Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.

Messages - Matthias515566

Pages: 1 [2] 3 4 5 6 ... 13
If you use the right mouse button to select files, it will autoscroll. Go to Configuration > Explorer Panel Settings > Mouse Configurations > Right Mouse Button > Click > Select the option "Toggle Selection".

Support and Feedback / Re: How to transfer multi-scripts
« on: July 15, 2023, 20:08:21 »
Copy the folder '....MultiCommander64\Config' from your old portable installation to your new portable installation. Ensure to replace all existing files. Make sure to close MC before starting this process.

Support and Feedback / Re: Network Issue
« on: June 10, 2023, 18:41:51 »
This works for me. I click on 'network', and my network computers are listed. It seems that you might be using an older version of Windows. I suspect there was a bug in the early versions of Windows 10. However, it could also be that your network computers are not in the same workgroup, and are set to 'public' instead of 'private'.

Support and Feedback / Re: Network Issue
« on: June 09, 2023, 22:39:42 »
File> Tab Sessions was made for this.

Support and Feedback / Re: Standby while copying on Windows 11
« on: June 08, 2023, 13:15:48 »
computer to sleep after 5 minutes.
Configure the power button for sleep mode and press that power button when you leave your computer. And remove the pointless energy-saving plan.

Beta Releases / Re: v13.0 **BETA**
« on: May 17, 2023, 23:56:59 »
However, I was merely extracting a single file, and the option was unavailable as it was greyed out.

Beta Releases / Re: v13.0 **BETA**
« on: May 17, 2023, 19:09:45 »
An archive is not being unpacked in the target folder, but rather in a subfolder of the target folder with the same name as the archive. I believe I recall this behavior being different in the past, when I could unpack the contents of the archive directly into the target folder.

Beta Releases / Re: v13.0 **BETA**
« on: May 17, 2023, 18:52:34 »
Have you release notes for 2946? It seems i don't need to update.

Support and Feedback / Re: Simple tree and file pane view
« on: May 07, 2023, 10:43:39 »
However, an easy way to get this one-pane view is to go to View > "Full pane width." You can also use F11. If F11 is not the key for full pane width in your configuration, then go to Configuration > "Keyboard Customization" > Module: "Multicommander Core" > View - "Full Pane Width" and create it. The 2-panel layout is a main feature of MC, and there are reasons why the single panel view cannot be saved.

I need the Button, which is under File, directly on top in the menu bar or a Keyboard shortcut to get the Session-List.

I cannot enable this toolbar. Under View > Toolbars, there is only the Command Line bar. But I guess I don't need this bar anyway.

Is this a new function? I've never seen this before, and I don't have a toolbar with this button. Also, this option is not available in the settings. And I can't find this button. Just pressing Alt+Q enables and disables this function.

Support and Feedback / Re: skip errors in copy operation
« on: April 14, 2023, 14:04:27 »
For such copy operations, the simple copy method is not the right way. You need a synchronizer like Beyond Compare or the synchronization tool from FreeCommander or TotalCommander. MC does not have a synchronization tool. I use Beyond Compare and sometimes the synchronization tools from FreeCommander and TotalCommander.

And for Backup, all these tools are not the right way. I use an old version of Acronis True Image for backups.

Support and Feedback / Re: internal error?
« on: April 08, 2023, 13:22:36 »
MC should not wait for Windows to time out with something. One request should be enough. After that, MC should do its own thing and let the explorer.exe handle the silly stuff. Maybe the best solutuion is:
Code: [Select]
taskkill /IM explorer.exe /F

Support and Feedback / Re: Update the Microsoft store version?
« on: March 28, 2023, 13:01:41 »
Store because MS have Changed Things.
My Store App is broken - it dosn't matter.

