26
Feature Requests and Suggestions / Split / Combine files
« on: July 23, 2022, 13:17:16 »
I sometimes use this feature and have to use another filemanager for it. Would appreciate it if it's in MC.
News:
MultiCommander v14.1 is released!
Show Posts
This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.
27
Support and Feedback / Re: Mc generating multiple c:\ tabs behind my back
« on: July 12, 2022, 12:29:51 »
Matthias it could indeed be locked tabs that generate a new one. I will keep an eye on it. Thank you.
28
Support and Feedback / Mc generating multiple c:\ tabs behind my back
« on: July 08, 2022, 18:29:06 »
Hi,
What could cause mc to generate extra c:\ tabs? Always on the right pane at the end, just now i counted 19! Or maybe it does it when i'm working with it and i just don't see it..
I have mc always running, never close it down.
What could cause mc to generate extra c:\ tabs? Always on the right pane at the end, just now i counted 19! Or maybe it does it when i'm working with it and i just don't see it..
I have mc always running, never close it down.
29
Beta Releases / Re: Version 12 * BETA *
« on: June 17, 2022, 20:09:28 »
I tried the beta again, it works ok now, if it doesn't anymore, i'll come screaming. 
30
Beta Releases / Re: Version 12 * BETA *
« on: June 17, 2022, 19:51:21 »
Hi Mathias,
I reverted to the non beta. Everytime mc got focus, from alt-tab and back for instance, it created a new tab on C: on the right side. After a while, i had several extra c: tabs.
I reverted to the non beta. Everytime mc got focus, from alt-tab and back for instance, it created a new tab on C: on the right side. After a while, i had several extra c: tabs.
31
Support and Feedback / what a great software this is
« on: August 23, 2021, 16:50:38 »
Just my appreciation, thank you.
32
Support and Feedback / Re: can't find "Open in New Tab"
« on: July 04, 2021, 18:49:17 »
Thanks Mattias, got it working, nice feature.
33
Support and Feedback / can't find "Open in New Tab"
« on: July 04, 2021, 15:01:58 »
Excuse for being dumb but i can't find it. Where is it?
34
Support and Feedback / multirename and iso / utf issues
« on: November 09, 2020, 15:55:28 »
Hello,
I downloaded a bunch of youtube movies and i'm having trouble with iso encoding in filenames.
I was hoping multirename would help but if i for instance try to rename Dvorák to Dvorak it does not rename those files.
I have lots of these files so i'm really hoping for an automated solution, i tried some tools but had little succes.
I downloaded a bunch of youtube movies and i'm having trouble with iso encoding in filenames.
I was hoping multirename would help but if i for instance try to rename Dvorák to Dvorak it does not rename those files.
I have lots of these files so i'm really hoping for an automated solution, i tried some tools but had little succes.
35
Beta Releases / Re: v10.0 RC 2733
« on: October 29, 2020, 07:59:26 »
Wow, it works great, thanks.
If it is unchecked so that it does not auto switch tab , pressing ctrl+shift will force it to switch tab
36
Beta Releases / Re: v10.0 RC 2733
« on: October 28, 2020, 17:38:22 »
Mathias, while it's great to be able to just drag outside Mc to another app, copying / moving something to another tab in Mc with this setting is not possible anymore. While dragging a file over a tab the cursor changes into a + indicating that it could be copied / moved but releasing the cursor does not do anything.
Could you make it dependant on whether control or alt is pressed when you start to drag? That way we could have both worlds. Ctrl-drag will not change to a tab but a normal drag will, or something like that.
Thanks.
Could you make it dependant on whether control or alt is pressed when you start to drag? That way we could have both worlds. Ctrl-drag will not change to a tab but a normal drag will, or something like that.
Thanks.
38
Beta Releases / Re: v10.0 RC 2733
« on: October 27, 2020, 12:37:24 »
Please how about the option to not change tabs when dragging a file out of MC? Still can't find it.
Also where is the changelog for 2735 please?
Also where is the changelog for 2735 please?
39
Support and Feedback / Re: How to color panels ?
« on: October 04, 2020, 10:35:59 »
See configuration - Explorer panel settings - Colors - Active/Inactive panel.
