Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Mathias (Author)

Pages: 1 [2] 3 4 5 6 ... 171
26
Beta Releases / Re: v13.5 Issues
« on: January 26, 2024, 15:37:41 »
Should be fixed in 2983 that is now published.

27
Beta Releases / Re: Re: v13.5 Issues
« on: January 26, 2024, 15:07:28 »
Not exactly the right thread but using MC 13.5 b2982 x64 W11 I'm seeing MC refuse to open .rars.

Otherwise so far so good ;)
Thanks for your continuing work Mathias

Ahh F...!!!  I know what I missed.. I will fix and re-Release..

28
I reassigned Rename from default Shift+F6 to F2. At the first launch after update to 13.4 both shortcuts stopped working. And AFAIR Rename item disappeared from the keyboard customization dialog (but I'm not sure). But I was unable to find there neither F2 nor Shift+F6. After restart everything came back to normal state.

Sound like it is a race condition.. file is already loaded into Windows cache the second time and the loading goes faster, so it able to load the file before it setups the commands..

29
Beta Releases / Re: v13.4 Beta
« on: January 25, 2024, 20:22:47 »
I don't want to create new topic...

Hang on exit still an issue, I guess maybe 4 of 5 exits leave the window hanging & unresponsive.

For me it still exists. And it seemingly doesn't depend on antivirus. IIRC it started happening since v13

The dumps I seen about it, then MC is waiting for windows to close down file change monitoring on some path. So it might be that it is some path to some special locations that cause an issue ?
Not sure if it hangs in same place for you.  But I haven't seen anything other reason.. yet..

I have never been able to reproduce it my self. So There must be something special with some peoples system that make Windows take long time unregister folders for change monitoring..


30
Is it all keys or some ?
I have not been able to reproduce it.  But it loads keys and other things parallel during start up so it can be a race condition.. it can be that some commands are setup before all customized keys are finished loaded. I will move around so customized keys are loaded earlier for the next release.

31
Support and Feedback / Re: right click menu issue
« on: January 07, 2024, 09:48:01 »
Not much for MC to do about that. MC do not have any control of the standard windows option. They are all handled by Windows.
It is up the shell extension that adds them to the menu to handle the execution of the command. and some shell extension require that the calling app is a Windows Shell window. and MC is not built on top of that.


32
Support and Feedback / Re: Disable "Copy dropped files" dialog
« on: January 06, 2024, 09:21:17 »
Maybe it is not files you are dragging. Some program send drag and drop data as special things that are not handled as files.. drops like that are handled different and is not a normal file copy

33
Support and Feedback / Re: Disable "Copy dropped files" dialog
« on: January 06, 2024, 00:37:30 »
I cannot replicate that.. I works when I try it.
Sure you have uncheck the option in drag and drop settings ?

34
Support and Feedback / Re: Disable "Copy dropped files" dialog
« on: January 05, 2024, 13:50:39 »
Look at

Core Settings > FileSystem (tab) > Drag an Drop fileoperation

35
Support and Feedback / Re: How to disable preview?
« on: December 22, 2023, 09:48:56 »
It is NOT ON by default.. you have to click icon on toolbar or press hot key to activate it. and it will not stay on between restarts.
The data preview is not something you use 100%.  You click to active it. when you need it.
And you can clear the hotkey mapping of you use that hotkey for activating it for other things
So I don't understand what issue you have with it since it not enabled by default.

36
Beta Releases / v13.4 Beta
« on: December 15, 2023, 13:25:16 »
v13.4 Beta Release

+32 Changes
-- 2974 ( 22-Dec-2023 )
 FIXED - Restored Tab are now opening in the correct tab location

-- 2973 ( 22-Dec-2023 )
 ADDED - Support for restoring closed tab. Right click on Tab area to get popup list
 CHANGE- Code clean up and code restructre, (prepare for future new features)
 FIXED - 2 Stability issue

-- 2971 ( 15-Dec-2023 )
 CHANGE- LogView (Ctrl+L) will now be in unicode so Chinese, Japanese characters are show correctly
 CHANGE- Logfile will now write in unicode so Chinese, Japanese are written correctly
 CHANGE- Upgrade of 3rd party frameworks used
 CHANGE- Lot of code cleanup
 FIXED - View file from password protected zip now works again
 FIXED - 7 Stability issues

 

37
Support and Feedback / Re: right menu lost "new text doc"
« on: December 15, 2023, 09:23:31 »
Look like Microsoft change how some items are registered. On my Win11 it works. I have not had time to dig into what exactly is different on some system.

