Messages

1

Support and Feedback / Re: Cannot drag and drop emails from foxmail

« on: September 20, 2023, 12:52:04 »

No idea what foxmail is or what it does.. But MC support most drag'n'drop formats.. Don't know what special thing foxmail does that make it not work in MC.. that is strange..
Might be that it is its own special drop format and that they install a extension to windows for it to handle it..

2

Feature Requests and Suggestions / Re: Support bitlocker password-protected drives

« on: September 20, 2023, 12:49:06 »

I don't think it possible to detect that.

3

Support and Feedback / Re: Find Files finds nothing when invoked a second time with a different search

« on: September 19, 2023, 14:49:54 »

I'm not able to reproduce that.. Can you describe step by step on how to reproduce that
Also look in the FileOperations log (Ctrl+L)  there you see what search rules it uses and where it searches

4

Support and Feedback / Re: Non-greedy dot is not supported

« on: September 14, 2023, 09:31:46 »

MC do not have its own regex engine. it is using the reqex engine that is included in C++. the option for the regex engine is set to be ECMA, but I don't know if they are any exception or if you need to write in other way.  What it support and not, I don't know. I got it to work with most pattern I tried but Im no regex expert. I don't understand what your are trying to so with the regex

5

Support and Feedback / Re: Slow speed transfer !!

« on: September 06, 2023, 17:00:14 »

As you see from the MC dialog it is the write speed that is slowing down the process.. Read speed is almost 300mb/s, Windows only show you the averge speed of something, probaboly a combination of both the read and write..

Why you got slow write speed is very hard to say. There are so many layers that the data goes via before they are written that can affect speed.
If you expand the 'copy to ' under advanced you got read/write stratergy,  there you can tweak buffers and chunksizes and if caches should be used or not.
security software may also cause issue, Some do not like unknown application doing file transfer and will do extra scanning of them.

6

Feature Requests and Suggestions / Re: Open Source

« on: September 01, 2023, 15:36:18 »

No..  Why? 

7

Support and Feedback / Re: How to prevent folders from opening when dragging a file

« on: August 31, 2023, 07:56:06 »

Hi Mathias, unfortunately this is impossible for me. I have only one arm.
Too bad!

How is it impossible to NOT hold alt key. you do not to do anything extra for that ?
You wanted to avoid going into subfolders. it only does that if you hold alt key pressed..

I would suggest to skip mouse entirely and only use keyboard.. you can do almost everything faster with keyboard with commander styled setup.. (optimized for kb) and then you only need one hand..

8

Support and Feedback / Re: Wrong calculation of size after adding files/folders to the queue

« on: August 28, 2023, 11:43:00 »

Not been able to repoduce that. File size is check when queued.. If the filesize changes between then and when file is copied, the actual size copied then can be large then expected.

9

Support and Feedback / Re: Disable Paste from Clipboard into Explorer Panel

« on: August 28, 2023, 11:39:35 »

No

10

Support and Feedback / Re: xp version

« on: August 28, 2023, 11:38:33 »

https://multicommander.com/files/updates/MultiCommander_XP_win32_(9.8.0.2600).exe
https://multicommander.com/files/updates/MultiCommander_XP_win32_Portable_(9.8.0.2600).zip
https://multicommander.com/files/updates/MultiCommander_XP_x64_(9.8.0.2600).exe
https://multicommander.com/files/updates/MultiCommander_XP_x64_Portable_(9.8.0.2600).zip

11

Support and Feedback / Re: How to prevent folders from opening when dragging a file

« on: August 28, 2023, 11:31:33 »

That is correct. But unfortunately not in the Explorer window.

In the explorer panel windows (filelist part). The folder you hover over is not auto opened unless you hold ALT key.

12

Support and Feedback / Re: How to disable preview?

« on: August 25, 2023, 18:36:31 »

Just don't enable preview..  Preview has to be enabled to be shown.. (Alt+Q / Shift+Alt+Q), so if you do not enable it. it will not show it

13

Support and Feedback / Re: MC displays multiple copies of files and folders

« on: August 24, 2023, 18:04:13 »

Just press F5/F2 (force refresh)(depending on setup) and it fix it self.. This is an display error only.
It happens very rarly in special situation, often if the filesystem updating a lot at the same time that MC is doing something..  Never been able to recreate it.

14

Support and Feedback / Re: settings

« on: August 24, 2023, 10:01:35 »

Registry

REG:\HKEY_CURRENT_USER\SOFTWARE\MultiCommander\SessionConfig\ShowTipOfTheDay
REG:\HKEY_CURRENT_USER\SOFTWARE\MultiCommander\SessionConfig\AskLanguage   ( can be added to multicommander.xml as   <AskLanguage value="0"/>  under to root config node )

15

Support and Feedback / Re: User Defined Command to go into sub-directory.

