Messages

151

Support and Feedback / Re: Unknown error: 27

« on: August 29, 2019, 13:35:26 »

Assuming your event log error was Event ID 51, there are several possibilities:

• Your device driver is outdated or corrupt
• The drive is failing
• The drive was unplugged without being "safely" removed
• The drive is very low on free space

Some things to look into...

Edii:  Also run chkdsk
 
 
 

152

Beta Releases / Re: Multi Commander 9.1 **BETA**

« on: August 20, 2019, 11:12:43 »

Looks like I forgot that, Didn't think people actually used that hehe

I'm a keyboard-only user, so I like to have a  "minimal chrome"

153

Beta Releases / Re: Multi Commander 9.1 **BETA**

« on: August 19, 2019, 17:18:12 »

There is no option under Configuration -> Explorer Panel Settings -> Layout to hide/show the new icon...?

154

Feature Requests and Suggestions / Re: MultiDataViewer mouse scrolling is reversed

« on: August 15, 2019, 10:56:25 »

@Anti-Bacterial, for what it's worth, I cannot reproduce this problem either: in fact I have never seen it in any program.

It has to be an issue with a setting on your PC or with your mouse settings.

Do you have any accessibility options enabled (even accidentally) in Windows?

155

Beta Releases / Re: Multi Commander 9.1 **BETA**

« on: August 12, 2019, 18:10:00 »

Thanks for the new Beta, Mathias

Starting to test now...

156

Support and Feedback / Re: "lynx-like" movement (left-right arrows) in MultiCommander

« on: August 07, 2019, 16:36:53 »

I could not find any (built-in) way to do this.

Can you explain why Left Arrow is "faster" than Backspace and Right Arrow is "faster" than Enter (each is one keypress) ?

157

Support and Feedback / Re: Another thumbnail post ... sorry ...

« on: July 25, 2019, 11:59:17 »

Thanks, will try later today.
Your opinion?
Windows or MC issue?
Bob

Fairly sure it's a Windows issue.

158

Support and Feedback / Re: Another thumbnail post ... sorry ...

« on: July 24, 2019, 17:45:55 »

Bugger 

If you're game, I have one last thing to try (if you're not - I understand - you've been very patient).

Step 1: create a restore point with a meaningful name (important)
Step 2: open a command prompt as Administrator
Step 3: run the following command:   DISM /Online /Cleanup-Image /RestoreHealth
        Wait for it to finish. It may take several minutes (even appearing to hang), but it will finish.
        If it finds any corruption, it will contact the Microsoft servers and install anything it needs to
Step 4: Reboot and re-test.

If anything goes wrong - very unlikely - recover from your restore point.

This is my last shot, so good luck!

159

Support and Feedback / Re: Another thumbnail post ... sorry ...

« on: July 24, 2019, 11:35:16 »

Hi Bob.

Looks like you had at least one Windows Update fail at some point (and the backup store is corrupt, so cannot be repaired).

When you ran Disk Cleanup (as suggested by @Anti-Bacterial) did you make sure that both Thumbnails and Windows Update Cleanup were checked?  If not, please run it again with (at least) those two options checked & reboot afterwards.

After a reboot, please check for windows updates and apply any that are found.  Reboot afterwards.

Check your thumbnail issue and let us know how you get on.

160

Feature Requests and Suggestions / Re: Button to collapse the tree

« on: July 23, 2019, 18:49:30 »

Do you use MC in Commander Style or Explorer Style?

161

Support and Feedback / Re: Another thumbnail post ... sorry ...

« on: July 23, 2019, 10:35:05 »

Bob,

if you run the first and second commands I posted, you will end up with a file at C:\sfcdetails.txt which is a filtered CBS Log with only the relevant lines from SFC.

This will be small enough to attach to a reply here.

162

Support and Feedback / Re: Another thumbnail post ... sorry ...

« on: July 18, 2019, 13:10:03 »

You could try this - it won't hurt as the thumbnail cache will simply rebuild itself as you browse files.  Might be worth a try.

Good catch @Anti-Bacterial: I should have thought of that (but then I am very old  )

163

Support and Feedback / Re: Another thumbnail post ... sorry ...

« on: July 16, 2019, 13:15:09 »

From one old fart to another...

Run the following 3 lines exactly from a cmd prompt (wait for each one to finish before typing the next):

Code: [Select]

sfc.exe /scannow
findstr /c:"[SR]" %windir%\logs\cbs\cbs.log > "C:\sfcdetails.txt"
start "" /MAX "C:\sfcdetails.txt"

Check the output for any errors or repairs that were necessary.

Reboot & see if anything has changed (for the better!).

HTH

164

Support and Feedback / Re: Another thumbnail post ... sorry ...

« on: July 15, 2019, 19:16:11 »

Hi Bob.

Have you tried running SFC to see if it lists any problems?

Are you, by any chance, using ACDSee image viewer?

165

Support and Feedback / Re: Explorer panel sorting with files first

« on: July 13, 2019, 11:39:16 »

Sorry - I misread your post.

AFAIK there is no way in MC to sort files before folders.

166

Support and Feedback / Re: Explorer panel sorting with files first

« on: July 12, 2019, 15:51:48 »

Menu -> Configuration -> Explorer Panel Settings -> Display tab -> Sorting and Columns section: uncheck Sort file and Folders separately, Folders first.

Any better?

167

Support and Feedback / Re: How change editor in multicommander from notepad to notepad++?

« on: July 04, 2019, 12:20:34 »

Menu -> Configuration -> File Type Setup... -> Editors tab.

168

Beta Releases / Re: MultiCommander v8.9 BETA

« on: June 26, 2019, 10:40:52 »

Excellent - thanks for the update

169

Beta Releases / Re: MultiCommander v8.9 BETA

« on: June 25, 2019, 19:23:01 »

Mathias,  do you have a change log for 8.9 build 2523?

Bump?  Mathias - speak to me

170

Support and Feedback / Re: help!

« on: June 20, 2019, 13:52:45 »

The following link may help.  The solution is for the "Q-Dir" file manager, but the principle should be the same.

https://superuser.com/questions/241442/how-would-i-replace-default-windows-explorer-with-an-alternative-one-say-q-dir

Disclaimer:  I have not tried this.


Edit: spelling error

171

Support and Feedback / Re: How opening .jar file

« on: June 13, 2019, 17:30:52 »

Normally, .jar files do not contain .exe executable files.  They usually contain Java class files (among others).

172

Beta Releases / Re: MultiCommander v8.9 BETA

« on: June 12, 2019, 15:18:46 »

Mathias,  do you have a change log for 8.9 build 2523?

173

Feature Requests and Suggestions / Re: Save the Filter Status to Tab sessions

« on: May 30, 2019, 11:09:26 »

Thanks 

174

Feature Requests and Suggestions / Re: Save the Filter Status to Tab sessions

« on: May 29, 2019, 15:19:51 »

So ?
View Filter, the Filter box at the bottom right in each Exploer Panel, should remember its value between restarts ?
I will check if that is possible

Mathias, if you do implement this, please make it user-configurable:  I, for one, would not want persistent filters.

175

Support and Feedback / Re: Unpacking to a protected Folder works not because the Adminmode go not on

« on: May 28, 2019, 15:00:43 »

OK.  I understand the problem now.  But I have never seen it happen.

Maybe because I user"Explorer Style" and not "Commander Style".