Support and Feedback / Re: Multi-Rename Syntax
« on: January 01, 2023, 15:47:34 »
You should create a "Find and Replace - List" with Excel in a Format that u can insert in the sub-window which you find when you click on the three dots button right beside the Add-Button.
Follow this rules, this can all be made with excel.:

Separate each find and replace pair with |
Only one find and replace pair per line
Load - Press F1 to F10
Save - Press F1 to F10 while holding shift key

I use Ctrl+F and Ctrl+N for other funktions. How can i open the favorite-window without the command line bar? Such problems have i olso in other programs. All Keyboard-Shortcuts should be configurable. Ctrl+F is common used for Find and Ctrl+N is common used for a new instance or a new window. Firefox for example need no new instance for a new window.

You get one icon on the taskbar for each instance. But normally Windows stack/group them so you get one on the taskbar and the other when you click on that.
For me they are stacked. unless I disable that settings in Windows..
No. This issue have nothing to do with taskbar icons. This are tray-icons. i have Tray Icons disabled and if the explorer closed and restarted the tray icons are created anyway and take alot of space in my System-tray.

for every instance created. MC is the only program with this behavior. Why?

Support and Feedback / Re: Path in TitleBar?
« on: October 29, 2022, 18:53:31 »
Quote from: Mathias (Author)
I have this on my todo list.
Please do it not or make this optional. Titles are only relevant for Tab Sessions. I create them with a batch File. Here a String Example:
Code: [Select]
Start "Arbeitsplattform" "C:\Program Files\MultiCommander\MultiCommander.exe" -TABSESSION="Arbeitsplattform" -T="1 Arbeitsplattform"For using this is the Software AutoSizer needed because otherwise the Taskbar Icons will not created.,4403.0.html

Support and Feedback / Re: Folder Users -> Benutzer
« on: October 15, 2022, 17:23:46 »
No. The native Folder Name is "Users" and i find it is good that MC dont use the translated names of the standard-folders.

Support and Feedback / Context Menu only with double click available?
« on: October 04, 2022, 10:58:37 »
I dont like the double click for context menu. The keyboard have a context menu button. This is enough. Sometimes the context menu come with one click. maybe my mouse is defect? But it will be nice when the double click for the context meny can be disabled. But the Keyboard Key should always working.

If the files are not encrypted works this with the Extension "Find Files" Use just the Field "Match File Content (can be slow)".

try to turnoff spash
Thank you for this information, this help me and i have created this registry entry. This is good for my config, but solve not the problem.

1 Window stay in the foreground and the next instances will be started in the second layer. This is good, i can write that posting while my MC-Instances starting........ But only the first instance have a taskbar icon and the rest not.

But i found now a solution for the Problem with a very old program which until now very well works. This is called: AutoSizer. Also to Win XP Times i worked already with this program. It works with 64 bit Systems.

Just create a Class name based entry for MC in AutoSizer with "Action to perform" to "Maximize" because MC never start minimized. For Creating the Taskbar icons of the MC instances must the Option: "Automatically bring AutoSized windows to the foreground" enabled and use
Code: [Select]
Timeout 5 between the Strings. Then can i just press the "AutoSize Now! shortcut key" and the Taskbar Icons will be created. If it not works change the Action to perform zu "Minimize", Autosize, and then back to Maximize and press then always Ctrl+D before you close the Windows or shutdown the Computer. This is easier than Process Explorer>Window>Bring to front.

Also why are you starting it in the background ? what issue are that solving ?
The Batch File do it in this way and by the way, the /min parameter works not. I replaced Start with Start /min, this should work, but no instance started minimized. Just one window stay in the foreground and the other starting behind them in the second layer. This is without the /min parameter the same.

Yes i mean not running in the background, but running without a task bar icon is maybe the same like running in the background?

Why is this only with MC so? All other Programs can be started with multiple instances via  batch file. I have tested this with the 2 methods for recreating the issue.

I guess this will never be solved.... I make a Windows Update to 22H1 this weekend. Maybe then is the behavior different, but i dont believe.

When move i to Windows 11?
Then when Win 10 no longer developed.

Pages: 1 [2] 3 4 5 6 ... 13