« on: August 22, 2023, 19:58:45 »

There are two way depending on how good error handling you want..

1.
You can in the command line field type "cd temp\myfolder" and it will take you to "<currentpath>\temp\myfolder"

But instead of typing that in the commandline field you can automate that with a "Custom Commands" type Command..

Code: [Select]

MC.CmdLineRun CMD="cd Temp\myfolder"

However if path "mtemp\yfolder" does not exists, but temp\ exists, it will go into temp\ anyway.. there is no check if path exists.

2. User defined command of "MultiScript" type

Code: [Select]

@var $currentPath = GetSourcePath();
@var $newPath = $currentPath ^ "Temp\\MyFolder1"

if( FileExists($newPath) == 2 )
{
 MC.Explorer.Goto PATH="{$newPath}" SOURCE
}It will only go to the path if the path exists, else it does nothing.

16

Support and Feedback / Re: Can I stop horizontal scrolling?

« on: August 09, 2023, 10:07:52 »

Hello everyone

I'm quite a newbie to Multi commander.

I like Multi Commander very much but there's one thing that's a bit annoying for me: The horizontal crolling in the folder tree window.

When I try to drag and drop a file to another folder the folder tree scrolls to the right. Sometimes the folder names become unreadable, especially with short folder names. They are simply scrolled away to the left.

Can I stop the horizontal scrolling and how can I do this?

Thank you for your help!

Thomas

I'm not able to recreate this. If you while dragging in folder tree have mouse cursor at the begining / end of the line it will also scroll that way..

17

Support and Feedback / Re: Update the Microsoft store version?

« on: August 03, 2023, 10:18:23 »

'MultiCommander Store Edition' is now updated on Microsoft Store

18

Support and Feedback / Re: Optimization in List view

« on: July 31, 2023, 22:47:28 »

Okay, I thought I'd suggest that by default, in Details view, the left and right keyboard arrows would behave like PageUp and PageDown.
Doesn't that make more sense?

I think it makes more more sense to just press page up and page down.
L/R arrow keys are used in some setup for other things, like enter folders , send folder to other panel.

19

Feature Requests and Suggestions / Re: Better configuration of languages

« on: July 31, 2023, 09:25:03 »

it is generated by the build system.
Removing language files your self and have it automatically update that file is not support.
You have to update that file also your self. But as soon as MC updates, it will overwrite it and you also get the new languages files.
All language files are only 1.6MB

20

Support and Feedback / Re: Optimization in List view

« on: July 30, 2023, 13:26:11 »

What du you want to do with left/right in detailed list mode ?  Arrow left/right works.. But by default maybe not what you want them to work. You can customize it.

21

Feature Requests and Suggestions / Re: Better configuration of languages

« on: July 30, 2023, 13:22:08 »

They are not static. They are read from SupportedLanguages.xml

22

Support and Feedback / Re: Update the Microsoft store version?

« on: July 26, 2023, 07:53:41 »

Store because MS have Changed Things.

My Store App is broken - it dosn't matter.

Matthias, congratulations on new release (and new home).

Will the Microsoft Store version be updated, or is it permanently broken?

many thanks

It is coming. Just want to see so there is no major issue that needs fixing in 13.1, release on app store is a bit of a PITA.. so I will push to app store in around a week unless there are some issue that need fixing first..

23

Support and Feedback / Re: function IsFolder not working with long path in windows 10

« on: July 24, 2023, 16:04:04 »

multi-script function IsFolder https://bit.ly/3pZJ1Uy
seems not working with long path in windows 10

Yes look like the script function is using the wrong internal method, and is not fall backing to retry with UNC path.. I will fix that for next release

It should work if you append "\\?\" before the path..  Window support long path for path using UNC path..   \\?\E:\Temp  instead of E:\Temp

24

Announcements and News / MultiCommander v13.0

« on: July 20, 2023, 13:13:45 »

After a long delay v13 is finally released.

There is not a massive amount of fixes.. The delay is because I have not had so much time to spend on MultiCommander.
It is because I have moved to a new home. And then I needed to renovate and fix that places. And to save money I been doing most of the renovating my self. So most of my free time have gone to that.
But that is soon over, And then I will have more time to spend on MultiCommander again.

http://multicommander.com/downloads

25

Support and Feedback / Re: How to Compress and Copy Files.

« on: July 19, 2023, 23:07:33 »

Sorry. I cant create video..

If you do not even get it to work with portable version with default settings.. Then something is very strange. I don't even think a video would help.
A video would be to launch portable version, then select a file and press copy.

There must be something different with your setup that creates some sort of conflict. Or like I said before what is the other panel showing for path ? maybe it is a virtual / invalid copy target ?