Messages

1

Beta Releases / Re: 15.5 Beta

« on: July 03, 2025, 11:02:24 »

So it works in previous version ? Sure ? because absolutely nothing about how that works is changed,

I think I had forgotten that after renewing the automatic restoration of the windows, I have to manually close all instances and restart the batch file. The error occurs when I simply shut down the system without closing and restarting beforehand. I use Windows 10 and will probably buy the Extended Support in October and then continue to use Windows 10 for at least half a year longer than the last update was.

"Autosizer" ? 3rd party tool ? why you need that for MC.? what does it to ?

This tool is not the reason. This is only a small, very old tool, and if I remove this tool, I can only bring that instances visible with SystemInformer.

2

Beta Releases / Re: 15.5 Beta

« on: July 01, 2025, 11:33:59 »

The restoration of window size has changed since the last beta version. "Restore" works exactly once to bring windows that did not appear on the taskbar onto the taskbar, and the second time the windows remain in limbo. Previously, with Autosizer, I only had to set the window size and position once, and for subsequent system starts, I used the restore function. Now, this only works for one system start, and the next time the windows end up in limbo again and can only be retrieved with the setup of position and size. So now I have to change the configuration of Autosizer every second system start.

3

Support and Feedback / Re: The deletion of large directories does not work.

« on: June 15, 2025, 10:02:28 »

I don't have FF.  I can't reproduce that.
 
There was no error before that, that it failed to delete some files in the folder ? Is the folder empty?
Is the folder a real folder ? or special virtual files that FF hook into to do special stuff with?

The problem also occurred with other folders that came from a smartphone backup using MPE. The error message may vary, but it never offers the option to delete the files or end processes that might be preventing it.

Matthias515566,

I also have Firefox and have many "idb" folders deep within my profile storage archives, in paths similar to the one in your error log message. I've checked the properties for about half a dozen of them and they all show read-only attributes for the folders, and most or all of them contain additional read-only subfolders. You might need to clear that attribute from any folders you want to delete and they might be protected by some other running process.

That's an interesting point, but when files are in use, there is the option to terminate the corresponding processes, which isn't offered here. Also, nothing changes when running MC as an administrator, and the Windows Explorer deletes the respective folders without any issue.

4

Support and Feedback / Re: The deletion of large directories does not work.

« on: June 13, 2025, 13:13:54 »

The files do not need to be locked in order to reproduce the error. All the affected folders so far I have been able to delete easily using Windows Explorer. For testing, you can use a copy of a Firefox profile folder that contains many files.

Here is the text from the log:
2025-06-13 13:02:23.390 Failed to delete folder (163) : C:\Users\%yourusername%\AppData\Roaming\Mozilla\Firefox\Profiles\ovxoz3y4.default-esr - Kopie\storage\archives\0\2025-06-03\default\https+++www.youtube.com^partitionKey=%28https%2Cxn--verschwrungstheorien-99b.info%29\idb
2025-06-13 13:02:23.390 Handle file Operations error : 163 (0) - Can not delete directory. It is not empty.

5

Beta Releases / Re: 15.5 Beta

« on: June 12, 2025, 20:01:26 »

Thank you that the new tabs now open next to the active tab.

6

Support and Feedback / The deletion of large directories does not work.

« on: June 12, 2025, 19:59:49 »

The error message appears: "Folder is not empty! Cannot delete folder 'Foldername'."

7

Feature Requests and Suggestions / Re: File List View in Explorer Panel

« on: June 10, 2025, 19:23:18 »

I would like to have the file list view panel in the Explorer Panel to automatically change to display details (name, ext, size, date, etc.) when details view is selected and display only the filename when list is selected. I haven't yet found a way to do that. If this a new feature or something that is already available and I haven't found how to geet to it?

Configuration > Explorer Panel Settings > View Mode Settings
Here you can choose various tooltip settings for the "Detailed View Mode" and the "List View Mode," but I think these tooltips are not comprehensive enough for you. Showing details in a separate panel is a great idea.

8

Support and Feedback / Re: 15.5 Opening multiple files with Enter no longer works.

« on: May 29, 2025, 10:58:01 »

I have updated to 3099, and now opening multiple files with the Enter key works again. So the issue must obviously be related to the MC code.

9

Support and Feedback / Re: 15.5 Opening multiple files with Enter no longer works.

