Author Topic: How to always start with 50%/50% panels?  (Read 2825 times)

Klaas Hobo

  • Newbie
  • *
  • Posts: 7
    • View Profile
How to always start with 50%/50% panels?
« on: April 17, 2024, 08:32:05 »
I always have to re-adjust my panels to 50%/50% when starting MC. Where can I set that the % of panel width is always 50%/50%?

Also I would like to be sure then that column with is also sizing according to panel width (that is wider when panels width get bigger) and where to configure that?

Jungle

  • Contributor
  • VIP Member
  • *****
  • Posts: 524
  • Old Skull
    • View Profile
Re: How to always start with 50%/50% panels?
« Reply #1 on: April 17, 2024, 10:08:07 »
I always have to re-adjust my panels to 50%/50% when starting MC. Where can I set that the % of panel width is always 50%/50%?

There's an option under Menu Configuration > Core settings > Layout > Application layout > Panel Tab > Remember split size
With this option disabled MC should always restore 50/50 ratio

Also I would like to be sure then that column with is also sizing according to panel width (that is wider when panels width get bigger) and where to configure that?

Menu Configuration > Explorer panel settings > Display > Sorting and columns > Autosize columns

Klaas Hobo

  • Newbie
  • *
  • Posts: 7
    • View Profile
Re: How to always start with 50%/50% panels?
« Reply #2 on: April 17, 2024, 11:19:57 »
Thanks Jungle,
Remember split size;  I was thinking the other way around, not configuring it is better ;-)
And columns autosize is what I will try out for a while. Looks good thoug!