Messages

176

Support and Feedback / 3 Instances are open but 6 running and 1 need permanently cpu time.

« on: March 23, 2018, 10:03:39 »

Strange, watch the attachment unter MultiCommander.exe

177

Feature Requests and Suggestions / Multicommander protecting folders, this folders can't be deleted or renamed

« on: March 23, 2018, 09:50:10 »

Sometimes Multicommander protecting folders also after all activities ended. Without any reason. This folders cant be renamed or deleted and cant used by other Software until Multicommander terminqated. Sometimes also when the folder already deleted. I deleted accidentally a folder with gpx and osm files and recovery with Acronis True Image doesn't work until MC terminated.

178

Support and Feedback / Re: Best explorer panel fonts to use withhigh-res screens

« on: March 08, 2018, 13:44:32 »

1080 is no longer high res. 4k is high res now. Use Verdana for best results on all screens. And you should test how it look without cleartype or you can change the cleartype settings: Press Win + R and type cttune.exe and press enter and run the wizard or disable it.

Maybe your screens are not rigt calibrated. Are they with hdmi connected or dvi or crt or display port?

179

Support and Feedback / Re: Do not open alot of Tabs when starting MC

« on: February 19, 2018, 00:39:22 »

If you do not want it to remember all opened tabs then turn that off.

Where can i turn this off? Sorry i was searching now for a while and can't find a "remember all opened tabs"-option.

But the solution is: Core Settings> Startup> Tab Session> Autoload the tab session marked as: Load at startup

And creating a small tab session and mark this for Load at startup with File> Tab sessions> manage> Autoload this tab session at startup

180

Support and Feedback / Re: Do not open alot of Tabs when starting MC

« on: February 18, 2018, 18:56:02 »

No, i don't like it when MC loading so many tabs with the same folder without any reason. Not i opened all this tabs, MC do this automatically while starting and this is not good. It seems to be hard to understand my bad english, sorry.

Moving to Support and Feedback was not necessary, because it's definitely a "Feature Requests and Suggestions" Thread.

181

Support and Feedback / Re: Typing a letter does not find the first file and right-click not working

« on: February 18, 2018, 18:46:15 »

1. When I'm in the explorer pane and I type a letter, it used to go to the first file that starts with that letter. On the new computer, when I type a letter it types the letter in the Command Line Field at the top, and does not go to the first file with that letter.

Press Ctrl + Alt and type a letter, this works. This is the feature.

2. When I right-click on a file in the explorer pane nothing happens.

Please use a double right click, or the Keyboard Butten left beside the right Ctrl Button.

182

Support and Feedback / Re: Do not open alot of Tabs when starting MC

« on: February 13, 2018, 08:06:53 »

I don't know why they are empty.

They are not empty, but the path is most time C:\

Please watch my screenshot, there can you see my settings and how it look when MC open all this Tabs with the Path C:\

183

Support and Feedback / Do not open alot of Tabs when starting MC

« on: February 12, 2018, 09:03:46 »

Always when i start MC it open alot of empty tabs. I guess its enough to load 1 tab for each panel when starting MC. It seems this have to do with the last closed MC instance. If the last closed MC Instance have only 3 tabs, MC will open 3 empty tabs on next start.

184

Documentation / Re: design the homepage in two columns?

« on: January 17, 2018, 00:07:40 »

?? Eh
I Dont understand

He want a Frameset that the left column with the Links stay when scrolling the right column with the content.
Maybe using the PDF Documentation will solve the problem:
http://multicommander.com/files/MultiCommander_Doc.pdf

185

Support and Feedback / Re: column width of the file extensions

« on: January 16, 2018, 23:43:32 »

Is there a way to save the column width?

Right Mouse Click at a column header> "save currewnt layout as default"

186

Support and Feedback / Re: Favorites: How to setup the left and right explorer panel with one favorite

« on: December 26, 2017, 17:40:52 »

You want to lock a tab to a path ?
or do you want a tab to always start with a path ?

No he want to start a path for source panel and a path for target panel with only one favorite icon like in TC. For me is this not relevant because i don't use favorite icons.

187

Feature Requests and Suggestions / Folder Tree should show the content of the folder with Keyboard only

« on: December 19, 2017, 15:26:27 »

The Folder Tree show the content of the folder only after a mouse click of the folder and when using the Keyboard Arrows happens the folder is just selected but the content is not in the panel. When using the enter key, the focus move to the panel and only after a mouse click in thje folder tree is browsing of multiple folders possible. Thats really not good. I watched the settings but there is no option for changing this.

188

Beta Releases / Re: Multi Commander v7.6 BETA

« on: December 13, 2017, 19:08:27 »

Yes, sorry, it have nothing to do with the new beta. But the same in other protected folders and not only with shortcuts, the same issue with files. But i have a thread for this problem, sorry for harassing you with this very old problem.

189

Beta Releases / Re: Multi Commander v7.6 BETA

« on: December 12, 2017, 12:53:58 »

Specially when it works for me

For repeat you must go in your own startmenu folders and trying to move a file from a subfolder to another subfolder when the same File in the target folder already exists. Please watch my screenshot for the paths. Folders should cause the admin-mode, without admin mode no repeat possible.