« on: May 27, 2025, 21:04:13 »

Unlocker ?

This is a very old program for deleting protected files. I don't think this is the reason for the issue.
My antivirus, F-Secure, quarantined MuktiCommander.exe, most recently on May 22. If others don't have this issue, then some kind of system error must have crept in on my end.

10

Support and Feedback / Re: 15.5 Opening multiple files with Enter no longer works.

« on: May 27, 2025, 12:42:25 »

So there's no plan to ever fix this? And even a MultiScript can't handle it?

11

Script / Re: Open multiple files

« on: May 25, 2025, 11:33:18 »

It is a "External" Script. A very simple command:

Code: [Select]

"C:\Program Files\XnViewMP\xnviewmp.exe" "${focusfilepath}"

12

Script / Re: Open multiple files

« on: May 24, 2025, 20:18:40 »

This doesn't work. I guess I have to learn how to do multi-scripting, or you could give me a working example.

13

Script / Re: Open multiple files

« on: May 22, 2025, 21:33:08 »

Use MultiScript and get all selected files, and loop and call it each..

Or if it is CustomCommands type.. you can enable option for that command to 'run command separately for each selected files/folder'

But "FocusFilePath" only uses the file that is currently in focus, not all selected files.
I guess I need a different command for that.

14

Script / Open multiple files

« on: May 21, 2025, 17:50:10 »

I use "C:\Program Files\XnViewMP\xnviewmp.exe" "${focusfilepath}" to open the focused file with XnView. That doesn’t work for multiple selected files. How can I do that for multiple selected files?

15

Support and Feedback / 15.5 Opening multiple files with Enter no longer works.

« on: May 16, 2025, 22:28:29 »

If I have multiple files selected, I can no longer open them by pressing the Enter key. Instead, Unlocker was being launched, and after uninstalling Unlocker, nothing happens at all. The "Open" link from the context menu still works, and everything functions correctly in other file explorers.

16

Feature Requests and Suggestions / Re: Shaping the Future of MultiCommander - Your Feedback on Development Priorities

« on: May 13, 2025, 20:16:01 »

Printing what ? A text file ?  File list ?

Any file like Word document, PDF-Document. Or CAD. Select files to print and use the command.

17

Feature Requests and Suggestions / Re: Shaping the Future of MultiCommander - Your Feedback on Development Priorities

« on: May 08, 2025, 14:09:57 »

User defined commands for printing and “New Text Document”. New tabs should open next to the active tab instead of at the end of the tab bar.

18

Support and Feedback / Re: Possible Bug (15.4.0.3088)

« on: April 18, 2025, 12:32:22 »

I have the same problem. To access the files anyway, you have to double click into the field with the path and press Enter.

19

Support and Feedback / Re: Latest version of Multicommander detected as a virus

« on: April 18, 2025, 11:58:18 »

I have F-Secure and updated to 15.4 using MultiUpdate without any problems.

20

Support and Feedback / Re: Missing "New Text Document" Context Menu Item in MultiCommander on Windows 11

« on: April 13, 2025, 18:08:42 »

I don't want this button in the context menu, but rather as a custom keyboard shortcut in MultiCommander. Also, I would like to have a print button as well.

21

Support and Feedback / Re: Foldersize wrong if folder contains very long paths

« on: March 28, 2025, 10:01:00 »

Your screenshots do show the correct directory size, though.

22

Support and Feedback / Re: Can not move some files

« on: March 11, 2025, 05:52:52 »

I don't know. I cannot recreate that issue.

I can reproduce this issue. This is a very old bug, and I don’t understand why you are unable to reproduce it. For example, moving and replacing an existing file does not work in admin mode with protected files.

23

Support and Feedback / Re: No full-row select

« on: February 10, 2025, 23:55:39 »

To be able to turn it off, It been on the todo list for a while. Problem is that it will break a lot of other features/options. So it is not a quick fix. So because of that it been pushed a head.

That’s not important, and nobody needs it. I find it helpful that entire rows are highlighted, and I hate it the way it was in Windows XP.

24

Beta Releases / Re: v14.6 BETA

« on: February 02, 2025, 19:37:48 »

You mean 3066 and not 3064

25

Support and Feedback / Re: Switching Windows

« on: January 17, 2025, 10:48:58 »

You can save a Tab Session, and when reopened, the same panel will be highlighted as it was when saved.