Messages

1

Support and Feedback / Re: tabs in dark mode

« on: Today at 12:31:49 »

When i check 'use hover color' on a green tab and click on another tab it reverts to default color again.
When i check it, it's only green as long as i hover.

I have some tabs that have colors to indicate some project or disk so i'd like use various colors but those should be solid, else it's not readable.
But tabs that have solid color only get their special color when clicked on, else they are the default.

2

Support and Feedback / Re: tabs in dark mode

« on: Today at 08:58:08 »

Something strange:
I have a few tabs with green color. Now if i right click on the tab and do Properties, then click Solid color, the visibility improves but if focus gets away from the tab it turns light-blue, the green color is gone, only when i hover it green comes back.
When 'use hover color when tab is active' is checked, the tab is green when hovered or clicked. When unchecked only when hovered.
What i'm trying to say, i can't get 'Solid color' with my desired green color, it reverts to light blue. I must be doing something wrong.

3

Support and Feedback / Re: tabs in dark mode

« on: Yesterday at 15:32:05 »

Great, much better, thanks!

4

Support and Feedback / tabs in dark mode

« on: Yesterday at 11:04:56 »

Hi Mathias,

I'm trying out dark mode. On the tabs only the path of the current active tab is readable.
And i would love to increase font size on the tabs.
Thanks as always.

5

Support and Feedback / Re: it always takes so long

« on: June 17, 2025, 13:27:04 »

Yes sorry i meant that. I have enabled it back again, i don't like when i rename something and have to refresh the window. I wish one could set that timeout in windows. Never mind, thanks for the best filemanager.

6

Support and Feedback / Re: it always takes so long

« on: June 17, 2025, 07:45:56 »

Thank you, i have enabled it, i'm gonna try it out, it might be the solution i'm looking for.

7

Support and Feedback / it always takes so long

« on: June 16, 2025, 14:58:28 »

Hi Mathias,

When i close my laptop (so it goes to sleep) and go to my desktop where a share was open to the laptop, it always takes a minute or more before MC becomes responsible again.
Is there anything you can do?

8

Support and Feedback / Re: Ftp won't connect

« on: May 06, 2025, 15:45:48 »

I'm getting familiar with re-using those ftp connections, never did that much, always tried a new connect.
Thanks again Mathias, great software.

9

Support and Feedback / Re: Ftp won't connect

« on: May 06, 2025, 14:06:16 »

'You are not allowed to have more than 5 connections at the same time'.
On the bar with ftp i can see 3 older connections, clicking on them gives me a map on the server, it did not do that before.
Will let you know if i run into troubles again.

10

Support and Feedback / Ftp won't connect

« on: May 06, 2025, 12:49:55 »

The first time it connects, the second time i always have to restart MC before i can get a connection.

11

Script / Re: script does not open new window anymore

« on: January 23, 2025, 07:47:50 »

Works, thanks Mathias.

12

Script / script does not open new window anymore

« on: January 22, 2025, 15:29:00 »

Hi Mathias,

This used to create a new tab in the other panel but currently it uses an old one, regression maybe?
Thanks

Code: [Select]

MC.SetActivePanel PANEL=TOGGLE
MC.Explorer.NewBrowser
MC.Explorer.Goto PATH=FTP:\example.com


13

Feature Requests and Suggestions / Re: multidataviewer in tab instead of separate window

« on: December 19, 2024, 09:22:38 »

Mathias you're a genius.

14

Feature Requests and Suggestions / multidataviewer in tab instead of separate window

« on: December 19, 2024, 07:05:41 »

I'm using MC for years now, for me it beats all others, even the expensive paid ones.
The one feature i miss is total commander's view text feature where you can scroll through files in one tab, and get to see the (text) contents in the other.
I wouldn't need it to do pics as well but since you already have that code in the multi viewer it could as well do it to, but it's not part of my request.

Thanks Mathias.

15

Support and Feedback / Re: Find Files finds nothing when invoked a second time with a different search

« on: September 27, 2023, 06:57:22 »

hi Mathias,
Can't reproduce it. I will get back if i can.

