing Filesize : "\\?\S:\Backup\nxtdesktop\Backup\Backup1\Backup\TIBETE\Users\Sofia\AppData\Local\Microsoft\Windows\Temporary Internet Files\Low\Content.IE5\ZYGFS5Z2\4CCAZMS63LCAR3NS27CAA96AW6CAW6TYFJCAGUZWXLCAPBEQJ1CA5CMMOOCAHIF3NMCA48BU08CA1TP2TLCAUW5NMECA1RL2QCCAC3G1ZLCAFD7KOXCAQEVV8UCAQP3ZATCATFX71SCA7H8AXQCAZ2H43V.txt"
2013-09-27 11:10:23.723 Current file size : "512", Bytes past EOF : 487
2013-09-27 11:10:23.726 RemoveAttribute (0x4 and 0x2 from 0x20 = 0x020)
2013-09-27 11:10:23.726 Failed to remove attribute - Unknown error
2013-09-27 11:10:23.726 File Operations error : 4000
2013-09-27 11:10:23.728 Show Error Dialog from own thread
2013-09-27 11:10:28.787 Error Dialog Result : 0x1 , StepFlags : 0x800001
2013-09-27 11:10:28.788 Abort file operations request.
2013-09-27 11:10:28.788 Abort file operations request.Failed to remove attribute - Unknown error. When retrying it asks me to replace the file and it continues.
I'll try with the beta version.
6
Support and Feedback / Re: Error 4000
« on: September 27, 2013, 12:25:21 »
I'm moving a large amount of files and data between my desktop's internal disk and my usb portable drive and I'm also getting error 4000. After aborting the error window I can resume moving the files without errors but after some time I get the same error. I'm on version 3.5 (1500) 64 bits windows 7.
Pages: [1]