Show Posts

This section allows you to view all posts made by this member. Note that you can only see posts made in areas you currently have access to.


Messages - Jean

Pages: [1] 2 3
1
Support and Feedback / multirename and iso / utf issues
« on: November 09, 2020, 15:55:28 »
Hello,
I downloaded a bunch of youtube movies and i'm having trouble with iso encoding in filenames.
I was hoping multirename would help but if i for instance try to rename Dvorák to Dvorak it does not rename those files.
I have lots of these files so i'm really hoping for an automated solution, i tried some tools but had little succes.

2
Beta Releases / Re: v10.0 RC 2733
« on: October 29, 2020, 07:59:26 »
Wow, it works great, thanks.

If it is unchecked so that it does not auto switch tab , pressing ctrl+shift will force it to switch tab

3
Beta Releases / Re: v10.0 RC 2733
« on: October 28, 2020, 17:38:22 »
Mathias, while it's great to be able to just drag outside Mc to another app, copying / moving something to another tab in Mc with this setting is not possible anymore. While dragging a file over a tab the cursor changes into a + indicating that it could be copied / moved but releasing the cursor does not do anything.

Could you make it dependant on whether control or alt is pressed when you start to drag? That way we could have both worlds. Ctrl-drag will not change to a tab but a normal drag will, or something like that.

Thanks.

4
Beta Releases / Re: v10.0 RC 2733
« on: October 28, 2020, 15:18:04 »
Thanks Mathias.

5
Beta Releases / Re: v10.0 RC 2733
« on: October 27, 2020, 12:37:24 »
Please how about the option to not change tabs when dragging a file out of MC? Still can't find it.
Also where is the changelog for 2735 please?

6
Support and Feedback / Re: How to color panels ?
« on: October 04, 2020, 10:35:59 »
See configuration - Explorer panel settings - Colors - Active/Inactive panel.

7
In the bar with the virtual drive buttons, Mc displays a red cross if a network share is not present, however if i right click on it to try and disconnect it, it shows 'not responding' for a while.
Can't it just disconnect such a drive and remove the icon?
I suspect this is a cause for the general unresponsiveness and long loading times that i sometimes when (re)starting Mc when it tries to load disconnected drives.

8
Beta Releases / Re: v10.0 b2725
« on: September 23, 2020, 10:08:03 »
Yes FTP is working again here.

9
Beta Releases / Re: v10.0 Beta 2728
« on: September 23, 2020, 10:06:23 »
  ADDED - Option to now activate tab when dragging over a tab when dragging files

You mean to *not activate the tab?
Where is that option please?

Ftp is working again..

10
Beta Releases / Re: v10.0 b2725
« on: September 21, 2020, 08:43:53 »
I could not find anything for ftp, no icon in the top bar with virtual devices, no entry in the drop down list.
After installing the previous version both are back.

11
Beta Releases / Re: v10.0 b2725
« on: September 20, 2020, 19:12:40 »
I couldn't get ftp to work in the beta, ftp seemed just gone. Reverted to previous version for now.

12
Support and Feedback / Re: dragging a file over the tabs area.
« on: September 20, 2020, 07:24:50 »
You can see me jumping in the air now :)

13
Beta Releases / Re: v10.0 b2725
« on: September 19, 2020, 20:29:27 »
Is there a changelog for this beta? I only saw it when updating but can't find it elsewhere.

14
Support and Feedback / Re: dragging a file over the tabs area.
« on: September 19, 2020, 20:24:15 »
Maybe you could make it so that if you press shift when dragging, it won't change the tab. That way one would have both ways.

15
I understand. But i still have a feeling there's something not quite ok because total commander and dopus both had less issues with this on my machine. This is the one reason i used those other ones because i do prefer mc for several reasons.
I have the same issue with an usb drive, it goes asleep so it takes a bit time to wake up if i access it, but mc sometimes takes a long time, more than is required for the drive to wake up.
If i get impatient on these unresponsive listers and forcibly restart mc, the splash window says 'loading configuration' for awhile.
A month ago i couldn't get mc to start up anymore, it just kept on saying loading configuration. I installed it anew onto another map, and than it worked ok again.
Maybe this is some help? Keep up the great work please.

16
Support and Feedback / Re: dragging a file over the tabs area.
« on: September 19, 2020, 12:53:51 »
Yes i thought that would be the reason. I had opus installed, that one did not change the tab and still did copy to another tab, i don't have it installed anymore so i can't check.
An option for this would be great! Thanks.

17
Support and Feedback / Re: how to call the WINDOWS Terminal?
« on: September 15, 2020, 21:03:01 »
Install conemu, drag it's exe to the upper buttonbar in Mc, it becomes a qucik launch button and you can set it's parameters like -dir "${sourcepath}"
Alternatively you can go to settings in conemu, integration, default term, check Force conemu as default terminal and add multicommander.exe to the list of executables there.

18
Support and Feedback / dragging a file over the tabs area.
« on: September 15, 2020, 19:57:46 »
Hi,
I do this often, drag a file from somewhere into another program, browser etc.
When the drag crosses the tabs area, the tab changes to where to mouse crosses there.  Now i have to aim my drag so it crosses the current tab.  If i don't do that, another tab gets focus which is not what i want. I hope you can understand.
Thanks.

19
Support and Feedback / when a share is closed, mc becomes unresponsive
« on: September 15, 2020, 19:53:54 »
For instance i have a network share to my laptop form the deskop. If i turn off the laptop then on the deskop Mc becomes unresponsive. It was minimized so i tried to maximize it but i got a blank screen and i had to wait a minute or so. There are also variations when it just says 'not responding', but always with either a network share or an ftp tab that has lost connection.
I'd love to see this fixed and have my fav filemanager become more stable.

20
I have a lot of favourite folders, i'd love a long list to pick from. Thanks.

21
Well i did this, skipped a file from the cue.
Then the lower progress said the files were moved 100% while the above progress bar happily continued to move files.  ;D (fortunately)

22
Mathias no need to clutter the ui, i wouldn't mind some ini file like

Code: [Select]
[red]
c:\in
d:\in

or

c:\in=red
etc or something like that.

23
Script / Re: Is it possible to append text to a file?
« on: April 25, 2020, 13:11:45 »
maybe addarray / savearray / loadarray?

24
Support and Feedback / Re: search files
« on: April 15, 2020, 14:24:15 »
Yes i think that was my mistake, thanks again.

25
Support and Feedback / Re: search files
« on: April 15, 2020, 12:05:14 »
Mathias, i get the error again, look at the pic, it's supposed to find Adams*.ab, as you can see the file is present but the search results are empty. Explorer finds the file. It's the only search criterium, i don't see what i'm doing wrong.
Then i switched to normal mode, did the same search and now it finds them all.
Can't make much sense of it, seems very random.

Pages: [1] 2 3