However a faster way to create a new empty file is to write "cf <filename>" in the command line field. A empty file with that name is then created

Also searching online you will find ways to add it the Win10 way.

38
Support and Feedback / Re: Optimization in List view
« on: December 12, 2023, 13:21:04 »
It is important to quckly see date, time, size in the footer of the panel for List view, always in exactly the same spot.
Other older orthodox file managers had this implemented 30 years ago. So there was a use for it. It is not so practical for users to keep changing the view to see what they should see without changing anything.

See, that is how open sourcing would help the project. MC is nice and there is a lot that could be praised about it. But it is the vision of one man. It is what you want, not what people want. Open sourcing would make it (in time, of course) what you want AND what I want AND what others want. And this would bring maturity to the project.

In the upper right side of this forum I see "File Managment For Professionals". So maturity is to be expected from MC. By the way, there is a spelling error in that.

Then use detailed mode. :) it is much better anyway. I never use List view..(maybe why it lack features.. I never use it my self. ;) )
also many other might have had that a long time. But MC also had many things they do not have.

Open source would not help. As I said.. Nobody would contribute a major things that require architectural changes of the code.
Even if there was somebody willing to do it. it would require me LOTS of work do transfer everything to be open source.. and that is time that do not exists

However.... It is actually on the list.. but time is limited and it been pushed down. But some of the architectural changes are now done when Preview handing was added in previous releases so now it higher possibility for it to show up.

And Yes there are many spelling errors I know :)  If I ever get the time I will fix them. Right now the time I can spend on this is very limited.

39
Support and Feedback / Re: Optimization in List view
« on: December 12, 2023, 11:30:00 »
When panel is in List view, it is important to be able to see date, time and size for files under cursor. MC does not do that by default. Can it be configured?
That was detailed mode are for. so currently not there in list view
You can enable hover preview or preview panel, then that info is shown there

40
Support and Feedback / Re: Release 13.3 (2969)
« on: December 12, 2023, 11:27:17 »

Code: [Select]
MC.RestoreConfig FILE=<path>  ONLY_CONFIG  ONLY_USERDATA
MC.BackupConfig FILE=<path>

Optional, not required
ONLY_CONFIG
ONLY_USERDATA

41
Feature Requests and Suggestions / Re: Open Source
« on: December 11, 2023, 23:04:54 »
Just because something is open source does not mean many developers will join.. Most open project does hardly get any external contributors.
Look at DC as you mention.. 90-95% of all commit is from 1 person. 
And then you need to verify everything that people want to contribute. And you loose control and people can fork it and release there own version of it and then there are multiple version out there. and user can trust what version is the offical.
Bad people can easily create a version containing malware, and it will hurt the reputation of the official version.
And the project then would also only be able to use other open source project, limiting in what 3rd party software you can use.  Would require some parts of MC to be rewritten.
Also MC codebase is huge, very few developer would want to spend the time to understand the architecture.

However.... some "parts" from MC is planned to be open.. So I think parts and extensions can be open..

42
Support and Feedback / Re: Search for... can't find any texts.
« on: December 10, 2023, 01:42:43 »
correct , MC do not decode all file format there are. It is too big of a scope. It looks for the file content flat.

43
Support and Feedback / Re: Clear the filter when clicked on a folder?
« on: December 09, 2023, 00:53:15 »
not sure I understand what you mean... but if you right click on the filter button next to the filter field. you got two options if it should remember filter and if it should reset it

44
Beta Releases / Re: v13.3 Beta
« on: December 07, 2023, 14:55:16 »
Thanks for looking at this again Mathias.

Sorry for the misinterpretation of what you needed. 
I've created a dump from 2967.
Still getting 502 when I try to upload :(  so have sent you a link via contact form.