16

Support and Feedback / Find Files finds nothing when invoked a second time with a different search

« on: September 19, 2023, 13:25:26 »

At least that is what i see here. Have to select a new RES for the search.

17

Support and Feedback / found a way around long waits

« on: June 02, 2023, 11:38:51 »

I've complained before about long waiting times when copying a file, sometimes over a minute.
I found that if this starts (windows present a wait cursor)  i can start explorer and browse to the the destination folder, the moment i hit that folder, mc commences to copy and the wait is over.

18

Beta Releases / Re: v13.0 **BETA**

« on: May 09, 2023, 18:14:53 »

the cpu problem does not happen on the laptop.
On the desktop, if i close all panels, the cpu goes to 0, opening just one panel and it goes to 6.6.

fixed it by importing the settings from the laptop, cpu is back to normal.

19

Beta Releases / Re: v13.0 **BETA**

« on: May 09, 2023, 17:51:28 »

i got 'bad gateway' trying to upload, maybe because the filesize is quite big, 154mb, i've put it here https://jcremers.com/MultiCommander.DMP
The file shows nothing in nirsoft bluescreenview though.

Mc taking longer to respond is what i see on two pc's here. You've told me before it only uses windows api but i can't help seeing a big difference, sorry.

20

Beta Releases / Re: v13.0 **BETA**

« on: May 09, 2023, 16:06:06 »

Mathias i have a widget on the desktop that shows cpu for processes. This mc beta shows between 6 and 7% cpu being idle. I never saw that before so i downgraded to latest stable and cpu use is normal again, so low it doesn't even show up anymore.
Also where is the page to download older beta's please, the previous one was working fine.

Also, while i have your ear, for me a weak point in mc, my favorite filemanager, it how it handles a network share that is gone, it does not respond for a long time, no other filemanager takes so long.

21

Support and Feedback / Re: internal error?

« on: April 08, 2023, 11:34:24 »

I still get a hanging MC for a minute or more every once in a while copying a file.

22

Support and Feedback / Re: internal error?

« on: February 27, 2023, 23:12:19 »

Mathias the problem with the network shares is gone now i've disabled those drive's in settings.

The other problem, some 16 seconds wait before a copy, did not happen again since yesterday. Maybe it was something temporary from a windows update i don't know but i'm relieved, fingers crossed.
I don't want to use another filemanager.

23

Support and Feedback / Re: internal error?

« on: February 27, 2023, 22:32:10 »

I guess that it is the first time you do a copy.
Because the first time it will check devices and what type they are to check what Read/write statergy to use.

This is new behaviour, MC did not do this before, also explorer and others have no delay.

in Core Settings > FileSystem > Tweak
You can select devices to hide. Devices here will not be checked at startup. However I do think they are check the first time you do a copy..

This works, thanks.

24

Announcements and News / Re: New WebPage (But still the same)

« on: February 26, 2023, 21:22:17 »

Mathias, the page with old downloads doesn't work.

25

Support and Feedback / internal error?

« on: February 26, 2023, 18:33:33 »

Mathias i have some troubles.
A file copy takes some 16 seconds before the overwrite confirmation dialog appears, log:

Code: [Select]

2023-02-26 18:27:34.133 Unable to open target file : C:\Pd\pd.ini.bak ( Error code : 10, Internal Error Code : 80)
2023-02-26 18:27:34.133 Handle file Operations error : 10 (80) - File/Folder already exists
2023-02-26 18:27:40.090 Copied : "D:\in\pd.ini.bak" => "C:\Pd\pd.ini.bak" - 14933 bytes in 1ms 0ms Total : 0ms - Average Speed : 14933000 bytes/sec (14.2 MB/sec), Read data time 1ms (14.2 MB/sec), Write data time 1ms (14.2 MB/sec)

Also i have slow startups because of unavailable network drives (sometimes also virtual cd drive):

Code: [Select]

2023-02-26 18:31:21.323 [Device Manager] - Get Drive Information of : M:
2023-02-26 18:31:41.062 [Device Manager] - Get Drive Information of : Z: