Multi Commander Support Forum
Multi Commander => Support and Feedback => Topic started by: AriesTruong on August 27, 2019, 04:33:28
-
Hi Mathias,
This is steps:
1. Create new 3 user defined commands: Command_1, Command_2, Command_3
2. Create new Root "Security" Menu
3. Create new sub menu in "Sub-Security" menu
4. Add 3 commands from step 1 into "Sub-Security" menu as below:
- Security Menu
- Sub-Security Sub-Menu
- Command_1
- Command_2
- Command_3
5. Restart MC to make sure everything work OK with sub menu and added commands
6. Open "User Defined Command" dialog to delete 1 in 3 commands and close dialog:
Example: delete Command_2 and save then close dialog.
7. Click "Security" menu
As observation: Whole "Sub-Security" menu is removed out "Security" menu.
Workaround for this issue: Open file "UserMenu.xml" and delete menu item. Then open "User Defined Command" dialog to delete.
-
I can't reproduce that. If I delete a command it is still shown but is disabled in the menu.
However there is an issue when going to the menu customization window. that cause that window to crash.
But I don't get any submenus to go missing
-
You meant you assign new command to sub-menu? I also see disabled item if i assign command to 2 submenu of 2 menu then command is disabled in 1 submenu and another submenu is removed out menu.
To reproduce, you should create new structures menu as i added in post 1.
-
I did
created menu with submenu with commands
Menu
> SubMenu -> Command1
Command2
Command3
-
Please see my video for detail from link google
https://drive.google.com/file/d/17HAOt1EU8_8VsJhdEoHwB4hMTR57j4zC/view?usp=sharing (https://drive.google.com/file/d/17HAOt1EU8_8VsJhdEoHwB4hMTR57j4zC/view?usp=sharing)
-
Yes that was what I did.
I do not get it to fail.
I fix the other crash related to this. Might be that it also fixes you issue. Was a kind of memory issue. so it can act different on different system.
-
Yes that was what I did.
I do not get it to fail.
I fix the other crash related to this. Might be that it also fixes you issue. Was a kind of memory issue. so it can act different on different system.
It's strange because I hit this issue on PC at office and at home. Anyway I will check later when you release next beta
Note: I use MC as Portable so it has the same setting.
-
This seems to be similar to a bug I reported long back. I never followed it up because I wasn't using the feature much and also the author couldn't replicate it.
Here's the link http://forum.multicommander.com/forum/index.php/topic,1530.msg5526.html#msg5526 (the first bullet point)
-
Confirm. The issue exists.
===
There's also issue with [Copy] button in the User defined commands dialog. When I press [Copy] new command is created, but some fields are shown empty. E.g. if source command is "Internal command" then copy will show empty fields "Module" and "Command". If source is "Custom commands" then copy will show empty "Command". In fact they are not empty and after saving will be shown correctly, but it's a bit confusing.
-
Hi Mathias,
There are some fan also hit this issue so i re-create video for detail from step create new command.
Please check video again
https://drive.google.com/file/d/17HAOt1EU8_8VsJhdEoHwB4hMTR57j4zC/view?usp=sharing (https://drive.google.com/file/d/17HAOt1EU8_8VsJhdEoHwB4hMTR57j4zC/view?usp=sharing)
-
I cant recreate it, The removed item just becomes a disabled menu items for me.
But as I said I think it is related to the other issue I fixed so check again after next beta
-
This issue is fixed in v9.1 beta b2552