It hangs when trying to stop monitor folders for changes.
MC normally ask windows to tell MC if folder X is changed. When closing MC, MC tells windows to stop doing that for MC and it hangs and Windows do not gives as response.
I reply on your mail with what folder it is.. Maybe it is somethings special with that folder on your system

45
Beta Releases / Re: v13.3 Beta
« on: December 07, 2023, 14:28:14 »
Thanks for looking at this again Mathias.

Sorry for the misinterpretation of what you needed. 
I've created a dump from 2967.
Still getting 502 when I try to upload :(  so have sent you a link via contact form.
Strange I can upload from here.  hmm wierd
You use https://multicommander.com/support/upload  ?

46
Beta Releases / Re: v13.3 Beta
« on: December 06, 2023, 13:57:23 »
No what I meant was that the debug symbols I got did not match.. I think the dump was from a beta version where that did not have saved debug symbols correctly. Had some build issue on my build server.
But if you create a new dump from build 2967, then I should have dbg symbols that are matching.

With correct symbols it will resolve all of the " MultiCommander+0x4d81c7  "to the correct code functions, and I can see where it hangs..

0000000f`7a11d720 00007ff6`0d888ca4     : 00000168`42a56880 0000000f`7a11d710 00007ff6`0d756683 00000168`41291700 : MultiCommander+0x4d81c7
0000000f`7a11d790 00007ff6`0d88b064     : 00000168`42a567f8 00007ff6`0db8d1f0 00000000`00000001 00007ff6`0da93dd0 : MultiCommander+0x4d8ca4
0000000f`7a11d7e0 00007ff6`0d876b4e     : 00000168`42a56858 00000000`00000000 00000168`41295390 00007ff6`0da91a48 : MultiCommander+0x4db064
0000000f`7a11d810 00007ff6`0d66bc90     : 00000000`00000000 00000000`00000000 00000000`00000001 00007ff6`0da438e0 : MultiCommander+0x4c6b4e
0000000f`7a11d840 00007ff6`0d70406f     : 00000000`00000000 00000000`00000001 00000168`41291700 00007ff6`0da5ad88 : MultiCommander+0x2bbc90
0000000f`7a11d870 00007ff6`0d44f4b8     : 00007ff6`0d703e60 0000000f`7a11d9a0 00000000`00000000 00000000`00000000 : MultiCommander+0x35406f

Right now I have no ide where in the code that is..

47
Beta Releases / Re: v13.3 Beta
« on: December 04, 2023, 09:48:51 »
OK. Thanks Mathias.
BTW Did you get the dump I posted? 
I still get 'bad gateway' using the upload link here.
No.. it does not find any matching debug symbols.  What version is that ?. might be that symbols for that version is removed.

48
Beta Releases / Re: v13.3 Beta
« on: December 01, 2023, 14:18:49 »
MC 13.3 b2964 x64 on W11 x64
Just an FYI...
This build has pretty much solved the RMB context menu issues I had.  I did have a few strange instances where it worked fully then stopped, then worked partially but it is currently 100% since I enabled legacy icons for the context menu.

Hang on exit still an issue, I guess maybe 4 of 5 exits leave the window hanging & unresponsive.  It can still always be killed by TM>end task though.

Thanks for your continuing work on my favorite program Mathias :)

I'm not able to recreate any hang on exit.. So I have no idea what can cause it to happen for you.. I must be something that is unique for your setup. against most others..
Problem is to figure out what that can be

49
Beta Releases / Re: pdf preview error with beta build 2964
« on: December 01, 2023, 14:04:59 »
Found the crash report

The Crash is in XCShMain.x64.dll , (  PDF-XChange ) and the crash is because of a "NULL_POINTER_READ", So it is definitely a Bug in their code.

Make sure you have latest version, Searching online I find many user have issues with their pdf preview handler.

50
Beta Releases / Re: pdf preview error with beta build 2964
« on: December 01, 2023, 13:49:41 »
Not able to reproduce that..  But that is also not the windows default pdf viewer.  Have you some 3rd party pdf viewer installed that installed its own preview handler ?

Was the crash report sent ? Did you note what crashId was shown ?

Pages: 1 [2] 3 4 5 6 ... 171