Or use the following paths:
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\
C:\ProgramData\Microsoft\Windows\Start Menu\Programs\Microsoft Office 2016\

190

Beta Releases / Re: Multi Commander v7.6 BETA

« on: December 08, 2017, 17:20:41 »

1. Copy works and moving works not, thats strange.
2. It was a old macromedia Flash player for a digital Book still open after the book closed, this was disturbing the MC Speed.
3. Yes i know. I was off topic writing about Windows and not about MC. Maybe dont read Off topic

keep the good work.

191

Beta Releases / Re: Multi Commander v7.6 BETA

« on: December 08, 2017, 12:50:03 »

AlreadyExistsDialog

Sorry i don't need this. A copy option in a folder with already existing files is no option and should be made with a synchronizing software. Sometimes when i moving new startmenu shortcuts i take MC and they already exist sometimes when it is only a update of a shortcut. Then i trying to move and overwriting at the same time and MC fail and the MC Dev won't fix this problem which have nothing to do wich my special setup - sorry.

It seems the Startup of MC is now longer and Loading Tab Sessions need more time also when Excel and other disturbing Software off.

OT
Some new Shortcuts are different to the old ones and protected for manual editing, this shortcuts have to be replaced. I use Classic Shell and i did my Start menu also in Win XP in my own order. If you watch Linux KDE, they have a good order in the start menu (but not for wine programs). I guess this is not just my idea, i have it stolen by KDE, but was searching for a better order before i tested KDE. Sometimes when i was writing something against Microsoft, the stupid order in startmenu is always a good argument, and the useless new startmenu attempts.... Not necessary talking about, this is all only Klickibunti.

192

Support and Feedback / Re: Active Side every Time 75:25

« on: November 06, 2017, 16:07:14 »

Ah, sorry i was wrong. This what you mean with "active window" is called "Source Panel". You want that the Source-Panel width should be always 75%  and the Target Panel width 25%. And i think, like Jungle said, it´s probably not possible. But if you need more width in the Source Panel, just use Ctrl+ F11 for 100% and Ctrl+ F11 (full pane width ) again to get back to the previous split size.

May use a english version to know how the features called.

Save your Tab sessions just in such a way that the source panel always at the left side, then can you maybe working with a permanent split size of 75:25.

193

Support and Feedback / Re: Active Side every Time 75:25

« on: November 05, 2017, 15:17:47 »

Yes this is possible with the small Tool AutoSizer. This very useful Program works very well in Win 10 64 bit.

194

Support and Feedback / Re: Save open tabs to current tab session on exit

« on: October 31, 2017, 13:59:17 »

No it is not possible. And for me, i don't need this. I save some sessions only when the session created and never again. If you do the focus in the first line with the parent directory link, the focus will everytime there and a daily saving of tab sessions is obsolete.

195

Feature Requests and Suggestions / Re: Starting a new Instance should work with Ctrl+N

« on: October 22, 2017, 22:45:49 »

It is Possible! Sorry i needed much time for this idea.

Configuration> User defined Commands> New (+Button)> Give the new command a Name> Command Type: Internal Commands> Module: Multicommander (Base)> Command: Multi Commander (This Command is ca. in the middlew of the list after New)

196

Support and Feedback / Re: MC have a Problem with the Fall Creators Update (1709) of Windows 10

« on: October 15, 2017, 16:35:04 »

It was de facto not after i installed the 1709 Windows, it was after i installed Acronis True Image 2018. Now i have it removed and MC64 run again like everytime and need max a half minute cpu time for loading this test-session. I can't understand why the 64 bit MC have this problem, because Acronis True Image is also in Version 2018 still a 32 bit Software.

I reinstalled Acronis True Image and This Issue is not reproducable. Now MultiCommaner and Acronis True Image works together.

I can't understand this issue by myself. Maybe this all have to do with C++.

197

Support and Feedback / Re: MC have a Problem with the Fall Creators Update (1709) of Windows 10

« on: October 15, 2017, 16:07:28 »

Is it only if you load tabs ?? if you go to all those location manually it works ?

If i go to such a location the CPU Usage will faster finished, but need also very much more time than normal.

Also if all icons in cache run it ca 15 min. But if it this 15 min finished, it is able to load this session without this issue. After restarting MC it need 15 min again. MC32 bit Edition 7.5 need for the same a half minute.
Also the creating of the icon cache need a long time, i guess 5 min. But maybe it have nothing to do with the icon cache, because after the icon cache finished it take 10 min CPU Time. It use only 1 Core for this.

198

Support and Feedback / MC have a Problem with Acronis True Image 2018

« on: October 14, 2017, 23:18:28 »

If loading a bigger Tab Session, the CPU Usage will never end, also not after a long time. The 32 bit Version of MC works good without this error.

199

Feature Requests and Suggestions / Re: Restrict Folder Tree if Tab locked

« on: October 05, 2017, 13:58:14 »

Thats a good Idea. I suggested something similar: http://forum.multicommander.com/forum/index.php/topic,2011.0.html

200

Feature Requests and Suggestions / Starting a new Instance should work with Ctrl+N

« on: October 02, 2017, 12:13:31 »

I was trying to create a keyboard Shortcut, but i didn't find a possibility.