40
Support and Feedback / Re: when a share is closed, mc becomes unresponsive
« on: September 29, 2020, 18:32:33 »
In the bar with the virtual drive buttons, Mc displays a red cross if a network share is not present, however if i right click on it to try and disconnect it, it shows 'not responding' for a while.
Can't it just disconnect such a drive and remove the icon?
I suspect this is a cause for the general unresponsiveness and long loading times that i sometimes when (re)starting Mc when it tries to load disconnected drives.
Can't it just disconnect such a drive and remove the icon?
I suspect this is a cause for the general unresponsiveness and long loading times that i sometimes when (re)starting Mc when it tries to load disconnected drives.
41
Beta Releases / Re: v10.0 b2725
« on: September 23, 2020, 10:08:03 »
Yes FTP is working again here.
42
Beta Releases / Re: v10.0 Beta 2728
« on: September 23, 2020, 10:06:23 »
ADDED - Option to now activate tab when dragging over a tab when dragging files
You mean to *not activate the tab?
Where is that option please?
Ftp is working again..
You mean to *not activate the tab?
Where is that option please?
Ftp is working again..
43
Beta Releases / Re: v10.0 b2725
« on: September 21, 2020, 08:43:53 »
I could not find anything for ftp, no icon in the top bar with virtual devices, no entry in the drop down list.
After installing the previous version both are back.
After installing the previous version both are back.
44
Beta Releases / Re: v10.0 b2725
« on: September 20, 2020, 19:12:40 »
I couldn't get ftp to work in the beta, ftp seemed just gone. Reverted to previous version for now.
45
Support and Feedback / Re: dragging a file over the tabs area.
« on: September 20, 2020, 07:24:50 »
You can see me jumping in the air now
46
Beta Releases / Re: v10.0 b2725
« on: September 19, 2020, 20:29:27 »
Is there a changelog for this beta? I only saw it when updating but can't find it elsewhere.
47
Support and Feedback / Re: dragging a file over the tabs area.
« on: September 19, 2020, 20:24:15 »
Maybe you could make it so that if you press shift when dragging, it won't change the tab. That way one would have both ways.
48
Support and Feedback / Re: when a share is closed, mc becomes unresponsive
« on: September 19, 2020, 13:04:38 »
I understand. But i still have a feeling there's something not quite ok because total commander and dopus both had less issues with this on my machine. This is the one reason i used those other ones because i do prefer mc for several reasons.
I have the same issue with an usb drive, it goes asleep so it takes a bit time to wake up if i access it, but mc sometimes takes a long time, more than is required for the drive to wake up.
If i get impatient on these unresponsive listers and forcibly restart mc, the splash window says 'loading configuration' for awhile.
A month ago i couldn't get mc to start up anymore, it just kept on saying loading configuration. I installed it anew onto another map, and than it worked ok again.
Maybe this is some help? Keep up the great work please.
I have the same issue with an usb drive, it goes asleep so it takes a bit time to wake up if i access it, but mc sometimes takes a long time, more than is required for the drive to wake up.
If i get impatient on these unresponsive listers and forcibly restart mc, the splash window says 'loading configuration' for awhile.
A month ago i couldn't get mc to start up anymore, it just kept on saying loading configuration. I installed it anew onto another map, and than it worked ok again.
Maybe this is some help? Keep up the great work please.
49
Support and Feedback / Re: dragging a file over the tabs area.
« on: September 19, 2020, 12:53:51 »
Yes i thought that would be the reason. I had opus installed, that one did not change the tab and still did copy to another tab, i don't have it installed anymore so i can't check.
An option for this would be great! Thanks.
An option for this would be great! Thanks.
50
Support and Feedback / Re: how to call the WINDOWS Terminal?
« on: September 15, 2020, 21:03:01 »
Install conemu, drag it's exe to the upper buttonbar in Mc, it becomes a qucik launch button and you can set it's parameters like -dir "${sourcepath}"
Alternatively you can go to settings in conemu, integration, default term, check Force conemu as default terminal and add multicommander.exe to the list of executables there.
Alternatively you can go to settings in conemu, integration, default term, check Force conemu as default terminal and add multicommander.exe to the list of executables there.